Used Plum Stoner for sale (194)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Pedpfjx A Nn Tox Ah Uerf Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: reconditioned (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel with circuit breaker DGUV V3 tested Prjdpfx Aoidui Ujh Usf Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 6 months warranty Option: cherry plate cherry stoner Visit our big bakery machines exhibition

Condition: good (used), Thickness of sanding paper 1,1 mm Width of sanding paper 34 mm Prjdpfx Asxwzbhoh Uof Length of sanding paper 5620 mm a total of 19 units in stock

Condition: new, Year of construction: 2023, GG JAPAN 1000 Gunter Grossman & Kubota The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable track undercarriage 6. Articulated Boom pro 7. Hidden driving motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy tracks for a pleasant ride.. Predpfxoh Uymye Ah Usf 14.2 driving speeds We have all spare parts for machines of our brand available throughout Europe Price 11990 EUR (excl. VAT) (Including: Excavator GG1700 bucket 380 mm) SPECIFICATIONS Model: Japan 1000 Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated Power: 11.8kw/2300r/min Main pump: Parkier Swing motor: Eaton Drive motor: Eaton Driving speed: 3 km/h Stick: Movable sideways Driving speed: two speeds Drive Motors: Hidden Snakes in the style: Hidden DIMENSIONS Total dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770mm Total length of the track 960 mm WORKING RANGE max. Digging depth: 1650 mm max. Digging height: 2610 mm max. Digging radius on the ground: 2890 mm Turning radius: 360° max. Dozer Blade Upgrade Height: 345mm max. Dozer blade digging depth: 255 mm

Condition: used, mileage: 44,000 km, power: 130 kW (176.75 HP), first registration: 08/2008, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 04/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 7,900 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,070 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Year of construction: 2008, Equipment: ABS, soot filter, tail-lift, 2nd owner since 2010. Original mileage only 44,600 km. MOT (TÜV): valid until April 2026 (a new inspection can be arranged at any time upon request. There are no deficiencies on the vehicle). Liftgate UVV inspection: valid until April 2026. Service: due April 2025. Batteries: new as of April 2025. Pedpjwd Aufefx Ah Uerf Registered as 'Other motor vehicle breakdown assistance.' In practice, this Atego is a standard box truck with side door and tail lift. Box body by SAXAS Nutzfahrzeuge Werdau AG, type MKD 61-M. Pallet width. Loading dimensions measured: 6.07 m length / 2.48 m width / 2.35 m height. Tail lift: BÄR Cargolift BC 1000 S2. Additional right-hand side door (hinged) with sliding entry step. Payload: 2,110 kg. Ringfeder trailer coupling with air connections, approved for trailer load = 11,235 kg. Front leaf suspension, rear air suspension with lifting and lowering function. Technically, this Atego is a true 8-ton truck. Currently registered with downgraded gross weight to 7,490 kg and recently deregistered in that configuration. Wheelbase: 4,220 mm. Euro 5 BLUETEC 5 engine. 6-speed manual transmission. ABS and ASR. Electric windows and mirrors. 3 seats. GRAMMER comfort driver's seat with seat heating. CD radio. Digital tachograph (Stoneridge). Analog indicator for vehicle battery charge status. This vehicle was kept internally for many years as an on-call emergency response unit. The Atego has been moved and serviced regularly, but was rarely actually needed. This explains its extremely low mileage. Overall condition is very good for its year. In fact, this unit is virtually unused. The vehicle has seldom, if ever, been subjected to heavy loads. Tyres all with 80-90% remaining tread. This truck is also a perfect base for conversion as a logistics support vehicle (Gerätewagen Logistik, GW-L) for fire brigades, aid organizations, or other authorities. Tachograph inspection valid until 12/2025. The Atego was transferred 600 km on the motorway without any issues. It drives excellently. This offer is only valid for businesses or government entities. Subject to prior sale and errors. Net price: €22,500!

