Heavy Forklift - Diesel

SMV 20-1200C

Condition: used, machine/vehicle number: M11643*18226, Year of construction: 2018, operating hours: 17,465 h, load capacity: 20,000 kg, lifting height: 6,500 mm, free lift: 3,250 mm, mast type: duplex, construction height: 5,060 mm, power: 185 kW (251.53 HP), empty load weight: 38,500 kg, drive type: Diesel, construction width: 3,000 mm, Empty container stacker Psdpfxouh A R Ds Ah Usrf Fahrgestellnummer: M11643*18226 Load center: 1200 ISO class: Terminal West Mast type: Duplex Transmission: ZF-WG191 Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Size: 14.00-24 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 14.00-24 Rear tires Condition: 20 - 40% Description: Headspreader Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, heating, full cab, central lubrication Camera ELME 508 Headspreader movable cabin ( Forx 2,40 m available )

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 1 pc 1000kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1/Dyn5/Dyn11, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Pjdpfx Ahel Tm Uvs Usrf

Condition: used, Technical details: Prjdsu Ix H Dopfx Ah Ujf table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb Prsdpfx Ajnq Di Tsh Usf All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 Prodod Tnbhspfx Ah Uof

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Podpfx Ahexlkq Uj Usrf Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Year of construction: 2009, condition: reconditioned (used), 100t turning roll, rollerbed workpiece diameter 500mm-7.500mm speed 130-1.250mm/min availible for renting Predpjmk Iktjfx Ah Uof

Year of construction: 2013, operating hours: 960 h, condition: used, machine/vehicle number: Technical name AVN2000AB-2525PR-078250, Please check the below attached pdf. document for the full detailed description of the machine. For additional fotos and information please don't hesitate to contact us. Purchase 1 AVN2000AB Tunnelling Machine Mixed Ground Cutting Wheel The mixed ground cutting wheel is designed for AVN2000AB in mixed ground such as: mixture of soft ground, gravel or coarse gravel, weathered/soft rock. Supplied with soft ground cutting tools & disc cutters. Full set of cutting tools bolts and cutting wheel bolts included. Maximum Unconfined Compressive Strength (UCS ) 60 MPa Closed face type Cutting diameter 2 575 mm Cutting tools Chisel 12 No Chisel width 100 mm Scraper 8 No Cutting disc 11 No Cutting disc diameter 305 mm Tooling system backloading Machine AVN2000AB Articulated shield with face support / excavated material transportation by slurry. Slurry feed by 6 nozzles into crusher / excavation chamber and 2 nozzles to area Prsdpfx Ajlkdl Aeh Ujf around slurry discharge pipe. All nozzles (crusher/excavation) are equipped with interchangeable nozzles inserts for different nozzle diameters to run in medium pressure mode. Integral conical stone crusher behind cutting wheel. Face access for cutter inspection / change. Optional easily fitted cutting wheels for soft ground, mixed soil conditions with some rock and full rock conditions. Central drive unit with splinted shaft for reliable, heavy duty torque transmission to cutting wheel.

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Podpfxsw Aw Tas Ah Uorf Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: used, Year of construction: 2000, operating hours: 144,381 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an injection molding machine of the Arburg brand and type 520 C 2000-675 Technical data Year of construction: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Prjdou Uuakspfx Ah Uof Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website