Palletizer

Pulspack Paletttieranlage

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Chsdponpbhvjfx Aflef

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" Csdsquuvrepfx Afljhf 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Year of construction: 2025, condition: as good as new (ex-display), Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: Cjdpfx Afjhfc Rielshf - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Condition: good (used), Year of construction: 1992, Palletizer brand DAN, type MK11. 1992 Chedpfx Asin Ebfsfljf Until recently in use: see video. Due to company move dismantled.

Condition: used, Year of construction: 2005, Overview  The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope Worked with tray/cartons of 8 units (4x2) Pallet loader With shutter head Incl. protective fences, pallet transport, tray transport, tray turner, formation table, layer pad inserter, layer pad magazine, empty pallet magazine Cedpfjxb Ar Ajx Afljhf

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER Csdpovtpc Aefx Aflohf

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Chedpfjxftvaex Aflef -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately

Condition: used, Year of construction: 2003, operating hours: 10,002 h, Used Robot Palletizer Fanuc 2003 – The Ultimate Solution for Palletizing Operations Chjdpsvgvx Rofx Aflef Are you looking for a reliable and efficient robot palletizer for your business operations? Look no further than the 2003 Fanuc Robot Palletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and available base, this palletizer is designed specifically for palletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can develop pallets up to a height of almost 3 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) saves floor space and simplifies transportation and installation. Upgrade your palletizing operations with the 2003 Fanuc Robot Palletizer – the ultimate solution for efficient and effective palletizing. With gripping head for cardboard

Condition: good (used), Year of construction: 1981, functionality: fully functional, conveyor belt length: 6,100 mm, conveyor belt width: 600 mm, conveyor belt speed: 100 mm/s, total length: 6,100 mm, total width: 740 mm, total height: 340 mm, power: 0.25 kW (0.34 HP), input frequency: 50 Hz, Type: Conveyor belt TAF article number: 1000003874 Manufacturer: SPÄTH Year of construction: 1981 Overall dimensions: 6,100 x 740 x 340 mm (LxWxH) Width incl. side panel: 710 mm Cheek height: 100 mm Width incl. drive: 740 mm Conveyor length: 6,100 mm Conveyor width: 600 mm Belt type: PVC, smooth Belt width: 600 mm Substructure: excl. drive Drive: Centre station Motor: Gear motor Motor data: ATB, 0.25 kw, 50 Hz, 400-230 Volt Conveying speed: 0.03 - 0.1 m/s, adjustable Special features: Speed controller, CEE plug, ON/OFF switch Condition: Used / fully functional Function test: OK Cjdpfotphc Rsx Aflehf

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 460-102150, overall weight: 960 kg, load capacity: 110 kg, arm reach: 2,400 mm, warranty duration: 6 months, Equipment: documentation/manual, For sale: brand new industrial palletizing robot. The robot is factory-new, unused, and has never been removed from its original packaging. Available immediately as it comes from an unrealized project. This is an excellent opportunity for companies seeking an efficient and reliable automation solution for their processes. Warranty: Covered by the full manufacturer’s warranty until the end of 2025. Availability: Immediate Note: The main photo is for illustration purposes. We are selling a robot packed on a pallet in its original packaging, see subsequent photos. Equipment includes: MANIPULATOR 435-107 Variant: IRB 460-110/2.4 209-202 Manipulator colour: ABB Graphite White std 287-4 Protection: Standard 803-1 Media & Communication: Parallel & Air 431-1 Connector kits Upper arm: Upper arm 239-1 Connector kits On foot: On foot 1999-1 Standard calibration method: Axis Calibration BASIC 700-3 Controller variants: Single cabinet 129-1 EC Machinery Directive: Prepared for CE and China 769-2 Mains voltage: 3x400V 752-2 Mains connection type: 6HSB 6p+PE 742-1 Mains switch: Rotary switch 708-1 Room temperature: Max 45°C 741-1 Cabinet connector protection: Connector cover 438-1 Warranty: Standard Warranty FLOOR CABLES 210-2 Manipulator cable – Length: 7 m Chedjw Nn Imspfx Afljf CONTROL MODULE 701-1 FlexPendant: FlexPendant 10 m 888-3 PROFINET IO: PROFINET IO slave SW 731-1 Safety interface: Safety internal connection 733-1 Operator panel: Panel on cabinet 735-1 Operating mode selector: Key switch, 3 modes ROBOTWARE 685-2 RobotWare Version: RW 6 608-1 World Zones: World Zones 611-1 Path Recovery: Path Recovery 613-1 Collision Detection: Collision Detection 617-1 FlexPendant Interface: FlexPendant Interface 623-1 Multitasking: Multitasking 824-1 MultiFunction: MultiFunction