Toxic gas monitor/detection system

MDA Scientific System 16 Toxic Gas Monitor

Year of construction: 2021, condition: good (used), functionality: fully functional, 676.13 kWp industrial photovoltaic solar plant (2021) The installation was completed in 2021 with an original peak power of 676.13 kWp. It consists of monocrystalline PERC photovoltaic modules installed on ballasted aluminum structures, without roof perforation, and with an approximate inclination of 10°. Energy conversion is performed using 5 Huawei SUN2000-100KTL-M1 three-phase inverters, with a combined nominal power of approximately 500 kW AC and an output voltage of 400 V three-phase. The inverters incorporate MPPT trackers, string monitoring, PLC/Modbus communications, and integrated protection in direct and alternating current. The plant has an ITRON meter responsible for zero-injection control, configured for administrative reasons to prevent excess power from being injected into the grid. It also includes electrical panels, protection devices, conduits, solar cabling, and measurement and control systems. Main features • Installation year: 2021 • Original peak power: 676.13 kWp • Power of disconnected strings: 110.14 kWp • Current peak power: 565.99 kWp • Inverters: 5 Huawei SUN2000-100KTL-M1 • Combined nominal power of inverters: approx. 500 kW AC • Output voltage: 400 V three-phase • Module technology: monocrystalline PERC • Ballasted aluminum structure on the roof • Zero-injection meter: ITRON • Monitoring, measurement, and protection system • Location: El Prat de Llobregat, Barcelona, Spain Itedoznbq Dopfx Acpon • Available for inspection and dismantling study

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KT 615-7, pressure: 15 bar, power: 1,700 kW (2,311.35 HP), temperature: 325 °C, rotational speed (min.): 7,673 rpm, Steam turbine M+M Turbinen-Technik – 1.7 MW Industrial top quality For sale: Complete, high-quality industrial steam turbine installation from the renowned German brand M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documents, manuals, diagrams, etc., are complete and available. Key specifications: Type: KT 615-7 Power: 1700 kW (1.7 MW) Itedpfx Aezbkgiecpsn Year of construction: 2009 Speed: 7673 rpm Inlet pressure: 15 bar (abs) Outlet pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built according to German quality standards and guarantees high efficiency and a long service life. The installation is complete with control and measuring systems, valves, and piping, and was used in an industrial environment. The turbine is currently dismantled/disassembled in preparation (as shown in the photos), which simplifies transport and reinstallation. Ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Reliable and proven technology Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Applications: Combined heat and power (CHP) Industrial power supply Waste heat recovery Process industry 📩 Interested or would you like more information? Please feel free to contact us for technical details, a viewing, or a customized quote.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862 Itedpfxsxcudae Acpon  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: used, Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: RATM 0445, fuel type: gas, color: silver, power: 132 kW (179.47 HP), output current: 270 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 400 kW (543.85 HP), continuous power (apparent): 187 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 15 units available, MTU, Leroy-Somer based ONSITE ENERGY units. Itedpexcvflefx Acpon 7 units worked 5 years x approx. 7000 hours yearly. 5 of those overhauled last year. 8 units worked 2 years x approx. 7000 hours yearly. 3 of those overhauled last year. All units has Leroy-Samer LSAC 47.2 S5 C6S/4 generator. Under separate agreement we can rebuild genset to diesel version. Potentially Leroy-Samer LSAC 47.2 S5 C6S/4 generator can be sold separately.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 Isdpfx Acezn Rcispetn REF: MM6471 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Technical specification: ✅ Manufacturer - CERTUSS Dampfautomaten GmbH & Co. KG, Germany ✅ Model - Universal 600 TC FG/LPG. ✅ Serial number - 15716. ✅ Date of manufacture - 2021. ✅ Steam output - 600 kg/hour. ✅ Fuel - LPG (propane). ✅ Electrical supply - 3 x 415 V / 50 hz, 5.66 kVA, 16 A. ✅ Control - automatic, PLC. ✅ Run time - under 200 hours logged, according to the owner. Supplied with chemical dosing and blow-down vessel. Any further water treatment equipment is not confirmed. Located in Cullompton, Devon. Viewing by appointment. Buyer to remove.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 116,131 h, functionality: fully functional, SIEMENS SGT-300 (TEMPEST) industrial Combined Heat and Power (CHP) / Poligeneration Plant, originally installed in 2008 and designed for continuous industrial operation. The plant is based on a Siemens SGT-300 single-shaft gas turbine with Dry Low Emission (DLE) combustion technology and a complete Waste Heat Recovery System (WHRS/HRSG) capable of simultaneously producing electrical power, process steam, thermal oil and chilled water. Gas Turbine • Manufacturer: Siemens • Model: SGT-300 (TEMPEST) • Year: 2008 Itedpfjzmga Ijx Acpsn • Type: Industrial Single Shaft Gas Turbine • Fuel: Natural Gas • Dry Low Emission (DLE) combustion • ISO Electrical Output: 7.9 MW • Site Output: approx. 7.6 MW • Generator Voltage: 6.3 kV • Frequency: 50 Hz • Generator Speed: 1,500 rpm • Electrical Efficiency: approx. 30.5% • Exhaust Gas Flow: 30.2 kg/s • Exhaust Gas Temperature: 545°C • Continuous duty (24/7 operation)Complete heat recovery package including: ✔ Thermal Oil Heater – DOWNTHERM A – 4.3 MW ✔ Thermal Oil Heater – SANTOTHERM 66 – 3.88 MW ✔ High Pressure Steam Generator (25–26 bar) ✔ Low Pressure Steam Generator (4.5 bar) ✔ Hot Water Generator ✔ Single Effect Absorption Chiller Cooling capacity: 1.7 MW Production of: • Electricity • High pressure steam • Low pressure steam • Thermal oil • Hot water • Chilled waterOperating hours: 116,131 h, according to control panel Starts: 677, according to control panel Location: Spain Documentation: Available upon request Inspection: By appointment

Condition: used, Year of construction: 2000, Glass melting equipment for making glass insulation for lamp heads. Ijdpexbyz Usfx Acpetn

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA - Double-sided profiling machine - length of the profile 180 – 850mm - width of the profile 30 – 75mm - thickness of the profile 10 – 45mm - spindle diameter 30mm - max. disc diameter 250mm - 4 discs in a set 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of the dust extraction nozzle 5x100mm - dimensions L/W/H 1900x2230x1530mm DDGA - Four-sided planing machine - width of the workpiece 35 – 130mm Itedpjzkt Rzofx Acpen - thickness of the workpiece 10-60mm - min. length of the workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of the chain via oil pump - diameter of the dust extraction nozzle 4x120mm - dimensions L/W/H 3200x1370x1830mm DBCA - Profiling machine feeder - max. feed rate 40m/min - max. width of the profile 150mm - motor 0.55kW - overall dimensions L/W/H 2320x600x1150 DBGA - Moulding machine feeder - length of the mouldings 200-600mm - width of the mouldings 30-20mm - thickness of the mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions L/W/H 1500x500x980mm - total weight approximately 4900kg Net price: 63900 PLN Net price: 14860EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell goods that the manufacturer has previously introduced to the market. We have no business relationship with the manufacturer.

Condition: ready for operation (used), Hello, I have a used, galvanized, tilting, and rotating structure for photovoltaic systems available, measuring 10.5 m by 5 m. The entire unit is foldable. Itjdpezx Uwlofx Acpsn Currently, 12 panels with a total power of 7.5 kW to 9.5 kW are installed, and the buyer will receive these panels along with the automation system free of charge upon purchasing the tracker. We have 1000 sets available, and customers can choose the configuration that best suits their needs. If you are interested, please contact me.

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. Ijdpfx Ajza E Raocpetn They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.