Diesel Forklift

Linde H25D-02

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 16,196 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,511 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Kjdpjx N Aaxefx Addell Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good 3rd valve, 4th valve, heater, full cab,

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? Kedpfx Adsvgrh Uedell We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,830 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,511 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, drive type: Diesel, Diesel forklift truck ISO class: ISO class 2 = 1,000 - 2,500 kg Kodpfx Adjx N Aarsdjll Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good 3rd valve, 4th valve, heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 10,076 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,511 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Ksdpfx Asx N Aaleddoll Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Sideshift, 3rd valve, 4th valve, heater, full cabin,

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,725 h, load capacity: 2,800 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, gearing type: hydrostat, fork length: 1,200 mm, tire condition: 90 %, fuel: diesel, Equipment: additional headlights, lighting, sideshift, immediate use forklift. mast standard: lifting height 3750mm lifting height: 2600mm equipped with: fork positioner and sideshift. Kedett N Hcspfx Addoll full cab incl. air conditioning. working lights. only 6725 hours

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 10,842 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,511 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Sideshift, 3rd valve, 4th valve, heating, full cabin, Klodpfx Adjx N Aafedjl

Condition: used, functionality: fully functional, machine/vehicle number: H2X392X0055.., Year of construction: 2020, operating hours: 1,652 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift truck Chassis number: H2X392X0055.. Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Kledsx I Taaepfx Addol Condition: Ready for operation and fully functional Technical condition: Good Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, STVZO, full cabin,

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Klsdpfsxrta Esx Addel Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, machine/vehicle number: H2X392J02496, Year of construction: 2018, operating hours: 1,856 h, load capacity: 2,500 kg, lifting height: 5,515 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X392J02496 Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Kjdpfx Ajx Ixq Rsddoll Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab.

Year of construction: 2018, operating hours: 6,481 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 3,750 mm, free lift: 150 mm, mast type: simplex, construction height: 2,700 mm, drive type: Diesel, load capacity: 2,500 kg, Diesel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Kjdpfxovla I Hs Addsll Mast type: Standard Technical condition: good Front tires Type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Description: The vehicle is UVV - checked. Before delivery, the machine is serviced and cleaned. The machine can be repainted on request. Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC120s (90kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Ksdpfxexcir Eo Addjll After refurbishment, this baler is sold with a 2-year warranty.

Year of construction: 2017, operating hours: 7,327 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 4,550 mm, free lift: 150 mm, mast type: simplex, construction height: 2,900 mm, drive type: Diesel, load capacity: 2,500 kg, Diesel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: good Front tires Type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Kljdpfxevla Nks Addsl Description: The vehicle is UVV - checked. Before delivery, the machine is serviced and cleaned. The machine can be repainted on request. Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 19,457 h, load capacity: 2,500 kg, lifting height: 4,550 mm, fuel type: diesel, mast type: simplex, construction height: 2,927 mm, drive type: Diesel, Diesel forklift Kedpsx Inw Hjfx Addoll ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good 3rd valve, 4th valve, heating, full cabin, air conditioning,

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) Kjdpfx Adsxvh Ewedjll 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: used, functionality: limited functionality, Year of construction: 2019, operating hours: 22,942 h, load capacity: 2,500 kg, lifting height: 4,805 mm, free lift: 1,474 mm, fuel type: diesel, mast type: triplex, construction height: 2,241 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Limited operational capability Technical condition: poor Description: Damaged engine Ksdpox Inv Ajfx Addoll Sideshifter, fork positioner, 3rd valve, 4th valve,