Pallet Wrapping Machine

TechnoWrap B170

Condition: reconditioned (used), Year of construction: 2003, Cyklop XZE-311 strapping press Year of construction: 2003 Passage width: max. 2200 mm Nodpetqpadefx Ab Esdd Passage height: max. 2200 mm Belt guiding distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strap tensioning force of the strapping unit: adjustable up to 2000 N Pressing force: adjustable from 5 to 48 kN

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Ndedpfx Abju Umcqs Ejd Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Year of construction: 2023, condition: new, Damatt brand Model: CA-30 Year of manufacture: Unused, 2023 Serial number: On request Nodpfjltmdfsx Ab Eedd Capacity (KvA) 37,5 prime / 41 standby Capacity (Kw) 30 prime / 33 standby Engine model K4100D Fuel Diesel Alternator model STC-30 Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 54,1 Dimensions LxWxH (mm) 2200 x 850 x 1120 Weight (Kg) ca 730 Number of pieces in stock 15 Made in China Comments Unused soundproofed diesel generator, Wisdongen genset controller

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Ndsdpswp Rqfefx Ab Ejd The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 2 identical machines available, year of manufacture 2021. The machines were only operated for a short period in test mode in a large warehouse, then professionally dismantled and stored. Therefore, they remain in very good, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to vertically strap a high volume of pallets of varying sizes with PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. - For PP and PET strapping - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirement - Easy access to all mechanical components Njdpfx Ajw Htz Isb Ejdd - Simple operation via touch screen The machines have been properly dismantled and stored – they are available immediately. Additionally, 90 brand-new rolls of original Cyklop strapping material, still sealed in their original packaging, are also optionally available.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, Automatic strapping machine in very good condition. Nsdpfjuaxgxex Ab Ejdd Has been part of a larger system, but is not used. Only Strapex for sale.

Condition: used, Year of construction: 2019, Overview   The fully automatic shrink hood applicator MSK381 was manufactured by the German OEM in 2019. It was used in a German mineral water company for the packaging of PET bottles in shrink trays on euro pallet and dd/half pallet. The machine is still in production and can be visited in operation.  Technical Details   Capacity  60 pallets / h (Euro)  92 pallets / h (DD)  Formats  Euro Pallet  DD Pallet  Scope of delivery  Control panel – HMI  Conveyors according to layout  Hood station   Shrinking frame with gas burners  Nsdpfx Absr R Rd Ij Eodd

Year of construction: 2019, condition: refurbished (used), Raptor of the company Pamminger model 2350 DBS machine was in use for 1 year incl. lifting station (blue) and if required with driven roller conveyor. Cover sheet function Nsdpjic U Eksfx Ab Eodd Set program with corner edges.

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible Ndedpfx Aetq Dzhob Esd

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Very good condition. Nsdpoxbpyyefx Ab Ejdd