Double-sided cantilever rack

SIPAG Doppelseitiges Kragarmregal 10 Ständer

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) Rsdjv Tpxqspfx Abgow -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Rodpeucfwpofx Abgjw

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Rsdpeh In Thofx Abgjw Speed -80' m/min. Reconstruction- 2022

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Rsdpfsdy Hm Dsx Abgsw Machine stand

Condition: new, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 Redpfx Aef Ddzqsbgow 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1, 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2- M929 M1256 664P118-056-017-R-A2- M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF and other types, as one package

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, type of input current: AC, Machinge is in perfect working shape. It is very quick machine, pick-up was remanufactured. Selling due to retirement in the future. The remaining machines, complete equipment will also be for sale in the future. Three cnc machines, two forklifts, etc... Rjdpjnyiyajfx Abgjw Not all items are in the pictures because there is a limit of 15 photos. Contact for photos.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg Rodpfx Aoh Ek Dajbgsw - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Redpfsuiy Ngox Abgjw Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: new, 50 linear meters of Jungheinrich MPB pallet racking, new New, see pictures. Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beams with load capacity per bay: 3000 kg Negotiable price: €12,750 net, ex warehouse The offer includes: + 19 units of pre-assembled frames, depth 110 cm, height 9 m + 144 units of beams, length 2.7 m, 3000 kg load capacity per bay + 288 units of locking devices + 78 units of concrete anchors Load capacity signs, documents, etc. are included. Further accessories can be found in the accessories catalog. Frames are blue, infill panels are galvanized. Heights from 3.5 m to 9 m are in stock. Bay load: 12 tons. Beams are yellow. Goods are in stock. Transport and assembly are possible upon request. Inspection is possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Rodslp Ntgopfx Abgjw Purchase / Sale: We are constantly looking for and offering numerous items from various areas: - Complete liquidation of business premises - Business closures - Fast, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Please send us a few keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Designed for bundle cutting of roller shutter slats, setwise cutting of roller shutter boxes, cutting of side rails and set cutting of monoblock roller shutter boxes. • Clean surface cutting thanks to high saw speed • Roller conveyor system, right and left 3 meters each, 2 units • Saw cutting speed is adjustable • All roller shutter boxes up to a maximum of 350 mm can be cut • Precise cutting thanks to the linear guide system • Saw blade diameter Ø550 mm OPTIONAL • Cooling system Redpfx Ajramzfobgjw • Capability to operate with digital meter