Cantilever rack 1-sided

unbekannt** Höhe 2000 mm Nutztiefe 1060/850/650 mm

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: Ijdpjqt Dmyefx Adiea 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, 9 St. range L-W-H 1,36 x 0,46 x 0,95 mm weight 115 kg Drawer cabinet Dimensions of drawer 1 124.5 x 40 x 10 cm (W x D x H) Ijdsu Imqkepfx Adisa Dimensions of drawers 2 to 5 56.5 x 40 x 6 cm (W x D x H) Dimensions of drawer 6 56.5 x 40 x 14 cm (W x D x H) Dimensions of drawers 7 and 8 31 x 37 x 53 cm (W x D x H) Thickness of worktop 4 cm External dimensions of stacking boxes 10.5 x 13.5 x 7.5 cm (W x D x H) External dimensions of waste bin 25.5 x 32 x 38 cm (W x D x H)

Condition: new, engine output 5 kW Isdpfx Adswli Nrsija saw-blade dia. 300-350 mm Working speed 0-40 m/min weight ca. 1.300 – 1.800 kg kg

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Ijdpenwmwvjfx Adija German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Speeds infinitely variable via potentiometer 80-2010 rpm automatic feed 0,1--0,2--0,3 Digital speed display Coolant pump Ijdpfxsrfxqlj Adioa Thread cutting function with foot switch working light Pinol stroke 150mm throat depth 300mm Mounting MK 4 Röhm Supra 3-16mm drill chuck Table clamping surface 330x320mm Height of the machine 1930mm Weight approx. 350kg 3KW power 380 Volt

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser Iedpfxexdl N As Adioa ----- Technical Data ----- Cutting length: 3,200 mm, Cutting width: 1,300 mm, Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: - complete basic inspection - complete basic cleaning - electrics checked - immediately operational

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min Ijdjxablxjpfx Adioa voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Ioden Smvhopfx Adiea Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Condition: excellent (used), Year of construction: 2013, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack --Manufacturer: Bito,Cantilever rack one-sided, 3 bays type S height 3220 mm Iodpfxotpdm Io Adija -Stands: 4 pieces 3220/750/75 mm grid 60 mm adjustable -Cantilever arms: 28 pieces 630/40/120 mm usable depth 600 mm -Load capacity level: 1600 kg -Transport dimensions: 3220/800/H360 mm -Total weight: 350 kg

Condition: used, Three-phase motor, electric motor -Power: 7.5 kW Ijdpfochbv Tjx Adiea -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 490/322/H300 mm -Weight: 77 kg