Hook lift truck

Scania R560 TAM Retarder Euro5

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Rjdpfx Aholtinwe Usck Machine weight 29 to Press box aperture1,9 x 0,95 mxm Place: Germany Available immediately

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Rsdpfsxddvnex Ah Ueck Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Rjdelhqd Repfx Ah Ujck Machine weight 16 to Place: Austria Aviable: 30.01.2025

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net Rcsdpsff Sbisfx Ah Usk *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2023, condition: new, machine/vehicle number: 6YXXX23, SINC FEROX is the must have machine in scrap business, to reduce the volume or to prepare scrap for baling or just to get it in to size for melting. FREOX alligator shears are available from 300mm up to 1000mm cutting size, as longer the cutting blade, as higher the cutting force. The machines are able to operate with pedal, semi-automatic and full-automatic. The option to set the cutting opening is easy solved with the manual limitation. Rcsdpsmqku Ujfx Ah Usk The machines are designed for to have minimal service needs; the blades are reversible to be reused on all four edges.

Condition: excellent (used), Year of construction: 2008, Horizontal conveyor belt URBAN - TBA26/38 HQR 7 pieces for sale Rodjtr Eqfjpfx Ah Ujck Sale also possible individually

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Rcjdpfxomqi Ako Ah Uek

Condition: excellent (used), Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, Scissors. Guillotine. Set consisting of 2 pieces. Approx. 5000 hours (to confirm). For cutting: Textiles, foil, PP strips, non-woven fabrics, fishing nets and ropes, big bags, etc. Several videos on request. Working width 600 mm Total width 1470 mm Total length 4590 mm Cutting width 600 mm Cutting speed 220 rpm Installed power 22.5 kW Capacity 1000 - 3000 kg/h Net weight 3200 kg Cutting sizes 5 - 36 mm The guillotines are a 2-piece set, set in letters L, and can only be sold as such. The 2 machines are equipped with LCD touch control panels on which several languages are installed: English, German, Polish. The total power installed in the machine is 22.5 kW. Redpetq Uc Nefx Ah Ujck Operating instructions - English. The video here presents the same machine and does not belong to us. More, our videos are available on your request.

Condition: good (used), mileage: 605,608 km, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,700 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, Year of construction: 2015, Equipment: air conditioning, cruise control, navigation system, parking heater, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Speed limiter - Refrigerator - Air suspension - Reversing camera - Sun visor - Auxiliary heater / Parking heater - Power take-off (PTO) - Power take-off (PTO) - Towing hitch Rcodpfx Ajw H A Nbjh Usk = Further Information = General Information Year of manufacture: Feb. 2015 Drivetrain AdBlue system: Yes Axle Configuration Front axle: Max. axle load: 8,600 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Max. axle load: 11,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 18,525 kg Payload: 9,075 kg Gross vehicle weight (GVW): 27,600 kg Functional Mast: Articulated boom Crane: Yes Body brand: Palfinger PK 41002 -EH-E CE marking: Yes Condition Technical condition: good Visual condition: average Financial Information Price: On request Further Information Contact John de Koning or Mark de Koning for more information.

Condition: used, mileage: 820,000 km, Year of construction: 2005, Serial number: YS2P6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21454 Specifications: Rcedpfx Asxg Abnoh Usk EU-approved until 30.07.2026 2005 model Approx. 820,000 km Manual gearbox Tires (see pictures) 20T hooklift Palfinger 23 t/m crane from 1999 Support legs Length: 900 cm Width: 250 cm Wheelbase: 490 / 134 cm Curb weight: 15,550 kg 6x2 340 hp Rotating warning bar Tow hitch Rearview camera Radio/CD Air conditioning Description:Scania P340 hooklift/crane truck from 2005.Equipped with a Palfinger 23 t/m crane from 1999. The main cylinder has a leak.Flatbed and container can be included at an additional cost.Service history available.Available for prompt delivery. Km: 820000 HK: 340 Technical approved: Yes EU-approved until: 30.07.2026 Own weight: 15550 Total Weight: 29000 Payload: 13375 Width: 250 Length: 900 Euro: 3 Model: P340 Krok/kranbil 23 t/m Palfinger kran Gearbox: Manual