Shelving racks

Mauser SR 409

Condition: good (used), Special price ex site: approx. 300 bays shelving racks, Mauser, heights approx. 2.50m, shelves 1.20m x 0.35m - used - : = Price per bay: only 45.-€ (net) ex site, dismantled, packed and loaded! Price per base field: only €55 (net) ex site, dismantled, packed and loaded! Price for complete acceptance ex site: only €12,500 (net), dismantled, packed and loaded = only €42 (net) / field! Manufacturer: Mauser Type: unknown - should be SR-409 Year of manufacture: unknown Frame height: approx. 2,50m Iedpfx Ajqmngujfastp Shelf dimensions: 1.20m x 0.35m Load capacity per shelf: unknown, but at least 100kg Bay load: unknown 6 shelves per bay! Condition: good Available: from approx. beginning of December 2023 Location: Munich

Condition: used, pressure 3 - 6,5 kg / cm² bar rate of flow 26 l/min diameter of die - min./max. -- mm Ratio 73 : 1 rated current 1,65 KW weight of the machine ca. 100 kg Iedpfx Asgvkliefastp dimensions of the machine ca. 730 x 760 x 1200 mm noise level 78 dB(A)

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: MING, frame width: 1,100 mm, load capacity per stand: 9,000 kg, 1 linear meter of pallet racking, heavy-duty racking, high-bay storage racking Height 2.75 m, depth 1.1 m Load capacity per pair: 3000 kg, bay load 9000 kg Incl. wooden shelves A total of approximately 300 linear meters are available! Please inquire about your desired length. Shelf is empty, disassembled, and packed on a pallet. Very good condition, see pictures. Pickup only by appointment in 75053 Gondelsheim. A forklift is available for loading. Ijdowb Ulwjpfx Afajtp Shipping via freight forwarder is possible; please inquire with your postal code.

Condition: good (used), total length: 40,000 mm, 40 running meters of Bito P20 pallet racking Used goods in very good condition, see pictures. height 3,5 m depth 110 cm, galvanized Field load 12 tons Beam length 2.7 m blue Iodsq Dk Dvopfx Afajtp Beam with load / compartment 1800 kg Negotiated price: € 2.250,-- net ex stock Offer consists of: + 15 pre-assembled frames, depth 110 cm, height 3.5 m + 56 beams, length 2.7 m, 1800 kg load per compartment +112 pcs. safety catches + 60 pcs. concrete anchors Load plates, documents, etc. are included. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock)

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Isdpfx Aemt Dcfefajtp In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided Itodpfxsc Sauzj Afaop -Tool: 82° -Dimensions: 190 x 46 mm -Total length: 355 mm -Lengths: 50/50/75/85/95 mm -Weight: 14 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 2 h, Inotec inoBEAM M8 Universal Peristaltic Pump Inotec inoBEAM M8 is a versatile, electric peristaltic pump designed for spraying insulation and injection. Thanks to its advanced pumping mechanism, the device is perfect for high-density materials such as bituminous masses, injection mortars or sealing slurries. Itodevy Tv Hopfx Afasp Key features: Smooth performance adjustment: allows you to adjust the flow to 8 l/min, which allows for precise adjustment to the specifics of the work performed. Minimal material heating: peristaltic technology ensures minimal heating of the pumped material, which is particularly important when applying temperature-sensitive materials. Versatile applications: ideal for spraying bituminous and mineral insulation, grouting and injection. Optional accessories: can be equipped with a remote control, injection tips or grouting gun, which increases the functionality of the device. Technical data: Motor power: 0.55 kW Power supply: 230 V / 16 A / 50 Hz Maximum working pressure: 15 bar Maximum capacity: 8 l / min Maximum material grain size: 3 mm Weight: 28 kg Dimensions (length / width / height): 60 / 23 / 75 cm Tank capacity: 30 l Application: Bituminous insulation Sealing slurries Mineral injection mortars Aqueous injection solutions Fine-grained putties Cement suspensions A compressor with a minimum capacity of 350 l / min is required for spraying. Inotec inoBEAM M8 is a reliable and efficient tool for professionals looking for a high-quality peristaltic pump for various applications in construction and finishing works.