Stacking box

Schäfer 9000 St. SSI Schäfer Kunststoffkiste EF4

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Fsdpfefi Tmcex Aflsgk

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fsdpfxjvmz N Uj Aflsgk Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Fedpfx Ajk S Rpujflogk

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm Fgjdpfx Afogv I Unslok spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. Fodpfsfrlndsx Aflegk 200 mm longer column 14154

Condition: new, Year of construction: 2025, RLA 400 VIBER Power 11300 m3 Capacity ~ 11,300 m3/h Motor power 11 kW / 15 HP Rotation speed 3000 rpm Suction speed 32 m/s Diameter of the extraction spigot 355 mm Polyester filter material Fodpjlkd Tfsfx Aflsgk Filter permeability 5 microns Filter size 160 x 935 mm Number of filters 58 Chip container size 500 x 500 x 600 mm - 3 pieces Voltage 380V Dimensions 1000 x 3000 x 2300 mm Weight 630 kg Sound level 85 dB unconnected / 70 dB connected + 850 euros for the models with fire extinguisher (Safe System) + 1350 euros for the models with inverter (speed control)

Condition: used, Year of construction: 1995, operating hours: 1,589 h, machine/vehicle number: 558B, Equipment: all wheel drive, - Wunderschoner Liebherr shovel loader is in a really good condition directly from the military (Swiss-Army) Well maintained and cared for, - The 508 is a really solidly built wheel loader, just right quality for the military. - Is also no source of oil, makes NO oil stains, is almost as good as new - The cab is glazed all around for a good all-round view! ! - The Liebherr L508 is equipped with: Quick change device 0,8m? Bucket, Pallet forks with log push, Additional hydraulic connections for additional equipment, All-wheel drive, Articulated steering 40 degrees very maneuverable with a small turning circle - Tire size 12.5 R 20 off-road profile, tires are foamed (you can not drive flat) Snow chains are also included, Hydro drive, Highest speed 25 Km / H, Displacement 2732 cm? 4 cylinder series Deutz BF4L1011 T with Turb,24Volt power supply, - TUV can be made NEW on request for an extra charge !!! - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Call 0049 (0)2248 Greetings, your Philipp from the Hanfbach valley Fedpfxoqx S Als Aflegk

Condition: new, pressure 8,5 kN stroke 40 mm Fsdpfx Afofv Awaolsgk throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Year of construction: 2024, operating hours: 37 h, load capacity: 200 kg, lifting height: 10,000 mm, empty load weight: 2,680 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,800 mm, drive type: Elektro, construction width: 1,000 mm, working height: 10,000 mm, Vertical lift platform Front tyre size: 16x5 Rear tyre size: 16x5 Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Haulotte Fedovymbijpfx Afljgk

Condition: new, MAXION BT 20 Bench drill Powerful MK2 machine with easy-scroll control wheel and large display. Digital drilling depth, piece counter, drill depth fine adjustment and LED light are already part of the standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical data: Normal drilling capacity 20 mm Tapping capacity M 16 Spindle MK 2 drilling depth 100 mm throat 215 mm distance spindle/base plate 185 - 541 mm table surface 340 x 445 mm T-slot width 12 mm column diameter 90 mm total height 990 mm weight 120 kg Motor pole-changing 0,6/1,2 kW Mains connection 400 V/50 Hz Two spindle speeds possible: MAXION BT 20 (M00027) Spindle speeds infinitely variable 100 - 1,800 min-1 MAXION BT 20 (M00028) Spindle speeds infinitely variable 240 - 3,600 min-1 Optional accessories Drilling package Tapping device with digital depth display 200 mm longer column Cross table MF3 Fedpfx Afjf Nrbfeljgk base cabinet electric cooling device Note: ALSO AVAILABLE AS A COLUMN PIPE MACHINE