Used Broaching Machine for sale (65,174)

Condition: used, Year of construction: 2017, 1 Cleaning machine HS200/1600-3, manufacturer: Stenhoj / HESO, year of manufacture: 2017 / 2015, mains connection: 400V, 50Hz, nominal pressure: 4 bar, dimensions (L x W x H): 4.284m x 6.62m x 3.85m / 4.3m x 1.8m x 2m, weight: 1.6t, Stenhoj: electromechanical cleaning machine with lifting table, 200kN at 6m/min including workpiece holder, HESO: used for washing, rinsing and drying workpieces using aqueous solutions, pumps, manufacturer: Ebara, blowers, manufacturer: Becker, operating hours of the individual units: 15,000 / -, average utilization: 85%, last documented maintenance: 04/26/2024, system generally operational, follow-up work has been carried out. Rodpj Aa Acpsfx Abujch

Condition: used, BROACHING MACHINE Redpfx Ajt Hr Dfjbusch

Condition: used, Indexing table 400 mm hand Full set of tooling included (guide bars etc) Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg transport can be arranged Rcsdpfxez D I Rmo Abueh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH Rjdpfx Aboz Eh Egsujch

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) Rcedpfx Abjxxb Rrsueh 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: Rcodpfxex D Tbmj Abush 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Rsdpfxozugnhj Abuech

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new Rcedjw Ighiepfx Abueh - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Rjdpfx Asz St Hwsbujch Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: ready for operation (used), functionality: fully functional, Cable pulling machine / RAUSCH RS 6 /1300 with pulling extension & accessories -Ram stroke / stroke length - Standard 1300 mm (+ pulling extension) -Pulling force 6000 kg -Various cable pulling tools Redsz I Dbvopfx Abusch -Various accessories -Workbench Dimensions (disassembled) L x W x H 1.6 x 1.7 x 2.3 meters / Weight 3500 kg Errors and omissions excepted.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits Rcsdpfx Absytvyxjuoh - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, Rodpfjz R Rbdox Abuoch 24 station ATC.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT. Rjdpfxsztptqo Abuoch

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Travel: 0 to 300 Stroke: 3 to 52 Weight: 2.5 tons Rjdpfx Aez Ingvsbusch Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 In very good condition

Condition: excellent (used), Year of construction: 2023, 400mm swing, Rjdpez Srv Djfx Abuech 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Note: The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Rcjdpfx Abjz Hl U Ijujh Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 Rcsdpfx Abez Hq Akeueh - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Rcedpfor A Hcbex Abuoh Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Rcsdpfx Aj Aayk Rebuoh Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: good (used), Year of construction: 1970, pulling force - max. 2 t max. ram stroke 400 mm Rjdpfxjz Ic A Es Abusch max. workpiece diameter 1000 mm workpiece weight 10 t clamping table 900 x 680 mm total power requirement 5,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,3 x 1,2 x 1,5 m

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench -Setting plates Redpfx Aoza U Alobusch -Crane -Platform -2x tool cabinets Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Errors and omissions excepted.

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. Rcedpfx Aotuuvzjbueh The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Rcsdpfx Aoz Iz Imsbueh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Rjder A Hdgjpfx Abujch Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Direct contact details and further information can be found in the attached PDF document

Condition: ready for operation (used), Vertical thread-rolling machine HENNING 03E -Henning - Metzingen -Year of manufacture 1981 -Rolling length approx. 1100mm -Motor power 3KW -Coolant system Dimensions L x W x H 0.7 x 0.5 x 1.7 meters / Weight approx. 450 kg Subject to errors and omissions. Rcjdszkv Euspfx Abuoh