Year of construction: 2020, condition: new, Stainless steel design auger type infeed hopper For de-stoning of cherries, plums, sour cherries, apricots, peaches,... For different sieves Sieve with perforation Ø 5 mm is in the machine Pjdpfxscl Tu Io Ah Usrf Electrical power supply: 400V 50 Hz 3 Phases / 11 kW Capacity: 2500 kg/h (depending on fruits and ripeness) Stepless rotor speed regulation

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Prodpox A Nntsfx Ah Uof Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: used, mileage: 395,200 km, power: 355 kW (482.67 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SC LD GENTIAN BLUE Electrical connection trailer 24V/15-pin cable: 15-pin EBS Antennas: AM/FM, 2x mobile radio, GNSS Automatic idle shutdown, 5 minutes 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 OBD, Euro VI Step E Auxiliary heating with waste heat pump and timer Automatic transmission with manual transmission, full version Basic immobilizer Front axle(s): 315/60R22.5 Digital tachograph, Stoneridge 1C Rear: 11.50 t, air suspension, SR1344 Halogen headlights with height adjustment Emission class Euro 6 Max. gross combination weight Drive power 50,000 kg Class 3 Traction Control (ASR) Space Cab - Driver's Cab 400 l aluminum fuel tank, height 580 mm Driven rear axle(s): 295/60R22.5 Driven rear axle with disc brakes Catwalk with step, standard LED worklight 90 l AdBlue® tank, on the left fender TraXon automated transmission, 12-speed Eco-Fuel Interior trim color: Dark Sand Left fuel tank Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 7,500 kg, load index 154 Rear axle 1, 11,500 kg, load index 145 Driver's cab, interior trim in Delta black Protective net on both berths Soft-touch steering wheel, black Rear axle ratio 2.05 Electronic Stability Control (VSC) Driver's seat armrest Lower sleeping berth without drawer Glass roof hatch, electric operation Fog lights Lane departure warning system Power windows Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Central locking Upper bunk Reverse alarm MX-13 engine, 355 kW/483 hp Cab badge: 480 ZF Intarder Front: 8.00 t, air suspension, 161 N Adjustable roof spoiler for Space Cab Prjdpfx Ajwkyv Hoh Ujf Side fenders H3302 Gentian Blue Wheelbase 3.80 m/rear overhang 0.87 m Coolbox or refrigerator Automatic cab climate control Predictive cruise control Radio/USB player, two speakers Truck phone ECAS remote control with advanced features Driver's seat: Luxury Air

Condition: used, Price for one piece! Prjdpsxwp E Ijfx Ah Ujf

Condition: new, Year of construction: 2024, GG06LX The only backhoe loader with these dimensions on the market. The machine is characterized by a high-efficiency engine, the new professional backhoe loader: GG06 LX from the international brand Günter Grossmann. Like all Gunter Grossmann machines, the machine has a company warranty so you can work worry-free. The GG06 LX model is a great machine for construction, electrical and plumbing companies. Backhoe loaders are manufactured based on advanced technology that has been used in our company for many years. We have all spare parts for machines of our brand in stock in Europe Price 16500 EUR (excl. VAT) Backhoe loader equipped with 2 buckets SPECIFICATIONS Brand: Gunter Grossmann Model: GG06LX Gross weight: 2280 kg Engine: Kubota D1105 Fuel type: diesel Number of cylinders: 3 Rated speed: 3000 (r/min) Rated power: 18.4 (kw) Displacement: 1,123 (L) Cooler: yes Engine oil quantity: 4L Excavator hydraulic pump: Parker USA Hydraulic pump loader: PWG Italia Hydraulic oil loader capacity: 84 L Excavator hydraulic oil quantity: 42L Hydraulic tank capacity: 22 (L) Hydraulic tank capacity: 22 (L) DIMENSIONS Length: 4900cm Width: 1150 cm Height: 2350cm Wheel specifications : 26×12.00-12 26×12.00-12 Loading box width: 1150 mm min. clearance: 155 mm driving speed: 12 (km/h) min. turning circle: 2400 (mm) WORKING RANGE Body capacity: 0.6 (m3) Load capacity: 600kg Loading height charger: 2000 (mm) loader digging depth: 240 (mm) Loader bucket lifting time at full load: 8 (s) Bucket lowering time: 4 (s) Predjp Aru Rspfx Ah Usf Nominal bucket capacity: 0.08 (m3) Excavator maximum digging height: 3200 (mm) Excavator unloading height: 1990 (mm) Excavator Max. Digging depth: 2490 (mm) Excavator tilt angle (left/right°) 52/59 Excavator rated pressure: 20 (MPa)

