Heavy duty shelf

ROSS IT

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Dedjuwrv Dspfx Apwsut

Condition: new, Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Duedouu H Alepfx Apwst Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 500 kg

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min Dedpfx Aob U Hwpjpwsut ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Dodoyh Nfuepfx Apwout Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) Duedpfx Apsxdl Raswot - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Djdek Abbbjpfx Apwsut Installation in a hall Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- Djdpfohpktvox Apwout The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Dedsgbfaxspfx Apwjut Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the usual laser printers - also coloured prints on glass, wood, textiles, plastic, metal and many other materialsNew model: PS1015C M Y K LC LM WhiteDruckkopf: Epson TX8002690 dpi max.inclusive software for printer and image processingDimensions: 2.30*1.98*1.34mWeight: 650kg360 degrees Use: Bottles/round objects (surcharge)A1 Size 100x150cm and 70mm print height possible7x500ml Colour can be supplied! (surcharge) LACK FUNCTION POSSIBLE Software adjustment and printer explanation on request. Germany/Europe-wide. (Surcharge)Print videos etc. can be sent by Mail/WhatsApp... Dsdpfx Asd Ew A Uspwjut

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Dodpfjvbcxtjx Apwjut Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available