Air handling units with high flexibility

New - Envistar Flex – ThermoCooler HP Envistar Flex

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven. Nwsdpfx Asv Hg Euog Tjh

Year of construction: 2015, condition: ready for operation (used), A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible. Njdpfxoxrf Iuo Ag Towh

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. Nedpfsg Rgt Uox Ag Towh 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Nwjdpfjfy T H Iex Ag Teh Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 6000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts Nwjdpfx Agsfq D H Sj Tsh be available at short notice included one-year warranty

Condition: used, pressure 160 t passage width / mm stroke / mm Njdpfx Aeiulkqeg Towh Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: excellent (used), Rotary lobe pump (Roots blower) Manufacturer: Pfeiffer Nwedsdiwccopfx Ag Toh Type: Okta WKP 2000 A M Suction capacity: approx. 2065 m³/h Warranty period: 12 months

Condition: good (used), Refrigerant system Copeland with original condenser Type: D6DT5-320X-AWM/D (x4) Volume: 126.9 m3/h (x4) Cooling capacity: 220 kW at -10°C/40°C, 56.2 kW at -35°C/40°C Refrigerant: R404A With original condenser Guntner GVH 067B/2x3N Pieces in stock: 1 Condition: Used We have many other refrigeration machines. Chillers, compressors, coolers, condensers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is available on machineseeker. Nwsdpfx Aeg N Hu Sog Toh

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 600 mm, total height: 1,660 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system Nwjdpev Sybyefx Ag Tjh - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: used, Used Copeland ZR19M3E-TWD-561 scroll compressor on Freon with a sight glass. The compressor has a displacement of 42,8 m³/h. Nedpfxsrlk Ame Ag Towh