Used Industrial Furnace for sale (26,717)

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug Rsdsfbl T Nepfx Aaajr The interior installation can of course be completely removed!

Condition: ready for operation (used), Door glass present Interior dimensions: Rsdpsyk Et Njfx Aaaer Width: 340 mm Height: 355 mm Depth: 360 mm Rated temperature: 500° C

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Rsdpfjfz Anpox Aaaer 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! Rjdefz U Tqjpfx Aaajr The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Rodpefy Txyjfx Aaaor Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Unused bin washer. Bought for a contract which never materialised. Redpfx Aetpv T Njaasr

Condition: ready for operation (used), Year of construction: 2016, laser power: 150 W, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, number of axes: 3, CO₂ laser cutting machine manufactured in 2016. This HARTWEG industrial Bodor CL-1610XUF features a working area of 1600 × 1000 mm and a laser power of approximately 150 W. It offers impressive engraving speeds of up to 60,000 mm/min and cutting speeds of up to 40,000 mm/min. If you are looking to get high-quality laser engraving and cutting capabilities, consider the HARTWEG industrial Bodor CL-1610XUF machine we have for sale. Contact us for further details. • Working area: 1600 × 1000 mm • Laser system: • Laser type: CO₂ sealed tube • Cooling system: Water cooling • Performance: • Engraving speed: up to 60,000 mm/min • Cutting speed: up to 40,000 mm/min • Positioning accuracy: ±0.01 mm • Max resolution: 4000 DPI Redpfx Aeywxcxsaaer • Control: • Control system: DSP • Software: RD Works 8 • Electrical data: • Input supply: 220V / 50Hz • Power consumption: 3.5 kW

Condition: like new (used), Year of construction: 2019, 2.0 units Autonomous Mobile Robots Manufacturer: Mobile Industrial Robots Model: MIR 100 Redewrqtxspfx Aaasr Year of manufacture: 2019 Payload: 100 kg Control via PC, tablet, or smartphone

Condition: used, Year of construction: 1995, De Dietrich Industrial Boiler – Type GT 517 Manufacturer: De Dietrich (France) Redpfxjyntqwj Aaasr Model: GT 517 Year of manufacture: 1995 Technical data (from nameplate): Water capacity: 789 liters Heat output (Germany): 775–820 kW Oil/Gas input range: 845–900 kW Heat flow: 761–978 kW Maximum operating temperature: 120°C Maximum working pressure: 6 bar Voltage: 230V / 50 Hz Electrical power: 100 / 200 W Heat exchange surface: 28.46 m² Made in France Burner: Weishaupt gas burner Control: York International control panel (Gas burner 1) Condition / sale terms: Used unit, offered as-is, as seen

Condition: refurbished (used), Year of construction: 2019, number of ink cartridges: 9, color channels: CMYK lclmlylk White, efi Vutek H5 3.2m industrial UV printer, fully refurbished Installed in production in 2020 and under full efi service Resolution: Ricoh Gen 5 printheads (7pl-1200dpi) Colors: 8 C + White / Varnish over Fast 4 + White/varnish Rsdpfsyu Rqhox Aaajr (White overprint and white underprint) Multilayer print modes for color, white and varnish Print width: 3.2m, flatbed and roll-to-roll option Speed up to 457 m²/h User interface with touchscreen monitor Mesh – Multi Roll efi Fiery Rip Server

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Rjdpfx Aaou Ixt Doaer

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Rjdpeu Ixkpjfx Aaaor

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Rodjvtcqgepfx Aaaor

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Rsdevvw Niepfx Aaaor

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: Rsdpjk Abwlsfx Aaaer 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Rodpfx Aed Sm Disaaer Max temperature: 700 C °

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 77 kW (104.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,400 kg, input voltage: 400 V, total width: 2,100 mm, total length: 2,600 mm, total height: 2,350 mm, warranty duration: 6 months, heating capacity: 87 kW (118.29 HP), Aircooled chiller/Heat pump DAIKIN EWYQ080 DAYN 77 kW/87 kW Rsdpfoyymh Usx Aaaor Cooling capacity: 77 kW / 21.9 tons (12/7 — 35°C) Heating capacity: 87 kW / 24.7 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SJ180B4ABE (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 2.6x2.1x2.35 m Weight: 1400 kg Working hours: 11860/11861 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 467 kW (634.94 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,090 kg, input voltage: 400 V, total width: 2,240 mm, total length: 4,040 mm, total height: 2,230 mm, warranty duration: 6 months, Aircooled chiller DAIKIN EWAD470D SS027 467 KW Cooling capacity: 467 kW / 132.79tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Daikin HSA1920S11YA (screw) + 1 pcs. Daikin HSA2040S11YA (screw) Type of refrigerant: R134а Number of fans: 8 pcs. (2 pcs. Frequency inverter) Dimensions: 4.04x2.24x2.23 m. Weight: 4090 kg. Working hours: 8485/3155 h. CONDITION, TESTING & READINESS Rodpfxjyx Dnvj Aaaor The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Year of construction: 2015, condition: good (used), Deburring machine, used Make: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed 2-8 mm/s Feeding speed 0,6-3,2 mm Extraction: Donaldson Performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel, or aluminum that have been cut in a laser, shearing, or punching machine. Rjdpfx Aeikm Tkoaaor Dimension; 2730x1740x1940 mm Weight: 1790 kg.

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Rodsyrtk Sopfx Aaajr Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: used, Large Gas-Fired Furnaces for Sale: Redjvitnhspfx Aaaer 7500 long x 2780 wide x 2000 height. These are Internal - bed sizes Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Mixer tank with blender, YIT Industrial and Network Services Ltd 2010. 3000L, stainless steel. ABB motor and SULZER gearbox. Siemens 7ML5221-1AA1, SITRANS Probe LU ultrasonic level transmitter monitors level and volume in liquids and slurries. Sprinkler washing system. Drain outlet at the bottom and a tap on the side. Rodpsylpxfsfx Aaajr Condition like new with minimal usage. Estimated motor hours: under 100h. Has been used for clay and glaze. Second tank in main picture included in the price, tank only – no motor, etc.

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Redpfxsv Ihgvs Aaaer

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Rjdperfdq Uofx Aaaor

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 512.3 kW (696.53 HP), type of cooling: air, overall weight: 1,386 kg, total width: 2,400 mm, total length: 6,800 mm, total height: 1,570 mm, warranty duration: 6 months, Dry-cooler THERMOKEY GH2390.BZ 2/03 V Q1EEpF(EC)S 512.3 KW Cooling capacity: 512.3 kW (44/37 — +28C) Year of manufacture: 2022 Fluid: Glycol + Water Fluid flow: 67,4 m³/h Air flow: 152415 m³/h Number of fans: 6 pcs. Fan Diameter: 900 mm Volume: 248 dm³ External surface: 1329 m2 Dimensions: 6.8 x 2.4 x 1.57 m. Weight: 1386 kg. CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available Rjdpfx Aaoxyw Dqeajr - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.