Used Bender for sale (745)

Condition: good (used), Muhr + Bender KBL 16 Optima Muhr und Bender Optima KBL 16 Hodoyy S E Sepfx Af Teff Round steel 45 mm Square steel 42 mm Angle steel 90×9 mm Throat depth of punch 500 mm

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN Hodpfxjd Ih Sts Af Teff throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Hfedpjyvvkwofx Af Tof Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation Hfodpfxjxf Utao Af Tsf - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover Hfsdpfx Afoxaaipo Tof - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Max. coil width: 600 mm Mandrel diameter: 80 mm Hfsdpfx Afjyf Aiwe Tjf MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Connected load: 400 V

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, Hodsu Id Ruspfx Af Teff control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min Hsdpfxexu Dxqe Af Toff number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm Hedpfxju Ickye Af Teff knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Hfodjvvx E Sepfx Af Tsf

Condition: good (used), Mubea Muhr und Bender section shear combined Hfedencc Hujpfx Af Tjf Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible. Hfsdpsium Stjfx Af Tof

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm Hfedpfx Afjqfgy Hj Tsf - workshop overhauled Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Hfedpjium Euofx Af Tsf Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Hodjvhig Rjpfx Af Toff

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Hjdpefkmr Sjfx Af Teff Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: excellent (used), Year of construction: 2004, Ref: 11090 . 2004 Heidelberg Plate Bender B1 format Hfsdpfoy A Rn Dex Af Tef

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used profile bending machine from PIESOK / VSŽ UNICORN TORNALA Hedpfx Afoy An A So Tjff Type: XZPP 75/9 Shaft diameter: ø85 mm 3 driven rolls Hydraulically adjustable support rolls Year of manufacture: 1994

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Hfodjww Eqcspfx Af Tsf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2001, control type: manual, actuation type: electric, number of rollers: 3, shaft diameter: 30 mm, Well-maintained used section bending machine, equipped with a standard roller set plus several larger discs. Also features digital readout of the bending roll position. Hfsdpfoyzcbmsx Af Tof

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Hfedpfx Askwcc Nsf Tjf Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Hsdpfxekvm Szo Af Tsff Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Hjdskvm S Nopfx Af Tjff Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Angle bender Manufacturer: DAKO Bending height: 100 mm Hodpfxjyxbvwo Af Tsff Base area: 260 x 225 mm Total height: 215 mm Weight: 30 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 5007078, Offer 26085 Technical Data: - Bending capacity: Tubes at 45 kg/mm² up to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle: 0 - 180° - Maximum central bending radius, Rm: 171 mm - Minimum inside bending radius, Ri: 10 mm - Drive: 400 V / 4 kW - Space requirement: approx. W 400 x H 950 x D 600 mm - Weight: approx. 100 kg - with pre-selection for bending angle - Digital bending angle display + fine adjustment - 8 bending tools included: - ½" R 46 mm - 25 R 56 mm - 30 R 67 mm - ¾" R 56 mm - 1" R 67 mm - 1 ¼" R 100 mm - 1½" R 130 mm Hfedpfeyz R Tkex Af Tjf - 2" R 150 mm