Used Tube Bending Machine for sale (65,647)

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report Dkedpfx Ao Ahiuaspmew • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Dkedpfx Apozzkvpjmow Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: new, – Capacity: 34 x 3 mm – Digitally adjustable stroke – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg Dksdpsxq Hl Eefx Apmsw – 400V

Condition: used, Year of construction: 2002, overall weight: 8,000 kg, total length: 6,700 mm, total width: 2,400 mm, total height: 1,900 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Based on the following description, here is the machine description in Hungarian: Dksdpfs Aarrysx Apmew We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Type: CNC 80/60 E TB MR Year of manufacture: 2002 Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 42 mm, pipe length (max.): 2,000 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 220 bar, Equipment: documentation/manual, emergency stop, Sommer pipe bending machine for sale Djdpfx Apj Aazvnsmokw We are selling a Sommer pipe bending machine. The machine is fully functional and can be tested on-site with power, subject to prior arrangement. The original hydraulic unit has been replaced with an external hydraulic unit. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Dkodpfxepu R Nve Apmew Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Djdezn Rdmopfx Apmekw Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Dedpfx As Af Utajpmjkw Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for angle iron • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg Dkjdpfx Ajqy E R Topmew BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Dsdpfs Agu D Esx Apmskw Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: ready for operation (used), functionality: fully functional, Pipe bending machine from Amga. Includes tools. Dedpfx Apjz Szfhemekw

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools Dedpfoznu Sbox Apmekw -CE marking -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: new, functionality: fully functional, Year of construction: 2026, tube bender R 1 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling Dkodsfiqntjpfx Apmsw - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Djdeyvhl Hepfx Apmokw Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Dsdpfxezd Hhmo Apmekw

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm motor: 30 kW Djdpfeykl Rzsx Apmokw

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Dkjdpsz Ny Rksfx Apmjw Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-Axis CNC Tube Bending Machine BLM Dynamo – 0 Serial number: 605970300001 Year of manufacture: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control: DOC 85C BLM Bar Loader BLM CARM 7 Serial number: 340040102059 Year of manufacture: 2004 Weight: 405 kg Without conveyor belt Without protective guard TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Dedpfx Ast R Tgiopmekw Bending capacity, round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity, round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity, round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar loader: BLM Carm 7 (Year: 2004) Positioning speed, X-axis: 2000 mm/s Bending speed, H/Z Y-axis: 500 °/s Rotation speed, Z-axis: 900 °/s Rotation speed, Z-axis: 100 °/s Positioning speed, T-axis: 500 mm/s Measuring tolerance, X/T axis: ± 0.1 mm Measuring tolerance, Y/Z/Q axis: ± 0.1° Maximum reach with maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - ° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control: DOC 85C Ex works Dortmund, free loading onto truck.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Dkodpoy Uuw Tsfx Apmow Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Dkjdpfx Apeyr H A Iomsw Inspection and demonstration possible by appointment.

Year of construction: 1990, condition: good (used), machine/vehicle number: 2ß90 522, Technical specifications: - Bending capacity: - Steel pipe: Ø 20 - 60 x 4 mm - Stainless steel pipe: Ø 20 - 50 x 3 mm - Max. bending moment: 6.2 cm - Max. bending angle: 180° - Max. radius: 125 mm - Bending speed: 8 sec - Drive: 400 V / 3 kW - Space requirement: approx. L 2400 x H 1600 x D 1000 mm - Weight: approx. 1400 kg - Includes: - Bending angle control via potentiometer with digital display - 6-fold preselection of bending angles - Internal + external pipe deburring tool - Bending tools Rx2.5D: Ø 38; Ø 50; Ø 65; Dkjdsfndg Espfx Apmsw

Condition: used, Year of construction: 1980, TUBE BENDING MACHINE Dkedpfx Aerq D N Ropmjw LANG TYPE EL90 Φ 90

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Dkodpfoq Nipyex Apmsw Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, overhauled in 2002 Technical data: - Bending capacity at 45 kg/mm² up to approx. Ø 25 x 3 mm - Bending angle selectable left and right - Hydraulic double-sided bending function - Hydraulic approach - Drive: 400 V / 11 kW Dksdpshrdmbsfx Apmjw - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - including: - Bending angle adjustment - Hydraulic tension - Bending tools

Condition: good (used), pipe diameter (max.): 30 mm, input voltage: 380 V, Tube bending machine Brand: Margua Model: CEM-30 Maximum bending capacity: 30 x 1.5 mm Maximum square tube capacity: 25 x 25 x 1.5 mm Maximum center radius: 115 mm Minimum inner radius: 25 mm Motor power: 4 HP (Three-phase 380V) Tube accessories: Dodpfxez Dti Ij Apmskw - Dies for 22mm tube - Dies for 28mm tube - Dies for 20.5mm tube Drive and control: Electromechanical with angle selector and mechanical stop. Bending system: Die-forming draw bending (with or without mandrel).