Storage tank for heating oil or diesel

Schneider Tankbau 50m³ Lagerbehälter nach EN 12285-2

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act. Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for storing liquid fertilizers as follows: The storage tank is equipped with a brand-new plastic inner liner on the inside, which is resistant to storing liquid fertilizers. An acoustic leak warning device is mounted outside in a protective box (lockable). The storage tank additionally has a double-walled steel construction. The plastic inner liner has a general building inspection approval. It is therefore suitable and approved for storing liquid fertilizer AHL as well as NOX reduction agent AUS32 AdBlue. Nominal capacity: 50 cubic meters Quantity: 1 Used, but fully overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL paint; however, you can also specify your own color preferences at any time. Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Rcjdpfxoc Nk Eno Abueh Quantity: 1 filling nozzle, 3 inches, V2a stainless steel, newly installed Quantity: 1 new acoustic leak warning device for the double wall Quantity: 1 ladder Quantity: 1 suction line, 3 inches, V2A stainless steel, newly installed Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 10,900 mm Diameter approx. 2,500 mm Weight approx. 9,000 kg Storage: Above-ground Excellent offer. Liquid fertilizer - AHL tank systems in sizes from 5,000 to 100,000 liters. Water tanks, fire water tanks. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer a cost-effective delivery upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please do not hesitate to call us. One of our experienced employees will be happy to advise you. Price/Shipping The price for the tank system applies ex works Warstein, unloaded free of charge. Delivery can be offered at a reasonable price for an additional fee. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. Rcodpfex Adbnex Abueh without accessories! *

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR210 R3100 ultra KRC4, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR210 R3100 ultra Controller: KRC4 Rated Payload: 210 kg Reach: 3095 mm General purpose: For heavy payloads and much more. Delivery time: To be agreed upon. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash), especially useful for 3D applications such as 3D milling, 3D printing, and 3D trimming. About: Rcedpfx Abjxxamloueh Our daily business is the reliable supply of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Condition: good (used), total length undivided: 3000 mm Rjdpfehwwfxox Abuech edge heigth: 90 x 90 mm

Condition: used, mileage: 93,103 km, power: 70 kW (95.17 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 2,570 kg, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2014, construction height: 2,700 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 offers a reliable transport solution with a robust box body. This used model, first registered in October 2014, has a mileage of 93,103 km. Powered by a 2,143 cc diesel engine with an output of 70 kW (95 hp), the Sprinter is equipped with an automatic transmission and rear-wheel drive. With an average combined fuel consumption of 9.8 l/100 km, it complies with the Euro 5 emissions standard. The Sprinter is characterized by its spacious design, with dimensions of 7,057 mm in length, 2,100 mm in width, and 2,700 mm in height, a wheelbase of 4,325 mm, and a permissible gross vehicle weight of 3,500 kg. It is painted yellow and has two doors and seats. Additional features include a camera system and storage modules in the trunk, making it perfect for commercial use. Rcjdpfjuillgjx Abueh The Category 4 (Green) environmental sticker allows access to low-emission zones. Viewings are possible without prior appointment, and a registration service is also offered. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Rsdpfx Aji Enxdobusch Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 60 m³ / 60,000 l fire water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, material S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked or driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, seal and screws. New or used, immediately available! The container has been emptied, cleaned, overhauled and tested for tightness by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in form B without a level gauge - Ventilation flange stub in DN 100 with cap with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with a bitumen coating for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or an epoxy resin internal coating (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery location, and you will immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de Rjdpfx Ajhh Sruebuech We can also accept and purchase tanks/containers of all kinds, simply contact us. We also have these types of tanks constantly in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00 Redpfed Ehh Rex Abujch

Condition: like new (used), Cutter Manufacturer: Kilia Stainless steel Rodpfx Aoxrtyxjbujch Capacity of the bowl: 50 liters 6 knives

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR125 Ricardo Motor Newpower generator generator set Continuous power: 110 kVA / 88 kW Maximum power: 120 kVA / 96 kW Engine : Kofo RIcardo R6105ZLDS, 6 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3030x1130x1510 mm Weight: approx. 1619kg Diesel tank: 125 L At 100% load: approx. 23.2 L/h At 75% load: approx. 17.5 L/h At 50% load: approx. 11.8 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Rjdpfx Ajmga Svobusch 250A automatic switch : € 1080 Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address