Used Vacuum Sintering Furnace for sale (4,162)

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Bsdefbl T Nopfx Aaajwk Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. Bedsmfn Ruopfx Aaaowk

Year of construction: 2009, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN FX036084, 12 months warranty, in stock Resistance-heated unit with gas-tight furnace muffle - Continuous operation Tmax 800°C - Max temperature approx. 900°C (under protective gas) - SE-402 program controller - 3-zone heating - Gas supply system: 2 different protective gases, as well as fuel gases - Gas circulation - Vacuum system - Internal muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle capacity approx. 722 liters - Max. charge weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare system with flame monitoring - Sight glass DN150 - Max. operating gas pressure 7 mbar - Mains voltage 400V, 3-phase, N, PE - Heating power 70 kVA - Rated current 3x97A - Weight 1900 kg - External furnace dimensions (W x H x D): 1700 x 1950 x 2750 mm - Control cabinet (W x D x H): 510 x 1360 x 500 mm - Operating manual, circuit diagrams, CE declaration Bwodpfx Aaoyxlwreask The furnace is offered fully overhauled (all switching electrical components such as contactors etc. replaced with new parts), new sealing, electrical inspection including test logs. Inspection at our warehouse by appointment! Furnace, ovens, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h Bwjdpfoyubphox Aaask

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Bsdpfx Aajvcyf Teaowk Heating: Electric Heating capacity 100 KW

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Bjdswxxgaopfx Aaaewk You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm Bodpjp T T Hnefx Aaaswk

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m Bjdpfx Aasp T Th Heaewk total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Bodpfx Aajxfcdyoaowk Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: defective spare-parts repository (used), Stainless steel housing for a vacuum furnace with a heating chamber made of molybdenum. Chamber size: 600 mm x 600 mm x 900 mm Internal diameter of the working chamber: 1,000 mm External diameter of the working chamber: 1,280 mm External diameter of the vessel (without flange): 1,450 mm Bwjdpfjvrh Iuox Aaajk Height without wooden pallet: 1,900 mm Height with wooden pallet: 2,100 mm Width: 1,900 mm Length: 1,900 mm Weight with wooden pallet: 1,750 kg Inspection by appointment is possible at any time.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. Bwjdpfxou T N Efs Aaaok The machine is in very good condition.

Year of construction: 1990, condition: used, The machine underwent a complete overhaul by the original manufacturer in 2016. Since then, it has seen very limited use and has been stored and disconnected for several years now. Bodpfxoyaczpe Aaaewk

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace Bwodjm E Tvhepfx Aaask YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum Bjdpfx Aajn Snx Hjaowk • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Useful Dimensions : W600*D900*H900 mm Loading Capacity : 800 kg/batch Bwodpfxsvfpfzs Aaask Cooling Pressure : 10 bar (abs.) Vacuum Level : 10exp-2 mbar (manufacturer specs.) Cooling Gas : N2

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Slide Rail Track Part Entry Cart 1300 Max Temp Sublocation - Heat Treatment area. Bodex Ap N Rspfx Aaaewk

Condition: used, Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Mod. no.: PM P02 366 Comment Can only be operated with the appropriate backing pump and control system. Bwsdpfxjc Irrke Aaask Delivery time: on request

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Bodpfx Aaeym U Syjaswk Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Bsdpfx Ajym U Insaaswk Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. * Manufacturer: Henkovac Bodpfxsyudxxs Aaaowk * Model: H 1000

Condition: like new (used), Chanber size: Bwedpfx Asd Sm Dijaask 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: used, Year of construction: 2008, overall weight: 320 kg, total length: 2,200 mm, total width: 800 mm, total height: 1,360 mm, Steel frame assembly for vacuum pump system Oerlikon Leybold RUTA 2001 502260 (SCREWLINE SP630 + RUVAC WAU 2001). 2 levels including mounting holes for securing the pumps and to the floor Material: steel Colour: grey Weight: 320kg Length: 220cm Width: 80cm Height: 136cm Bsdpfx Aeyufqcsaaswk - without vacuum pumps (as shown) - with small control cabinet (as shown, without internals) - with cable duct (as shown) 4 units available Price excluding shipping (EXW) Shipping available upon request

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 30 kg, total length: 33 mm, total width: 40 mm, total height: 130 mm, operating pressure: 2 bar, final pressure: 2 bar, warranty duration: 24 months, Pneumatic Vacuum Liquid Filling Machine – Constant Fill Level This vacuum liquid filling machine operates fully pneumatically and requires no electricity. A small compressor is sufficient to operate the machine. Thanks to the vacuum-controlled constant-level filling principle, each bottle is filled to exactly the same liquid level, regardless of bottle volume variations. This ensures a consistent and professional final result. Compact, Lightweight, and Durable The machine is manufactured entirely from high-grade stainless steel, is compact in design, lightweight, and takes up little space. It is easy to place on a workbench, making it ideal for both production and testing environments. Versatile Applications Suitable for filling both small and larger volumes of liquid products, including: - Water - Perfume - Milk - Eye drops - Oils (such as sesame oil) - Beverages - Alcohol - And similar liquids Efficient Operation The machine is equipped with two filling heads, allowing for continuous operation. Depending on the operator and bottle volume, up to approximately 20 bottles per minute can be filled. Contact & Delivery For questions or further information, please feel free to contact us by email or telephone. Transport within and outside Europe is possible. Bjdpfsrivxyox Aaaewk

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. Bwedpfxeud Ryrs Aaaek - Capacity 16m3/H

Condition: new, Year of construction: 2025, Roots booster vacuum pump. Available in stock. Bwjdpfoftzmdsx Aaaek Marpa Vacuum brand pump. Pump completely new. 12 months warranty Nominal flow: 500 m3/h at 50Hz. Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us.