Rough terrain forklift truck

Manitou M30-4 D

Condition: new, functionality: fully functional, machine/vehicle number: M30-4, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,833 mm, fuel type: diesel, mast type: triplex, construction height: 2,689 mm, fork length: 1,200 mm, empty load weight: 6,000 kg, total length: 4,701 mm, drive type: Diesel, construction width: 1,927 mm, All-terrain forklift Chassis number: M30-4 Ibjdpfxey R Hmxo Abpsa Fork width: 125 mm Fork thickness: 40 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires condition: New Rear tires type: Pneumatic Rear tires condition: New Description: 12-month factory warranty / Maximum 2,000 operating hours 3rd valve, 4th valve, rear work lights, front work lights, fully enclosed cab, full free lift, CE certificate, exterior mirrors, rotating beacon, wiper, LED, seat, - Mast tilt 15° / 12° forward-back - Mast tilt holding valve - Fork carriage with guide rollers, width 1,470 mm FEM 4 - Hydraulic line for distributor - Hydraulic kit function for triplex mast with free lift FLT 50 - Hydraulic kit function for triplex mast with free lift FLT 50 - Hard connection for 3rd and 4th hydraulic circuit - Front tires: Alliance A323 405/70-20, off-road tread - Rear tires: Alliance A317 10.5-18 10PR, off-road tread - Full cab - Differential lock - Mechanically suspended plastic seat - LED front work lights (2x) - LED rear work lights (2x) - Orange LED rotating beacon - Reinforced battery capacity 12V 180Ah 900A - Reversing warning signal in counterweight - CE machine homologation - Easy Link Standard Module

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Yunnei EUR5, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift CE EUR5 Diesel engine EUR5 Yunnei DEF30CZEF5 74 kW 100 km 5T lifting capacity forklift weight 7200kg triplex mast 5m lifting height pneumatic tires air-conditioned cabin 1220mm fork length additional bucket included Ijdpjuzivvjfx Abpsba additional 2000mm forks the fork is NEW CE certyficate PayPal payment available

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 3,000 kg, lifting height: 5,500 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,959 mm, power: 55 kW (74.78 HP), motor manufacturer: Deutz, fork carriage width: 1,470 mm, fork length: 1,200 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 405/70-20, rear tire type: pneumatic tires (air-filled), rear tire size: 10.5-18, overall weight: 6,230 kg, total height: 2,959 mm, total length: 4,701 mm, total width: 1,927 mm, color: red, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, === KEY SPECIFICATIONS === Year: 2025 Working hours: 1 h Max. lifting capacity: 3000 kg Max. lifting height: 5.50 m Mast type: Triplex Fork length: 1200 mm Side shift: Yes Drive: Diesel Transmission: Torque converter Cabin: Closed Heated cabin: N/A Tyres: Rough terrain tyres Stabilizers: No Ibjdpjy Duf Njfx Abpja Engine manufacturer: Deutz Emission class: Stage V Weight: 6230 kg CE certification: Yes === HIGHLIGHTS === Triplex 5500 mm mast Side shift Brand new machine 55 kW Deutz Stage V engine Rough terrain configuration Ready for immediate use === CONDITION === Brand new condition Fully inspected and ready for immediate operation === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Brand new rough terrain forklift designed for heavy-duty applications in construction and industrial environments Equipped with a triplex mast and side shift for maximum flexibility and efficiency All machines are fully inspected, CE certified and ready for immediate operation === DELIVERY === Crane loading available on request for smooth transport during shipment Flexible shipping options tailored to your destination and logistics preferences All transport is professionally handled by the logistics team of Collé Rental & Sales

Condition: like new (used), functionality: fully functional, gearing type: automatic, fuel type: electric, color: green, operating hours: 1,000 h, NEW OFFER "BARGAIN" Aggregate crushing and screening plant; the unit includes: - Primary hopper: 70m³ - Secondary hopper: 80m³ - Hazemag vibrating pre-screen feeder, 30 HP motor - Rover pre-screen feeder with 8 HP motor - Guerrero jaw crusher 1000x800 with 100 HP motor - Hazemag impact crusher model APK-30 with 120 HP motor - Alli Charmets vibrating screen, single deck, 3m² effective screening area, 5 HP motor - 15 Tusa-Siem conveyor belts with integrated motors and gearboxes, various lengths and sizes - Electrical distribution cabins: 2.5 x 3m - Control cabin / control panel Ibodpfx Abot N Iwtopoa Transport: the complete plant requires approximately 6–8 trailers SPECIAL DEAL

Condition: good (used), functionality: fully functional, first registration: 07/2015, fuel type: diesel, overall weight: 7,500 kg, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 8,650 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2015, Equipment: ABS, central locking, crane, fog lights, onboard computer, === MAIN SPECIFICATIONS === Year: 2015 Hours: 5510 h Working height: 30 m Max. horizontal outreach: 19.5 m Platform capacity: 350 kg Truck type: MAN Number of axles: 2 Truck drive: 4x2 Transmission: Manual Cabin: Single Engine power: — Fuel type: Diesel Platform dimensions (L x W): 1.6 m working cage Platform rotation: Yes (80° + 80°) Boom type: Telescopic / articulated combination Stabilisers: Yes – hydraulic outriggers CE certification: Yes Total vehicle weight: 7,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available Ibodpfeyr Nkzjx Abpea === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Reliable truck mounted access platform from the well-known manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 meters and a horizontal outreach of up to 19.5 meters, making it ideal for maintenance, installation, construction and infrastructure work. The machine is equipped with hydraulic outriggers, automatic cage levelling and a rotating aluminium working platform, ensuring stable and safe operation in various working environments. All machines are fully inspected, CE-certified and ready for immediate use. === DELIVERY === Crane loading available upon request for smooth transportation. Flexible shipping options tailored to your destination and logistics preferences. All transports handled professionally by the logistics team of Collé Rental & Sales.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Ijdpfx Aet Ac Efsbpoba Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm Ijdpsnyh Sisfx Abpeba STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body. Ibedpfx Abswvgbgopea

Condition: good (used), Year of construction: 2014, Vehicle description Mobile excavator TAKEUCHI TB295W Iedpov D Dqvofx Abpsba Year of manufacture 2014 according to counter 9,709 hours 10,700 KG 77 KW - POWERTILT - hydraulic quick coupler - all lines - slope bucket - 2 buckets - blade - claws - central lubrication - air conditioning - reversing camera and and and... Nice and good original condition with original paint! Sale price: 49,950.00 net Cheap delivery also possible!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Ibedpfxezb Evlo Abpea Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity