Metal rack - industrial shelf

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: YS-2674, turning height: 1,250 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Faceplate diameter: 1,250 mm Max. torque on faceplate: 12,500 Nm Turning height: 1,250 mm Max. turning diameter: 1,600 mm Max. workpiece weight: 5,000 kg Table speed: 2 - 300 rpm Travel range X-axis: 1,475 mm Travel range Z-axis: 900 mm Kedpfx Agjzb Uy Tj Uodn Rapid traverse: 10 m/min Spindle taper: ISO BT50 Number of tool positions: 12 MACHINE DETAILS Control system: Fanuc 0i-TD Total power: 75 kW Dimensions & Weight Footprint: approx. 4.7 x 5.8 x 5.5 m Machine weight: approx. 32 t EQUIPMENT Tool changer magazine for 12 turning tools with BT 50 shank Note: The €5,000 for dismantling and loading applies to the preparation for EU transport. Preparation for sea transport is possible; costs upon request.

Condition: new, New equipment MASS International Kdodpfx Asd Tidxsg Ujn NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm Kjdpjzb A Dtjfx Ag Uodn MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Weight approx.: 20 kg EQUIPMENT Laptop and software (completeness not guaranteed) Transport case Note: The red base frame on which the laptop is placed is not included in the offer.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 70352, total width: 1,200 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 100 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring volume: 3,000 mm Accuracy: 0.045 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,200 mm x 1,200 mm x 1,800 mm Weight: 100 kg Kjdpfxozb A Avo Ag Uodn EQUIPMENT Laptop and software (completeness not guaranteed) Base frame Transport case

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: 1606-I0019, Oil cooler for DMG SL-150 MC machine Weight: 68 KG Dimensions L x W x H: approx. 1040 x 320 x 400 mm Max. 5 operating hours Manufacturer according to label: Kouwakougyo Co. LTD. Kdsdpfxjiby Sko Ag Usn

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 10019824, cutting speed: 110,000 mm/min, cutting range round steel at 90°: 320 mm, overall weight: 1,600 kg, saw band length: 5,300 mm, TECHNICAL DETAILS Cutting capacity for round steel at 90°: 320 mm Cutting capacity for flat steel at 90°: 520 x 320 mm Smallest dimension for cutting (round): 10 mm Smallest dimension for cutting (flat): 10 x 8 mm Cutting speed: 15 - 110 m/min Saw blade dimensions: 5,300 x 34 x 1.1 mm Shortest remaining material length: 40 mm MACHINE DETAILS Drive power: 2.6 kW Total drive power: 3.7 kW Kjdpfx Agezdi U Nj Uodn Dimensions & Weight Installation dimensions (L x W x H): 3,100 x 1,100 x 2,200 mm Weight: 1,600 kg EQUIPMENT Available manuals Numerous saw blades

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Kodpszcda Sofx Ag Uodn Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet 2000mm flat Kedpegggklofx Ag Ujdn Dimensions: approx. 2000 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Kjdpfx Aszb Uz Dog Usdn Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Kedpfezb Du Hjx Ag Ujdn Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Kdodponwmwvefx Ag Usn Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 13230, wheel width: 25 mm, wheel diameter: 130 mm, controller model: Siemens 840D, spindle diameter: 85 mm, stroke rate (max.): 2,500 1/min, TECHNICAL DETAILS Wheel diameter max.: 130 mm Wheel width: 25 mm Module max.: 3 Module min.: 0.5 Spindle bore diameter: 85 mm Stroke rate: 500 - 2,500 strokes/min (continuously variable) Stroke: 30 mm MACHINE DETAILS Control model: Siemens 840D Total power requirement: 48 kVA Dimensions & Weight Footprint (L x W x H): 4,700 x 3,000 x 3,300 m Machine weight approx.: 11.5 t EQUIPMENT Tailstock with point Chip conveyor Kjdpfjzb Dtcjx Ag Ujdn Hydraulically actuated tailstock arm and linear guides

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: 12156, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,490 mm, spindle speed (max.): 1,250 rpm, workpiece weight (max.): 6,300 kg, TECHNICAL DETAILS Spindle diameter: 110 mm Drilling spindle speed range: 6.3 - 1,250 rpm (in 4 steps) Facing head speed range: 6.3 - 315 rpm (in 2 steps) Travel in X-axis: 1,985 mm Travel in Y-axis: 1,270 mm Travel in Z-axis: 1,260 mm (with tailstock 1,490 mm) Travel in W-axis (spindle longitudinal): 710 mm Travel in U-axis (facing slide radial): 250 mm Table size: 1,600 x 1,400 mm Table load capacity: 6.3 t Table rotation range: 360° Tool holder: ISO 50 Feed rate steps for table and spindle head vertical: 5 - 2,500 mm/min Turning diameter for drilling max.: 630 mm Turning diameter for facing max.: 1,250 mm MACHINE DETAILS Control system: NC Control for program: Heidenhain 320 Total power requirement: approx. 90 kW Machine weight: approx. 30 t Kdsdpfozb Dqbex Ag Usn EQUIPMENT Tailstock Facing slide 700 Electronic handwheel Note: Currently, the machine has an electrical fault and requires repair!

Condition: used, Four wins - The building blocks of success from DLK - Warehouse Technology | Levelmaker® | Logistics | Solutions Kdodpfx Agjm Rg Aue Usn WE OFFER Polypal pallet rack traverse Traverse clear width: 2.430mm minimum order quantity: 10 The indicated price is a unit price and is valid per traverse It is a used item. PROJECT Our sales team will be happy to provide you with a non-binding offer tailored to your needs. TRANSPORT & ASSEMBLY We will gladly help you with transport and assembly of the goods. TERMS OF PAYMENT Terms of payment are to be agreed in case of order. The price is understood as unit price/net price or as stated in the description text (plus VAT). Of course you will receive an invoice with VAT. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, materials handling, warehouse platforms, textile storage as well as machines for trade, industry and craft. We constantly offer you interesting used products from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Kjdpfx Aezcwupog Ujdn Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.