Diesel Forklifts

Still R70-35

Condition: ready for operation (used), Year of construction: 1989, A Still diesel forklift is available. Payload: 3500kg, max. gross weight: 10000kg, load center: 500mm, load distance: 510mm, engine: Mercedes-Benz OM617, displacement: 3m³, engine power: 46.5kW, wheelbase: 1950mm, mast: duplex, lift height: 3320mm, machine dimensions X/Y/Z: approx. 3950mm/1350mm/2400mm, weight: approx. 5450kg. An on-site inspection is possible. Bedpfxozk Nalo Ab Dowt

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm Bwsdpstvf Htsfx Ab Dst - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: used, machine/vehicle number: 70410188, Year of construction: 1991, fuel type: diesel, weight max. in kg:3500 kg stroke:3300 mm fork length:2400 mm width of fork carrier plate:1300 mm height over floor:2350 mm weight:5799 kg :10020 kg :9140 kg Bodpfx Abjcxxv Rs Dowt :3000 kg weight of the machine ca.:5,8 t dimensions of the machine ca.:4,70 x 1,36 x 2,36 m :2,25 x 1,36 x 2,36 m equipped with safety glass front and back, opening rear panel, windscreen wipers front and back, reversing light, brake lights, indicators front and back, front lights, adjustable seat, safety belt, hand brake, tank gauge, engine-hour display, solid-rubber tyres

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,254 h, load capacity: 3,500 kg, lifting height: 3,500 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: mono, construction height: 2,500 mm, motor manufacturer: Deutz, fork length: 1,200 mm, empty load weight: 6,100 kg, Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, Still H 35 T - ex German Army (Bundeswehr) Manufactured in Germany. Good condition, technically sound and ready for operation. Operating hours have been read off. Bwsdsyrdwvopfx Ab Dst 13,254 operating hours Full cab Exterior mirrors Heater STVO-compliant lighting 2 rear work lights Standard mast Lifting height: 3,500 mm Overall height: 2,500 mm Free lift: 150 mm Integrated side shifter Forks: 1,200 x 125 x 45 mm - N E W - Forks: 1,200 mm 3rd valve SE tyres Front tyres 80% Rear tyres 80% Technical specifications subject to error. Sale takes place without warranty.

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Bjdpfxsxx A D Ts Ab Dowt

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Bwsdpfepkyn Rjx Ab Det Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: Bwedpjd I R E Nofx Ab Djt • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), All parts are for sale, complet. Bwodehi Tvbjpfx Ab Dst

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Bedpsy Iwlaofx Ab Dowt Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Bjdpfswwt Nmox Ab Dowt Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons 3826ä