Dust extraction with cleaning cabin

LWK INNOFIL EBS-P 1.16_EX

Condition: used, Combined blower oven with two floors and a fermentation chamber Dimensions: 90x150x210cm Electric power: 15kW Capacity: 4 trays x 60x40cm Iasdpfeutau Sjx Apnjt

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm Iaedpfoffamvox Apnjt ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg. Iaodpexw N Uvefx Apnot

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Isdpoddv Itofx Apnjat Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: excellent (used), Year of construction: 1988, manufacturer: LÖDIGE year of construction: 1988 Isdpfjrywvdsx Apneat type: FKM 4200 D e-engine: 75 kW Siemens

Condition: excellent (used), Year of construction: 2016, operating hours: 6,700 h, Kaeser SM 12 (2016) – Screw Compressor in Excellent Condition For sale: Kaeser SM 12 screw compressor from 2016 in excellent, well-maintained condition. Reliable, quiet, and energy-efficient compressor – ideal for workshops, print shops, or manufacturing facilities. Technical specifications: Manufacturer: Kaeser Kompressoren Model: SM 12 Year of manufacture: 2016 Motor power: 7.5 kW Free air delivery: approx. 1.1 – 1.3 m³/min (depending on pressure level) Operating pressure: 8 / 10 bar Voltage: 400 V / 50 Hz Integrated Kaeser Sigma Control Basic Low-noise operation, compact design Iedoxprwkspfx Apneat

Condition: used, Used Lödige model FKM1200D stainless steel ploughshare mixer. Manufacturer: Lödige Model: FKM1200D/2MZ/2ZF Material: Stainless steel Capacity: 360-840 litre working capacity, 1200 litre total capacity (product dependent) Iasdox R S Ubopfx Apnet Mixing Chamber: 1700 mm long x 950 mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 25/36 kW, 730/1465 rpm, 380 V electrical motor with gearbox Also Includes: - 2 stainless steel side wntry choppers direct driven by 7.5 kW, 2930 rpm, 380 V motors. - Control panel - controls mixing time, start/stop mixing blades, start/stop choppers, open/close inlet valve, open/close outlet valve.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): 15" (380 mm) • Bar capacity: 60 mm Iodpsyrr Rwofx Apnsat • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: CryoMax Eco 17Y110-01, New (demo machine) purchased and used once at a customer site for a short demonstration! Iodpfx Apsx Dkagsnjat

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm engine output 5,5 kW 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Iaodpfxju Sbkao Apnet