Electric 4-wheel forklift

Toyota 8 FBM 20 T / 1.240 h!

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Depth (mm): 2450 Gbjdpfeynbfvex Ag Hsk Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min Gsdpfx Agjww Adte Hjbk e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Godpfx Aov Ed Ukeg Hebk Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm - Cut-off length: 5 - 9999 mm - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm Gbedpfxewybkde Ag Hjk - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm - Weight: approx. 4500 kg CNC control: Speed / Power Material / Cross-section Parallelism display Automatic parameter correction

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Gbedpfsywd Ndox Ag Hek Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch Gbodpfexaa N Nox Ag Hek - Operation manual * Machine link : ?machineno=1008-9397088