Condition: refurbished (used), Year of construction: 2019, operating hours: 11,487 h, load capacity: 2,950 kg, lifting height: 7,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,287 mm, fork length: 1,200 mm, empty load weight: 4,252 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—ensuring maximum quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get expert advice onsite now – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG S30 Drive type: Electric Load capacity: 2,950 kg Year of manufacture: 2019 Operating hours: 11,487 Lift height: 7,500 mm Mast type: Triplex Free lift: Yes Overall height: 3,287 mm Fork length: 1,200 mm Unladen weight: 4,252 kg Load center: 600 mm Tires: Solid rubber Model type: EFG S30 Battery type: PzS Battery weight: 1,863 kg Cab type: Full cab – front, roof & rear windows + steel doors (suspended) Cab equipment: Solopilot control element Lighting: All-round warning light Psdsw Izdxopfx Ah Usrf Lighting: BlueSpot rear safety light Attachment: Sideshift Attachment: Additional hydraulic circuit – plumbed to the fork carrier

Condition: used, workpiece length 3000 mm roll diameter 50 mm work piece width 300 mm Roll lenght 210 mm Predpfoxmkzvjx Ah Usf Height 800 bis 1100 mm No. - Rolls 12 dimensions of the machine ca. 3 x 0,33 x 0,55 m Lightly used discharge roller conveyor with fold-up stop and measuring scale. Machine dealer with own stock of 2500 m².

Condition: used, conus taper ISO 50 mm Machine dealer with own stock of 1600 m². Predpoxwdtaefx Ah Ujf

Condition: good (used), Year of construction: 2002, cutting diameter 320 mm saw band length 4160 mm cutting width 610 mm cutting lenght max. 500 mm clamping head: max. 620 mm saw speed stufenlos 15-120 m/min work height max. 760 mm dimensions of saw-band 4160 x 34 x 1,1 mm Control Siemens Siematic OP3 total power requirement 2,6 kW weight of the machine ca. 1,96 t dimensions of the machine ca. 2,55 x 2,45 x 1,5 m Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week! Estimated operating hours = 3400. Cutting range 0° / 90° - round 320 mm - FLAT 610 x 320 mm !!!! Cutting range 75° - round 320 mm - flat 350 x 200 mm Cutting range 60° - round 300 mm - flat 300 x 200 mm Cutting range 45° Psdpov Htimofx Ah Usrf - round 260 mm - flat 250 x 180 mm Cutting range 30° - round 160 mm - flat 150 x 150 mm Please notice: Price of this machine new: €28000 Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 Pjdoxuv I Repfx Ah Ujrf column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1993, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t Predpfextfx Asx Ah Usf dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: used, pressure ca. 5 t dayligth 110 mm throat 40 mm weight of the machine ca. ca. 50 kg dimensions of the machine ca. 1,2 x 0,5 x 1,3 m Psdpjxr Ravjfx Ah Uorf 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm Pedpfsvn Al Tex Ah Uorf grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW Prsdpfx Aov Dxzpeh Uof weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: used, conus taper 40 mm range L-W-H H & K: 0,68 x 0,45 x 0,45 mm range L-W-H Hoffman: 0,72 x 0,5 x 0,4 mm Tool rack for ISO 40 chucks. 1 x Hahn & Kolb (blue), 54 spaces, plastic frame = €380 Dimensions: 0.68 x 0.45 x 0.45 m Pjdpswi Ug Rofx Ah Uorf 2 x Hoffman (green), 42 spaces each, sheet metal frame = €320 each Dimensions: 0.72 x 0.5 x 0.4 m

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Podpfsxqrdmjx Ah Usrf Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1998, dia. of draw-in collets 17,5 mm internal taper of cone draw-in collets MK 1 , Mk 2, Ga speeds of grinding spindle 2800 U/min total power requirement 0,25 kW weight of the machine ca. 67 kg dimensions of the machine ca. 510 x 565 x 290 mm Milling cutter grinder with a base cabinet for grinding milling cutters or styli in a central and offset position. The dividing head holder allows for circular movements in all directions, as well as longitudinal and transverse movements of the tool axis. The tool holder has a 40 mm longitudinal adjustment, a 10 mm lateral adjustment, and a 15 mm fine adjustment of the dividing head holder relative to the grinding spindle. Podpexr Raiofx Ah Uorf Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2011, arm length 2500 mm Psdpfx Ahjvrk Ahj Ujrf total column height 3100 mmm weight max. in kg 125 kg swivelling range 270 Grad height over floor 3254 mm weight 945 kg ABUS SV pillar jib crane with chain storage and electric ABUS chain hoist, inspection book available. Crane is dismantled and ready for shipping - see last photo. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built Prjdpfxjxfb E Ae Ah Uof in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: used, bed width 220 mm daylight 130 mm centre height 240 mm Podpfx Ahsxn Tw As Uerf dimensions of the machine ca. 0,5 x 0,3 x 0,15 m weight ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m².