All-terrain forklift

Manitou M 30-4

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,766 h, load capacity: 3,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 70 kW (95.17 HP), empty load weight: 6,226 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,100 mm, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Fodpeztt Tnofx Anlepk Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 0 - 20% Description: Front forklift - all-terrain forklift MANITOU M30-4T - - - 3-ton lifting capacity - - - side shifter - - - TRIXPLEX free-lift mast - - - overall height 3.04m - - - lifting height 5.50m - - - year of manufacture 2011 - - - 7766 operating hours according to meter - - - 4-cylinder PERKINS TURBO diesel engine, 95 hp - - - pneumatic front tires approximately 90%, rear 10% - - - large front tires - - - good off-road capability - - - 4-speed torque converter transmission - - - work lights front and rear - - - full cab with heating - - - mechanical hydraulic system - - - all-wheel drive can be engaged - - - length without forks 3.80m - - width 2.10m - - overall height 3.04m - - good condition Side shifter, 3rd valve, work light rear, work light front, heater, full cab.

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm Fsdpfsgryl Ajx Anlspk strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,800 mm, · Bedienertyp Sitzen Fedjztgmbopfx Anlopk · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: used, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 5,510 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Fpodpeztggnsfx Anlsk Drive Diesel Year built 2022 Lifting height (mm) 5,510 Lifting weight (kg) 3,000

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Fpedswa Ax Aepfx Anljk

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,535 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Fpedpfxsztgahs Anljk Drive Diesel Year built 2025 Lifting height (mm) 5,535 Lifting weight (kg) 3,000

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,550 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Fjdoztgabepfx Anlepk Drive Diesel Year built 2025 Lifting height (mm) 5,550 Lifting weight (kg) 3,000

Condition: used, machine/vehicle number: 15355, Year of construction: 2008, operating hours: 15,561 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 15355 Device details: Year of manufacture: 2008 Load capacity: 12,000 kg Lifting height: 5,500 mm Read operating hours: 15,561 h Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve Fpedpfjtw Dfwex Anlek * Full cabin * Heating * Front work lights * Rear work lights ---- Further device information: Without fork carrier Rotating beacon Radio Single pedal ---- Operating hours are generally displayed hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information provided without guarantee, errors and changes reserved.

Condition: used, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 5,510 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Fpjdpfsztf Sisx Anlsk Drive Diesel Year built 2022 Lifting height (mm) 5,510 Lifting weight (kg) 3,000

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,380 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough-terrain forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Fedpfew Uamxjx Anlopk Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tires type: pneumatic Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires condition: 80 - 100% Side shift, 3rd valve,

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. Fpjdjymcmfopfx Anlok · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,100 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough terrain forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: good Fodpfeym Enrsx Anlspk Front tire type: Pneumatic Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 2024, operating hours: 795 h, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, power: 54 kW (73.42 HP), motor manufacturer: Deutz, total height: 3,050 mm, total length: 3,500 mm, total width: 2,100 mm, color: other, Equipment: all wheel drive, General information Year of manufacture: May 2024 Registration number: T-67-GGD Technical information Number of cylinders: 4 Engine capacity: 2.925 cc Engine type: Deutz TCD 2.9 Empty weight: 6.230 kg Wheelbase: 200 cm Functional Lifting capacity: 3.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - LED-lighting - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Fsdpfxsy Ityyj Anlopk Country of production: France Condition Overhauled: × CE type: CE

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 952 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 1,425 mm, fuel type: diesel, mast type: triplex, construction height: 2,900 mm, power: 55 kW (74.78 HP), fork carriage width: 1,900 mm, fork length: 1,200 mm, empty load weight: 9,165 kg, total length: 3,700 mm, drive type: Diesel, construction width: 2,095 mm, Rough-terrain forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm ISO class: Pin-type Mast type: Triplex Fpodpfxov Itmhe Anlek Transmission: Hydrodynamic Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 445/65-22.5 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 12.5/80-18 Rear tires condition: 80 - 100% Description: Full cab with heating and air conditioning, front and rear work lights, 3rd and 4th valves to fork carriage, hand lever, sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, soot filter, full cab, air conditioning, full free lift, Interior mirror, rotating beacon, windscreen wiper, seat,

Condition: used, functionality: fully functional, machine/vehicle number: Serie 3-E2, Year of construction: 2008, operating hours: 5,200 h, load capacity: 3,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, power: 61 kW (82.94 HP), fork length: 1,200 mm, empty load weight: 6,600 kg, total length: 3,635 mm, drive type: Diesel, construction width: 2,105 mm, All-terrain forklift Chassis number: Series 3-E2 Load center: 500 Mast type: Standard Speed class: 20 Condition: Ready for use and fully functional Technical condition: Good Front tires Type: Pneumatic Fsdpfxjzi Huko Anljpk Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Condition: 60 - 80% Sideshift, 3rd valve,