Three-sided tipper truck

MAN TGM 18.320 4X4 BB Krankipper Palfinger PK 12.501

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Iasdpfjki Einox Aa Ior

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iasdoh Ek Daepfx Aa Ier The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Iaedpfx Aaovkhcco Isr Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 04/2016, next inspection (TÜV): 02/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2015, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, 2nd owner since 2018. German minibus. Only original 206,000 km. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 were invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially new - Rear tyres NEW (all-season tyres) - Front tyres as-new (all-season tyres, DOT 17/2024) Last service in November 2024. Auxiliary heater (functions well). Air conditioning. 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Unladen weight: "2025-2293 kg" as per vehicle registration certificate. Gross vehicle weight rating: 3,000 kg. Standard registration as "vehicle for passenger transport up to 8 seats / multi-purpose vehicle". Original COC (Certificate of Conformity) document available. Euro 6 emissions standard. 6-speed manual gearbox. The Citroen drives powerfully and very well. This offer is valid only for businesses, freelancers, farmers, forestry operations, and comparable legal entities. Sale to purely private individuals is strictly excluded. Subject to prior sale and errors at any time. Isdpfx Aev I Idbja Ioar Net price: €10,500. For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receipt of the final export confirmation (the export document or confirmation of arrival).

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Iedpfx Aemkixwoa Ioar Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Ijdpfeulixqex Aa Isar Year: 2007 Description: - L-sealer Shrink tunnel

Condition: excellent (used), working width 230mm Isdpfxspkwaxj Aa Ioar working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Year of construction: 2022, condition: new, Press hydraulic 6 six meters automat for fingerjointing line lignum Press hydraulic 6 six meters automat for fingerjointing line lignum Second hand 2022 Make: Press hydraulic 6 six meters automat for fingerjointing line lignum Model: Press hydraulic 6 six meters automat for fingerjointing line lignum Description: press hydraulic 6 six meters automat for fingerjointing line lignum .iNPUT TRANSPORT band output automat proces .More infomation plese send for mail Year: 2022 Ijdsimwx Espfx Aa Ioar

Condition: excellent (used), functionality: fully functional, mileage: 288,578 km, power: 205 kW (278.72 HP), first registration: 11/2000, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 8,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: automatic, number of gears: 6, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 3,850 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2000, Equipment: tail-lift, trailer coupling, Mercedes-Benz Atego 1828/3 Tipper with Meiller Body / Atlas AK 85.1-A2 Crane • Manufacturer: Mercedes-Benz • Model: Atego 1828 • Mileage: 288,578 km • First registration: 11/2000 • Power: 205 kW / 272 HP Iaedpsyvi Tlefx Aa Ior • Drive configuration: 4x2 • Transmission: Manual, 6-speed • Engine brake • Suspension: Leaf spring – leaf spring • Atlas crane: AK 85.1-A2 • Lifting capacity: 1.9m = 4200 kg; 3.9m = 2250 kg; 5.6m = 1520 kg; 7.3m = 1140 kg; 8.9m = 870 kg; 10.6m = 700 kg • Hydraulic outriggers • Body: Meiller tipper – three-way tipper • Body length: 3.85 m • Body width: 2.40 m • Side wall height: 0.60 m • Wheelbase: 4 m • Trailer hitch • Radio • ABS • Curb weight: 9,500 kg • Payload: 8,500 kg • Gross vehicle weight: 18,000 kg • Euro: 2 • German vehicle • German registration documents • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our General Terms and Conditions.

Condition: used, mileage: 443,865 km, power: 205 kW (278.72 HP), first registration: 11/2006, fuel type: diesel, empty load weight: 9,710 kg, maximum load weight: 8,290 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 2, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, crane, cruise control, differential lock, immobilizer system, low noise, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Kz. House, 1x comfort seat, rear window, electric mirror, electric window left, electric window right, radio, cruise control, switch 8, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, front exhaust, differential lock, work lights, storage box, air suspension, low-noise G1, lashing eyes, U-protection, swivel drop sides, roof hatch, crane behind house, emergency stop, foldable, 2-point hydraulic outrigger, 2x hydr. extensions, yellow environmental sticker Wheelbase: 5700 mm Body: platform body with crane Palfinger PK9501-A, radio control 7.5t front axle, rear axle H6 13t disc wheel 440, disc brakes on front and rear axle, Telligent brake system with ABS and ASR, front underride guard, parameterizable special module (PSM), long-distance cockpit, pollen filter, Telligent maintenance system, tank capacity: 210l, auxiliary drive countershaft MB 131-2. Load diagram: 3.6m-2400kg, 5.5m-1560kg, 7.4m-1140kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iasdovhhxljpfx Aa Ijr - .