Special purpose truck

BENNA NUOVA CON ROTORE

Condition: used, Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, Digital screen printing machine with hot foiling unit. Year of installation: 2019. Minimum print format: 29x42 cm, maximum: 75x120 cm. In excellent condition. Bwjdpexrz T Tofx Afkjn

Condition: new, Year of construction: 2025, Model: C3T Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. Bjdpfx Afeg D Nz Rekjwn

Condition: reconditioned (used), Rabolini model Imperia D, with sheet feeder/remover, 80/120 cm format, self-centering frame, pneumatic clutch, automatic lubrication, copy counter, side register, 3 operating modes, original RABOLINI sheet feeder/remover, refurbished machine. Bwodpfx Afoyfv Akoksn

Condition: used, functionality: fully functional, Wohlenberg 44 FS 50 automatic three-knife trimmer. Complete with accessories. Bwsdpjxdm Dbsfx Afken

Condition: ready for operation (used), Year of construction: 2005, spindle bore: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE Bedew Rcamopfx Afkown - Maximum bar diameter: 16 mm - Z-axis travel: 80 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° TOOL TURRET 1 - Number of stations: 10 - Number of live stations: 4 - Driven tool speed: 6,000 rpm FRONT TOOLING - Number of positions: 4 SUBOPERATION TOOLING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2,050 kg ACCESSORIES - Control unit: Fanuc 31i - Guide bushing - Parts removal - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Bjdpfexxlmwsx Afkswn Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2003, operating hours: 10,000 h, Used Robot Depalletizer Fanuc 2003 – The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations? Look no further than the 2003 Fanuc Robot Depalletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and an available base, this depalletizer is designed specifically for depalletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can depalletize products up to a height of almost 2.7 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) save floor space and simplifies transportation and installation. Upgrade your depalletizing operations with the 2003 Fanuc Robot Depalletizer – the ultimate solution for efficient and effective depalletizing. With a gripper head for depalletizing one layer of bottles at a time (inflatable) Botte holding system: Bwedpfjvgvx Dex Afksn This Fanuc robot depalletizer has a particular bottle gripper: Use the neck bottle gripping system using inflatable bars. This system helps to process shaped bottles and therefore allows them to be deposited on the loading table with irregular bottles. The classic push system has this limitation, it cannot process bottles other than round ones. But the Fanuc robot depalletizer has a speed of 200 layers per hour to a maximum of 12,000 BPH. Another important feature is the space required to work with that equipment, compared to traditional systems at least 50% of the usable surface is saved; for the same performance, a robot is always preferable, also because being able to change the bottle gripper, all types of bottles can be processed with very high peak loads.  

Year of construction: 2010, condition: used, Imperia D (85 x 105 cm), year of manufacture 2010, CE 2010 Bwedpfx Ajxa Epnofkon Machine reinforced at connecting rods Micrometric pressure adjustment Weight: 6,000 kg Mechanical speed: 1,200 sheets/hour Machine inspected by manufacturer, safety devices optimized With hardened cutting plate Self-centering universal frame Operator arm with control panel Refurbished pneumatic brake-clutch system Delivery time: 60 days Price: on request Warranty: 3 months

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, controller manufacturer: FANUC, controller model: 0i-MC, spindle speed (min.): 8,000 rpm, BRAND: AWEA MODEL: BM-1020 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2011 CNC CONTROL: FANUC Series 0i-MD MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Width: 3,603 mm; Depth: 2,780 mm; Height: 2,930 mm Spindle Taper size: ISO-40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 7.5/11 kW Working Capacity X-axis travel: 1,020 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Distance spindle center to column: 640 mm Distance nose of spindle to table surface: 125 – 725 mm Table Table size: 1,120 x 600 mm Table load capacity: 1,000 kg Feeds Rapid traverse (X / Y / Z axes): 24,000 mm/min Feed rate (X / Y / Z axes): 10,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Tool shank: DIN 69872 – A40 Tool magazine capacity: 24 stations Max. tool diameter (adjacent pockets full/empty): ⌀90 / ⌀150 mm Max. tool length: 250 mm Bjdpfxoxxmcyo Afkjwn Max. tool weight: 8 kg Accessories & Other Equipment Chip conveyor Coolant tank with wash pumps High pressure pump (15 bar) with external tank Spindle line air conditioner Manuals, Electrical Schematics, and CE Declaration THE FOLLOWING MAINTENANCE HAS BEEN PERFORMED ON THE MACHINE: * X and Y axis ballscrews serviced and bearings replaced. * Turcite on X/Y/Z axes re-scraped and renewed as required for machine realignment. * Complete check of the pneumatic and axis lubrication systems. * New rotary union for through-spindle coolant and tool unclamping press installed. * Oil changed on the ATC (Automatic Tool Changer). * X/Y/Z axis covers serviced with new seals and wipers.

Condition: good (used), Die-cutting machine for cardboard, useful width 2500 mm. Can feed three different sizes of cardboard into the machine. Bedpoyf D N Sofx Afkswn