160-210 bar 36-55 l/min high-pressure cleaner
PTC Whale

Year of construction

2025

Condition

Ex-display machine

Location

Rheda-Wiedenbrück Germany

160-210 bar 36-55 l/min high-pressure cleaner PTC Whale

Show map

Machine data

Machine type:: 160-210 bar 36-55 l/min high-pressure cleaner

Manufacturer:: PTC

Model:: Whale

Year of construction:: 2025

Condition:: as good as new (ex-display)

Operating hours:: 1 h

Price & Location

Location:: Kupferstr. 11, 33378 Rheda-Wiedenbrück, Deutschland

Call

Details about the offer

Listing ID:: A3582447

Reference number:: 1001

Update:: 03.02.2026

Description

High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frames with forklift lugs suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no finishing time & jib, Karo, Leistikow, Müller, Rioned, Rockstrah, Rom, Rowo,...

The following models are available:
Whale 36/210 | 36l/min at 210bar | Engine: Honda GX630 14,7kW
Whale 43/180 | 43l/min at 180bar | Engine: Honda GX630 14,7kW
Whale 55/160 | 55l/min at 160bar | Engine: Honda GX690 17,7kW
DIMENSIONS / WEIGHT:
dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm
empty weight without water tank : approx. 250 kg
Dimensions and empty weight with 300 l water tank: approx. 1.160x1.000x1.030 mm and approx. 280 kg
Dimensions and empty weight with 500 l water tank: approx. 1.260x1.000x1.030 mm and approx. 300 kg
HIGH PRESSURE PUMP:
Manufacturer: COMET
Model: TW 13022S Premium
MOTOR:
Manufacturer: Honda
Model: GX 690
Fuel: petrol
Cooling: Air
Cylinders: 2
Displacement: 688 cm³
Max power: 24 PS (17.7 kW)
Max engine speed: 3,600 1-min.
TRANSLATION: Gearbox
CONTROL PANEL:
ignition key
Operating hours counter
Electronic fuel gauge
LED display for low pressure of lubricating oil
Dkjdpedqmttjfx Abujh
Emergency stop button
INSTALLED ALARM:
Low-water protection against dry running of the high-pressure pump with automatic shut-off function.
SAFETY AND PRESSURE REGULATING VALVES:
The device is equipped with a safety valve, a D
[...]

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2017

64 listings online

Call

Send inquiry

Telephone & Fax

+49 5242 ... show

Fax:

These listings may also fit your interest.

Listing

Truck mounted crane Palfinger PK 23002 C, Funk

Bovenden

978 km

Truck mounted crane
PalfingerPK 23002 C, Funk

€23,900

fixed price plus VAT

Call

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: red, driver cabin: other, gearing type: other, Year of construction: 2006, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions Load diagram: 4.6m-4195kg, 6m-3091kg, 7.90m-2254kg, 10.10m-1720kg, 12.20m-1398kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dkjdpfx Asi Rp T Isbueh - .

See details

Listing

CNC turn-mill center Spinner TC 800 - 85 MCY

Oestrich-Winkel

975 km

CNC turn-mill center
SpinnerTC 800 - 85 MCY

Call

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Dedpfxoxdc Sue Abuskh Equipment: Chip conveyor Electronic handwheel

See details

Listing

30 yds Shelving 30 lfm Fachboden Schäfer verzinkt H2,5m R3000 Auflast 100 kg

Aumühle

1,430 km

30 yds Shelving
30 lfm Fachboden Schäfer verzinkt H2,5mR3000 Auflast 100 kg

€2,890

ONO plus VAT

Call

Condition: good (used), Approx. 30 running meters Schaefer R3000 shelf rack Dksdpscfhx Tefx Abueh Manufacturer: Schaefer R3000 as new, see pictures Over 300 meters available upright, galvanized, height 2,5 m, depth 40 cm Shelves, galvanized, 100 kg load/ shelf, width ca.100 cm Negotiable price: € 2.890,00 net ex stock Offer consists of: 31 pcs. uprights or frames, 2,5 m, galvanized 90 pcs. Shelves, 100 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening. 3 levels per bay (of course more levels are possible with extra charge). Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly available on request. More info on request. (Changes and errors in the technical data, specifications and prices and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas. To get to our site, please click on our logo! broom-clean business clearances company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

