Diesel Forklift

SveTruck 25120-42

Condition: good (used), machine/vehicle number: 2965, Year of construction: 1992, load capacity: 25,000 kg, lifting height: 6,500 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 7,400 mm, total width: 3,150 mm, operation weight: 36,500 kg, additional equipment features: Dual tread, Equipment: lighting, SveTruck 25120-42 from Uniktruck Wheel type – Drive wheel: Pneumatic Podpfsyuh Ahex Adljpr Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 14.00-24 Wheel size – Steering wheel: 14.00-24

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • tool holder HSK63 • has a capacity for 155 tools with HSK63 mounts • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz Ppedpfsx Nkp Usx Adlsr • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L • Machine Status / Usage • Spindle hours: 12 000 Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Licence options: ShopMill Sinumerik 5-axis milling 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: good (used), machine/vehicle number: 1079, Year of construction: 1999, load capacity: 25,000 kg, lifting height: 7,140 mm, mast type: duplex, fork carriage width: 245 mm, fork length: 2,400 mm, total length: 6,300 mm, total width: 3,050 mm, operation weight: 36,400 kg, additional equipment features: Dual tread, Equipment: lighting, SveTruck 25120-42 from Uniktruck Wheel type – Drive wheel: Wheel type – Steering wheel: Pneumatic Ppjdeyuhgaopfx Adljr Wheel size – Drive wheel: 14.00-24 Wheel size – Steering wheel: 14.00-24

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 18,421 h, load capacity: 25,000 kg, lifting height: 3,860 mm, free lift: 1,840 mm, fuel type: diesel, mast type: duplex, construction height: 3,725 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - Diesel Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Description: Camera, total height 4000 mm (including air conditioning cooler), width 3050 mm, length 6000 mm (without forks), forks 2400 mm Ppodpfx Adsxz It Eoljr Sideshift, fork positioner, 3rd valve, 4th valve, air conditioning, scale,

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Pedpfx Aexizdaodlepr Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 520 h, load capacity: 25,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,930 mm, power: 210 kW (285.52 HP), fork carriage width: 3,100 mm, fork length: 2,400 mm, empty load weight: 36,400 kg, total length: 6,145 mm, drive type: Diesel, construction width: 3,100 mm, Diesel forklift Ppodpfeynpbxox Adler Load center: 1200 mm Fork width: 250 mm Fork thickness: 110 mm ISO class: Terminal West Mast type: Standard Transmission: ZF 4WG210V Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: 14.00-24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 14.00-24 Rear tires condition: 80 - 100% Description: Rental unit Side shifter, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, front windshield, heater, full cabin, air conditioning, CE certificate, twin tires, interior mirror, exterior mirrors, wipers, seat heating, LED, seat,

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Pjdpfx Ajwu Rgqedlopr Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Year of construction: 2019, condition: ready for operation (used), A Klaaßen CNC heavy machining center is available. Turning diameter: 1500mm, center distance: 4500mm, chuck diameter: 1000mm, through-hole: 190mm, travel Y: 340mm. Machine dimensions X/Y/Z: approx. 7800mm/2900mm/2200mm, total machine weight: approx. 40000kg, control: Siemens Sinumerik 840D sl with ShopTurn, operating hours: 3092h. Including extensive accessories. Documentation available. On-site inspection is possible. Pedswkuzdepfx Adlepr

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 6 Movement Y-Axis Movement ±31 mm Y-Axis Rapid Traverse 6 m/min B-Axis Movement 525 mm B-Axis Rapid Traverse 40 m/min C-Axis Rapid Traverse 600 rpm Ppedpfx Adex D Rqxoljr This 6-axis NAKAMURA WT-100 was manufactured in 2019 and features dual spindles with a speed of 6,000 rpm and a motor power of 11/7.5 kW each. It boasts a bar capacity of Ø42 mm and a maximum turning diameter of Ø190 mm. The machine includes a dodecagonal drum turret with 24 indexing positions and rapid traverse rates up to 40 m/min. If you are looking to get high-quality turning capabilities, consider the NAKAMURA WT-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours, Ppedpfx Adsyctf Dsler