Electric 4-wheel forklift

Linde E70-01

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Bedpfxovvizkj Am Tjwr Storage location: Garbsen

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: Bodpfx Aoi Enxdom Towr - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Year of construction: 2013, condition: used, Features: * Used telescopic belt conveyor * Condition: fully functional, with signs of wear * Ideal for fast material transport * Professionally disassembled and packed * Incl. feet * Incl. control cabinet * 3 units in stock * Price per unit Technical data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800-4x16 Belt direction: loading and unloading Color: anthracite gray Overall length, retracted: 5,550 mm Overall length, extended: 16,000 mm Overall width: 1,500 mm (incl. control cabinet) Width: 1,220 mm Belt width: 800 mm Condition: good (used) Belt type: smooth / black Conveying height: 1,100 mm Weight: 3,300 kg Two speed levels can be set. Bjdjiuqcwepfx Am Towr Telescopic belt conveyor The telescopic belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the telescopic belt conveyor can transport sensitive and differently sized containers, boxes, or other packaging and article units to the delivery or collection point and can also be used as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the company and warehouse and is used for conveying significant quantities of goods over long distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWi 20.20 Bjdpfofr T Eqox Am Tjwr Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is installed in the wall Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust pipe: 400 Ø mm Depth: 900 mm Double filtration: Paper filter + Paint stop filter mat Clamping bar (+ EUR 150.00 net) Options/additional cost for: Transition from square to round: EUR 150.00 net Paint stop filter mat with clamping bar: EUR 150.00 net Side guide plates with hinge: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with a supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to have a three-minute phone call than to exchange emails for three days. TSWi 30.20 Dry spray booth Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Bwodpefr T Emofx Am Tor Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust pipe: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping strip (+180 EUR net) Options/surcharge for: Transition from square to round: 150 EUR net Paint stop filter mat with clamping strip: 180 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch Bwedpfx Amofnvwqe Ter - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 347 h, construction height: 2,230 mm, empty load weight: 850 kg, total length: 2,410 mm, construction width: 1,160 mm, Tow tractor Technical condition: good Bsdoyfy I Dopfx Am Tjwr

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Bwjdpfx Amew Rpxce Tor Emergency push-button Discharge hopper

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 730 kg, table length: 1,600 mm, table width: 1,600 mm, Equipment: CE marking, documentation/manual, This is a medium-sized CNC router designed for cutting, engraving, and 3D milling. It can work with plywood, wood, MDF, chipboard, plexiglass, plastic, soft metal, and aluminum. Equipment for effective work operates at all hours of the day and night. The Wattsan M1 1616 has a 4.5 kW spindle as standard. The machine has a working table of 1600x1600x200 mm. Its gantry has increased rigidity and allows the use of 1 to 12 spindles. Heavy workpieces can be operated thanks to that as well. You can give our managers a call for additional details! Wattsan M1 1616 characteristics Working area: 1600x1600 mm Spindle: 4.5 kW Machine size: 2300x2140x1780 mm Weight: 590 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Bwederywhujpfx Am Tjr Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. Bodpoin Eztjfx Am Tjwr DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table