Oil tank / palm oil tank

Krampitz Speiseöl - Tanks / Palmöl - Tanks

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Nwsdsv N Di Aepfx Ag Toh Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power Njdpjvgmr Isfx Ag Towh !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways Nwsdpsib H Ddefx Ag Teh - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Nodpfevvizkox Ag Towh Storage location: Garbsen

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Nwedpfotxc Itox Ag Tjh

Condition: good (used), Year of construction: 2002, functionality: fully functional, Initial commissioning: 2002 Control: Heidenhain iTNC530 Nwedsyzz R Hopfx Ag Toh Machine hours: to follow X-axis: approx. 6,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,100 mm A-axis: C-axis: 2-axis milling head Spindle speed: max. 14,000 rpm Additional equipment - Double-sided enclosure Machine condition Fully functional, in very good condition. Machine remains powered and is available immediately.

Condition: used, machine/vehicle number: 1 284 066, Feed diameter: 200 mm Through-hole: 50 mm Mounting, short taper according to DIN 55027: Size 6 Outer diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to the front of the chuck, without jaws): 150 mm Nwjdecm Tgkjpfx Ag Tjh pneumatically actuated

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam Nedpfx Agsi Enxde Tswh The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Year of construction: 2013, condition: used, overall weight: 15,500 kg, total length: 4,000 mm, total width: 2,250 mm, total height: 2,810 mm, spindle motor power: 29,000 W, ALZMETALL GS 1000/5-T CNC 5-axis machining center stable gantry design equipped with NC rotary tilting table and torque motors for backlash-free and highly dynamic direct drives in A and C axis simultaneous 5-axis machining possible equipped with 3D interpolation look-ahead TCPM and free contour programming water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and air blow through spindle high-pressure coolant system extensive coolant equipment with band filter high-pressure pump and chip conveyor oil mist extraction system (LTA) integrated measuring systems with 3D probe (M&H) and laser tool measurement (Blum) collision monitoring (DCM) pick-up tool changer system automatic central lubrication LED working area lighting full enclosure Weight approx.: 15,500 kg Travel Z-axis: 600 - mm 5-axis machining: Yes Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Nodoy Th U Njpfx Ag Towh Spindle performance: 29 kW Movement A-axis: 0 - 140 ° Spindle speed: 12000 - rpm NC rotary table: Yes Travel Y-axis: 800 - mm Number of tool locations: 33 Control: Heidenhain iTNC 530 Movement C-axis: 360 - ° Dimensions of the clamping surface: 800 x 630 mm Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), manually operated, water-cooled spot welding pliers DALEX, type A 3119 with double-stroke mechanism and short-stroke latch Short stroke: 25 mm - Long stroke: 57 mm with electrode force switch and secondary transformer for current control Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 9.5 kA Nsdpfx Agog Ew H No Tewh Electrode force: 180 daN Arm spacing: 120 mm Arm extension: 250 mm with synchronous welding control RS 11-2 Main switch, connection cable, and 16 A CEE plug Extensive range of water-cooled electrode arms in stock.