Telehandler / Telescope Forklift

Manitou MLT420 H 60K ST5 S1

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,800 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 11,300 kg, total length: 6,270 mm, drive type: Diesel, construction width: 2,420 mm, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Torque converter Bedpfx Abozkwu Dj Djwt Speed class: 20 Condition: Ready for use and fully functional Technical condition: Good Front tyres type: Pneumatic Front tyres size: 24 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 24 Rear tyres condition: 80 - 100% Description: The MT 1440 Easy telehandler was designed for construction sites where high lifting heights are required. With a lifting capacity of 4 t, it allows pallets to be safely placed at heights of up to 14 m. The robust machine features a low sheet-metal-clad door and an electric window to reduce the risk of breakage. The cab offers excellent visibility so the operator can constantly monitor site operations and track the load to its drop-off point. Thanks to numerous lashing points, the MT 1440 can be easily transported from one site to another. Its 42 cm ground clearance, 3 steering modes, and 4-wheel drive ensure adaptability to all types of terrain. 3rd control circuit, heating, full cabin, CE certificate, external mirror, rotating beacon,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Mast type: telescopic Speed class: 20 Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Rear tyres size: 500/80-24 Rear tyres condition: 80–100% Bedpfx Abeyfivko Dowt 3rd valve,

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Bjdpfx Aextmyzsb Dswt Number of wires: 5

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Bwedpfsyu Stksx Ab Djt Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC Bwsdpexvh Dyofx Ab Dot

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 Bwsdpfx Aoztgl Deb Dst ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Bwjdoyuyg Sopfx Ab Djt Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,000 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Mast type: Telescopic Bodpeywpv Nsfx Ab Dewt Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Bsdsygud Aopfx Ab Dowt Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: new, Year of construction: 2025, power: 18 kW (24.47 HP), maximum speed: 20 km/h, Engine manufacturer: Kubota, engine type: diesel. Schäffer loader, model 3630, with ROPS operator protection canopy. Kubota diesel engine D1703M-DI, 18 kW = 25 hp. Rear counterweight plate, hydraulic tool locking system, retention system, hydraulic high-speed gear (20 km/h). Includes operating manual. Special equipment: ballast weight 95 kg, hydraulic connections with quick-release couplings. Preparation for lighting system: complete steering column for lighting, cable harness to the rear for taillights, LED work light set, 800 lumens (2x front and 1x rear). Towing device with pin and lashing eyes. Standard tires: 10.0/75-15.3 AS ET -40. Receiver frame Euro-WS, hydraulic locking. Location: null. Bwedpezp Anajfx Ab Dot