Hot water diesel 200-350bar 16-21l/min.

PTC CTR-H

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Speed 1700/3400 1/min. Fjdpfx Adjchkwhoaogi Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: refurbished (used), Year of construction: 1991, Batch mixing, approx. 100 t/h TELTOMAT mix silo with bucket elevator 4 main chambers + additional chamber (total capacity: 160 t) Fgedpfx Adstph A Njaji Screening and drying drum 2-shaft compulsory mixer 30,000 l heating oil tanks AMECO filter system 3 bitumen tanks 2 silos with screw conveyor 4-chamber dosing system

Year of construction: 2005, condition: good (used), machine/vehicle number: A5.01077.0181, Stationary high pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Fjdpjix I Ndofx Adajgi Pump type: HDP 77 Working pressure: 650 bar Delivery rate: 45 l/min. Drive speed: 1500 rpm. Driving power: 54 kW with SIEMENS electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.400x720x1.160 mm weight: approx. 800 kg Year of manufacture: 2005 Condition: In good used condition.

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. Fsdpfxjg A Rhke Adasgi • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Year of construction: 2005, condition: like new (used), functionality: fully functional, empty load weight: 1,600 kg, maximum load weight: 1,000 kg, inner dimension height: 1,200 mm, inner dimension length: 1,390 mm, inner dimension width: 1,390 mm, nominal power: 64,000 kW (87,015.68 HP), pump capacity: 500 l/min, pump pressure: 450,000 bar, water tank capacity: 800 l, machine/vehicle number: 25191, A machine for industrial cleaning of machinery and parts. It has 3 washing chambers, one main and 2 auxiliary. The technical condition of the equipment is excellent - used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main parts of the machine: Door to washing chamber (on cylinders). Upper washing nozzle Lower washing nozzle Pressure piping Control cabinet Washing pump Auxiliary pump 1 Auxiliary pump 2 Water heater (for each chamber) Drain valve Water level sensor Basket for washing elements Oil separator Fgedpforkz Stjx Adaoi Steam vent Water pressure indicators Automatic water filling and chemical dosing system In addition, we offer a reverse osmosis water filter in the set.

Condition: used, Year of construction: 2023, fuel type: diesel, power: 34 kW (46.23 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.065 kg Fgsdpfx Aetr Nknedasi Generator capacity: 45 kVA Serial number: ESF371201 Transport dimensions (LxWxH): 2.15x0.99x1.47 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2005, Bottling line AVE - 2005 Speed: 2,500 bottles/hour for sparkling wine 3,000 bottles/hour for still wine. Fgedpfx Adotr Hhveaji Depalletizer GP ENGINEERING model COMPACT 52 Isobaric filling monoblock AVE 24.24.6: Rinser with 24 clamps, single treatment - fixed nozzle Filler with 24 valves with pre-evacuation and self-leveling Corker with 6 heads for natural straight and mushroom corks. Caps orientator AVE Bottle washer/dryer CAMES model W DT 3/8 Capsuling machine ROBINO & GALANDRINO model FENIX 2, suitable for PVC and polylaminate capsules Labeller AVE adhesive and cold glue model 12T 4S 4E, suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING model ISOLA 700: Box forming machine – American box Case packer with single adjustable head Hives inserter AVE Box closing machine top and bottom hot glue AVE Palletizer GP ENGINEERING model PABR 50 Semi-automatic pallet wrapper AVE Level control FT SYSTEM model CL 100 complete with conveyor rejection system Label check FT SYSTEM model CE 300-2-CC001 complete with conveyor rejection system Carton weighing machine WEICOMP model KD/CPW S/N 83623 Inkjet printer for boxes ZANASI model Z JET 303 Conveyor for bottles and boxes existing on the line with electric control panel. Existing line formats included. Safety protections.

Year of construction: 2011, condition: excellent (used), IWN Crusader Crate / Utensil / Tunnel Washer Fgodpfsgqutcjx Adaoi Year 2011 All Stainless steel Power wash and rinse system with digital adjustable temperature controller Chemical dosing facility for wash and rinse system Gas fired burner with reset facility Complete with extractor fan and ducting In excellent working condition, ready for use.

Condition: new, Year of construction: 2025, Multitel MTE 270 on Iveco "Daily" - 3.5t truck-mounted access platform (self-propelled work platform/lifting platform) - year 2023 - NEW with warranty - Fedpfx Asq T Nycjdasgi

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm Fjdpowbvhaefx Adaegi --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg