Linde H60D-02

Linde H60D-02

Condition: used, functionality: not functional, Year of construction: 2013, operating hours: 12,000 h, load capacity: 6,000 kg, lifting height: 3,550 mm, fuel type: diesel, mast type: simplex, construction height: 2,720 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Not operational Godpfx Aajzvtq Seyokb Technical condition: Used for spare parts Description: Cylinder head defect Full cab

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Gsdpfx Aaet Hal Deyekb Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 25,139 h, load capacity: 6,000 kg, lifting height: 4,150 mm, fuel type: diesel, mast type: simplex, construction height: 3,030 mm, drive type: Diesel, Diesel forklift Gkedpfx Asy Uf D Rjayob ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Description: Half cabin 3rd valve, 4th valve, heater

Condition: used, Year of construction: 2014, operating hours: 4,450 h, load capacity: 6,000 kg, lifting height: 3,850 mm, fuel type: diesel, construction height: 2,880 mm, gearing type: automatic, Equipment: cabin, head guard, Due to countless phishing and spam emails, email inquiries can only be processed if you PROVIDE YOUR VALID PHONE NUMBER! Unfortunately, we CANNOT process email inquiries WITHOUT a phone number! We ask for your understanding. For telephone inquiries and WhatsApp, please ... Very good technical condition: * Linde H60D-02-396 * Kilomatic TC2000-MVI scale with printer Gsdpfey Nhc Ejx Aayekb * 3rd and 4th valve * Full cabin * Heating * Deutz engine * Mast type: Standard * Hydrostatic transmission, double pedal * Fork length: 2,400 mm * Tyres: Superelastic 355/65-15 + 8.25-15 Subject to errors and prior sale.

Condition: used, fuel type: electric, Year of construction: 2017, Equipment: hydraulics, tail-lift, We are offering this used Bringo Electric Vehicles DT1 electric pickup truck, manufactured in 2017. Godpfx Aoztu Rzeayjkb Manufacturer: Bringo Electric Vehicles Model: DT1 Year of manufacture: 2017 Condition: used Category ID: 1820 Type ID: 2950 Type: Electric pickup truck with a hydraulic tailgate If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, mileage: 294,000 km, power: 74 kW (100.61 HP), first registration: 12/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 9, Year of construction: 2012, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, seat heater, sliding door, Ford Transit, school bus, 9 seats, extra high roof, long wheelbase, air conditioning, ABS, sliding door on the right, rear portal doors, ready to drive, available for immediate pickup. Gkedpjyrybdofx Aayob

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Gkodpfxjvy Aips Aayjb Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm Gsdpoylyh Djfx Aayokb - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric Gsdpeywzlpjfx Aayjkb -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Year of construction: 2025, condition: new, functionality: fully functional, DYNAMIC WASHER Model ERFOR® DR8 Component machine for recycling washing lines ♻️ ♻️ ♻️ Godjuqlmzjpfx Aayskb Dynamic washers are machines designed for cleaning moderately contaminated and fragmented plastic waste, such as: PP packaging, PVC, PET bottles, shredded big bag materials like LLDPE, LDPE, HDPE, PP, PVC, PS, household chemical waste, and many others. The washers offered by Koltex PRS are easy to operate and reliable machines, which can be configured into a highly efficient dynamic cascade washing system (tandem – 2 x 30 kW, 2 x 55 kW, or 2 x 75 kW). Multi-point water dosing to the screen washers (cleaning system) and active contamination extraction ensure more effective operation, while dynamic feed movement is enabled by rotating impeller blades. The extended screen section (1400 mm) significantly enhances washing quality, and drainage of excess water is ensured by an acid-resistant steel screen. The use of two screen segments improves the ease of maintenance. Model – DR8 Motor power [kW] – 30 / 55 / 75 kW Film drying capacity [kg/h] – 1000 / 1500 / 2000 kg/h Milling drying capacity [kg/h] – 4500 Our portfolio also includes: - Complete plastic recycling systems - DWFS® washing lines - Granulation and extrusion lines For more information, please visit our website.