Rough terrain forklift truck

Manitou M50.4 D ST5 S1 EU

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 5,270 h, load capacity: 5,000 kg, lifting height: 5,380 mm, free lift: 1,730 mm, fuel type: diesel, mast type: triplex, construction height: 2,890 mm, fork carriage width: 1,680 mm, fork length: 2,390 mm, empty load weight: 8,436 kg, total length: 3,900 mm, drive type: Diesel, construction width: 2,130 mm, All-terrain forklift Fedox Dnydepfx Abuopc Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 480/65-22.5 Rear tire type: Pneumatic Rear tire size: 12.5/80-18 Description: In addition to this Manitou model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this M50-4D ST5 S1 EU. P.S.: Our master forklift workshop specializes in repair, maintenance, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for commission sale at our site. Side shifter, Heater, Full cabin, Full free lift, 4x4 drive

Condition: new, functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: yellow, operation weight: 2,690 kg, lifting height: 2,560 mm, digging bucket width: 1,450 mm, Year of construction: 2025, Equipment: UVV, all wheel drive, cabin, pallet forks, standard shovel, Wacker Neuson Wheel Loader WL25 – Edition Advanced - NEW - ! Wacker Neuson WeCare. Up to 36 months of peace of mind if maintenance intervals are observed! (According to the terms and conditions of Wacker Neuson SE) Equipment: • Perkins engine, 18.4 kW • 2-door cabin, adjustable steering column • 3rd hydraulic circuit comfort function, low-pressure return line • 20 km/h, lighting in compliance with German Road Traffic Licensing Regulations (StVZO) • Lifting height 2,560 mm, rotating beacon • Reverse alarm, hydraulic quick coupler Additional equipment: Ballast & cast iron rear counterweight Self-recovery device Pallet fork 1,200 mm Earth bucket RZ 1450 mm (0.56 m³) Machine location: Warehouse D-46514 Schermbeck – immediately available! Highlights & Benefits: - Compact yard and construction site wheel loader with high tipping load - Maximum versatility thanks to quick coupler & 4-in-1 bucket - Ideal for landscaping, construction companies, municipal operations & agriculture - High driving comfort & excellent all-round visibility - Wacker Neuson quality machine – durable & value-retaining Fields of application: ✔️ Gardening & landscaping ✔️ Building construction & civil engineering ✔️ Agriculture & farm operations Fodpfxox Rn Spe Abuepc ✔️ Municipal use ✔️ Material handling & pallet transport _____ Wacker Neuson WL25 for sale | WL 25 new wheel loader | Wacker Neuson farm loader | Compact wheel loader 18.4 kW | Wheel loader with cabin | Wacker WL25 Edition Advanced | Wheel loader with quick coupler | Wheel loader Perkins engine | Earth bucket | Wheel loader for landscaping | Buy municipal wheel loader

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Tyre size front: 400/70-24 Fpsdpfx Aow Eqddebujc Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light.

Condition: used, Telescopic loader Haulotte HLT 3614 Year of construction 2012 Lifting height 13.60 m Lifting capacity max. 3.6 tonnes Operating hours approx. 3950 hours Dead weight 12,400kg Deutz TCD 2012 L04 2Vm engine with pallet fork Fpedpfx Aovzmq Hsbuoc Tyres very good The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Fjdpfxorq Ebfj Abuepc Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Technical check : OK Fjdpfxerhzy Ho Abuspc Pas de télécommande de la grue

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Fedpew Eqdqjfx Abuepc Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® SD MINI screening drum features a foldable design and is a semi-mobile unit. Equipped with a vibration motor, it is particularly practical for recycling operations, as well as in the construction, agricultural, and gardening sectors where many different materials need to be processed. The innovative mobile trommel screen from ASCO®Screen. The variable height adjustment makes it easy to handle and transport. Screening a variety of materials is effortless, whether you load the machine manually or with the help of an excavator. In both cases, the screened material can be transported via the conveyor belt after the process. The screened material is distributed over and under the entire length of the drum, while oversized material is ejected at the rear of the machine. Efficient processing of various materials in recycling operations. Economical use in construction, agricultural, and gardening operations where space is limited. Flexible use thanks to numerous adjustment options. High performance and capacity for impressive screening performance. Versatile material separation of coarse particles, shavings, compost, soil, bark mulch, pellets, wood chips, gravel, building demolition materials, and plastic. Technical Specifications: Fpodper Nbxysfx Abusc Screen length: 1.49 m Usable screen length: 1.25 m Outer diameter of the screen drum: 0.8 m Usable screening area: 3.15 m² Screening capacity: 5 - 40 t/h Mesh size: Ø4 - Ø100 mm Hopper opening: 1600 x 760 mm Bucket width: 1.5 m Speed (adjustable): 5-20 rpm Drive power: 400 V / 2.2 kW Filling height: 1.5 - 1.86 m Weight: 600 kg Highlights: - Vibration motors for emptying the hopper - Three different drum versions - Drum rotation in both directions - Cleaning brush - Easy drum replacement - Single-wheel drive - Hour meter - Adjustable height / supports with wheels and without wheels

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Fpodjncd Azspfx Abujc Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Fedpfx Abefi Tg Heuopc