See details

Listing

Bandsaw - Horizontal BERG & SCHMID K-tech DG 50/33 HA-I

Germany

1,034 km

Bandsaw - Horizontal
BERG & SCHMIDK-tech DG 50/33 HA-I

Call

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I 2-column miter saw Solid, yet easy to use Material height sensor (automatic cut start detection) Smooth running thanks to bevel cut, feed controller + cutting pressure controller Massive material infeed roller Removable chip tray (disinfection) Energy-saving and low-vibration thanks to bevel cut Ergonomic, safe and free-standing control panel Frequency-controlled saw drive 15 -100 m/min. Hydraulic cutting pressure control valve Hydraulic control of saw frame and vice LEDs for monitoring all safety functions Dkodpefg E Hlofx Abush Large dimensioned wheels (520 mm) a. Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

See details

Listing

Germany

1,137 km

Welding Unit
KEMPPIPro MIG 500

Call

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg Dksdpfx Abevz Abhsush dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

See details

Listing

Steam Turbine Nadrowski Bielefeld C4DS-GVI

Germany

1,137 km

Steam Turbine
Nadrowski BielefeldC4DS-GVI

Call

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor Dedpfx Absu Nvbusuokh max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. *

See details

Listing

CHP General Electric Jenbacher JMS616 GS-N.L

London

483 km

CHP
General ElectricJenbacher JMS616 GS-N.L

Call

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Dksdpfxowptfre Abuoh Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

See details

Listing

High-pressure water jet system 1120 bar 131 l Hammelmann HDP 233

Rheda-Wiedenbrück

868 km

High-pressure water jet system 1120 bar 131 l
HammelmannHDP 233

Call

Condition: excellent (used), Year of construction: 2007, operating hours: 3,114 h, functionality: fully functional, total width: 2,500 mm, total length: 7,100 mm, total height: 2,800 mm, pressure: 1,120 bar, operating pressure: 1,120 bar, fuel: diesel, overall weight: 12,000 kg, rotational speed (max.): 2,100 rpm, water tank capacity: 1,600 l, empty load weight: 12,000 kg, power: 286 kW (388.85 HP), year of last overhaul: 2024, water pressure: 1,120 bar, pump capacity: 111 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 233 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Operating pressure: 1120 bar Flow rate: 111 l/min. Dodpfx Abewyw Dtoujkh PRESSURE STAGE 2: Operating pressure: 920 bar Flow rate: 131 l/min. Selector/diverter valve with manual switch installed. Drive speed: 2100 rpm Plunger: d30 mm Drive power: 230 kW With 286 kW Deutz BF 6M 1015 C diesel engine With workshop and changing room. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (HD pump from 2005) Operating hours: 3114 Condition: New plunger seals, fuel and oil filters. The high-pressure pump is in very good used condition.

See details

Listing

Crane truck Volvo FH 540 6x2 Euro 6 Palfinger PK 53002-SH G

HETEREN

717 km

Crane truck
VolvoFH 540 6x2 Euro 6 Palfinger PK 53002-SH G

Call

Condition: excellent (used), mileage: 295,000 km, power: 405 kW (550.65 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,200 mm, loading space width: 2,550 mm, Year of construction: 2015, operating hours: 1,828 h, Equipment: air conditioning, crane, power mirror, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Low-noise operation - Air suspension - Sun visor - Xenon lighting - Power Take-Off (PTO) - Tow hitch Dksdpfsw Rc Evsx Abueh = Further Information = Axle configuration Front axle: Steered Rear axle 1: Steered Weights Unladen weight: 18,505 kg Payload: 11,070 kg Gross vehicle weight: 29,500 kg Functional Body manufacturer: Palfinger PK 53002-SH G CE marking: yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request

See details

Listing

Mierlo

743 km

Bandsaw machine
RogiCY355 INVERTER

Call

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Dksdpfxega Tzxe Abujh Hydraulic bag cylinder Motor protection switch Automatic end stop

See details

Advertise here