Telehandler Fixed

Merlo Panoramic P 38.13 SL33

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t Pedpfx Asw D Awmoazjrb stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 2013, Operating hours: approx. 1550h, displacement: 6728cm³, power: 107kW, total weight: 16.5t. Including winch, work platform, high-pressure hose with reel, forks and lattice boom extension. A new rotary union is available as a spare part. An on-site inspection is possible. Podpfx Aszx Eg Rsazorb

Condition: new, Year of construction: 2024, functionality: fully functional, Semi-automatic horizontal orbital stretch wrapping machine designed for wrapping long products such as timber, aluminium profiles, plastic extrusions, pipes, textiles and similar materials. Equipped with infeed and outfeed roller conveyors for easy product handling. Modell Robopac Compacta 12 Production year 2024 Installed power 1,5 kW Podpfx Aajzkf Skjzjrb Diameter 1200 mm Feeding roller Yes Outfeeding roller Yes Condition New (not used) Conveyors 2 pc. INCLUDED

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. Predpfx Aowzmcbjazjb • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Prsdpfx Asn Armwsazob Can be inspected and tested by appointment.

Condition: good (used), functionality: fully functional, fuel type: diesel, color: green, empty load weight: 8,650 kg, lifting power: 3,800 kg/m, lifting height: 12,600 mm, mast type: telescopic, Year of construction: 2017, Equipment: cabin, pallet forks, ID111069 Prjdpfxszhmz Ij Aazsb MACHINE: Telescopic handler BRAND: Merlo MODEL: P38.13EE Panoramic YEAR: 2017 ENGINE: Diesel OPERATING HOURS: unknown TRANSMISSION: automatic DRIVE: 4WD MAST: Telescopic CAPACITY: 3800 kg LIFTING HEIGHT: 12.6 m TYRES: Standard CONDITION: Good

Year of construction: 2010, condition: ready for operation (used), A Costa Levigatrici wide belt grinding and deburring machine is available. Working width: 1150mm, abrasive belt dimensions X/Y: 1180mm/2200mm, max. speed: 18m/s, contact roller diameter: 200mm, pressure roller diameter: 55mm, max. workpiece thickness: 160mm. Machine dimensions X/Y/Z: approx. 1850mm/1950mm/2100mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Prodpfezlkacjx Aazjb

Condition: used, fuel type: diesel, lifting height: 18,000 mm, Year of construction: 2023, operating hours: 2,780 h, Empty weight: 11.520 kg Pedpfxezdufte Aazjrb Carrying capacity: 4.000 kg GVW: 15.520 kg Dimensions (LxBxH): 626 x 232 x 270 cm

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 9 h, load capacity: 3,500 kg, lifting height: 4,820 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, power: 45 kW (61.18 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,290 mm, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: New Technical condition: New Front tire type: Superelastic Front tire size: 28-9 x15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.50x10 Rear tire condition: 80 - 100% Side shifter, 3rd valve, 4th valve, rear work light, front work light, load guard, full cabin, full free lift, CE certificate, interior mirror, exterior mirror, rotating beacon, windshield wiper Pjdpfsy U R Dcex Aazerb

Condition: used, Year of construction: 1979, Technical details: floor-plate length: 6400 mm plate width: 1870 mm plate height: 415 mm weight of the machine ca.: 8600 kg transport dimensions LxWxH: 6,4 x 1,9 x 0,42 m Predpfxou N Dqdj Aazob Very high quality (no damage) Steel Plate - T-groove DIN 650 - a=36; h=69; b=59; c=25mm; Groove distance= 315mm - included: 26 cover plates Ø 147 x 3mm *