Hydraulic cylinder

unbekannt Hub 185 mm

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 185 mm -Piston rod: Ø 20 mm / thread Ø20 x 178 mm -Cylinder: outside Ø 65 mm Lsdpfjgu Exaex Anxeag -Dimensions: 470/110/65 mm -Weight: 4.4 kg

Condition: new, Year of construction: 2026, Yanigav Circular Saw SC600E / SC600M • Drive: Electric single-phase motor 3.1kW / Gasoline engine • Saw blade diameter: 60cm / 60cm • Saw blade bore: 30mm • Tooth depth: 28cm / 28cm • Rotation: 1450 rpm • Weight: 90kg / 100kg Laodpfx Aner D Nkpsxog Price: €1395 / €1615

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology Lsdpfx Anjvxtcqsxoag The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Laedpfoztz Hcox Anxsg

Condition: new, functionality: fully functional, Year of construction: 2026, Dust Extraction System for Cabinet Sandblasting Machines The dust extraction system for cabinet sandblasting machines is a specialised extraction unit designed to improve visibility, cleanliness, and workplace safety during abrasive blasting operations. Equipped with a built-in 1100 W motor and an efficient filtration system, the unit ensures effective removal of contaminants from the working area. It is an essential component of every sandblasting cabinet, especially when used intensively in industrial environments. Main Advantages of the Machine 1100 W motor – provides high extraction performance while maintaining the unit's compact dimensions. Capacity of 3 m³/min – effectively removes dust and improves visibility inside the cabinet during operation. High-efficiency filter – captures fine dust particles, helping to protect the operator's health and improve the quality of the working environment. Stable construction – designed for operation with large sandblasting cabinets. Compact dimensions – allow easy installation near the cabinet, even where space is limited. Construction and Technology The extractor is equipped with an efficient 230 V/50 Hz electric motor that generates a stable extraction airflow, essential during intensive sandblasting operations. The unit's housing is made of durable materials resistant to industrial conditions. The 310 x 170 mm filter effectively captures even fine dust particles, preventing them from being re-suspended in the air. The 52 mm inlet diameter ensures compatibility with most sandblasting cabinets. Precision and Work Efficiency Thanks to its high-efficiency filtration system, the extractor eliminates excessive dust accumulation inside the cabinet, which directly improves the precision of the abrasive blasting process. Improved visibility allows for more accurate cleaning of components and reduces processing time. Reducing the amount of airborne dust also helps extend the service life of other cabinet components, such as lighting systems and door seals. Applications Laedpjrh E Azsfx Anxjg The unit is recommended for use with sandblasting cabinets featuring a large working area, where significant amounts of dust are generated. It is suitable for repair workshops, metalworking shops, and industrial production facilities where regular sandblasting requires clean air to be maintained. The extractor is compatible with most cabinet sandblasting machine models; however, attention should be paid to the different mounting-hole spacing used on the KDP200, KDP200TOP, and KDP220TOP models. Standard Equipment Integrated 230 V electric motor High-efficiency filtration system Housing with wall-mounting bracket 52 mm diameter inlet Technical Specifications Specification Value Extraction power 1100 W Capacity 3 m³/min Power supply 230 V / 50 Hz Noise level 85 dB Inlet diameter 52 mm Handle length 280 mm Extractor dimensions (height × diameter) 730 × 260 mm Filter dimensions (height × diameter) 310 × 170 mm Weight 9.5 kg

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector -Manufacturer: Merlin Gerin, switch disconnector type Selpact -Current strength: 1600 A Lasdpfsfubw Sox Anxog -Voltage: 660 V/50/60 Hz -Dimensions: 395/340/H435 mm -Weight. 54 kg

Condition: good (used), Year of construction: 1993, functionality: fully functional, operating hours: 7,120 h, cutting height (max.): 100 mm, cutting width (max.): 4,500 mm, saw blade diameter: 400 mm, overall weight: 3,000 kg, cutting length (max.): 4,500 mm, cutting height with scoring (max.): 100 mm, cutting width at rip fence: 3,200 mm, main saw diameter: 400 mm, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Lsdpfxovvhfho Anxjag

Condition: excellent (used), Year of construction: 2015, operating hours: 775 h, functionality: fully functional, working width: 1,000 mm, area performance: 6,000 m²/h, warranty duration: 12 months, tank capacity: 250 l, total height: 1,550 mm, total width: 1,260 mm, total length: 1,900 mm, water tank capacity: 250 l, battery voltage: 36 V, noise level: 67 dB, We offer for sale a Karcher B 250 R + D100 ride-on scrubber dryer equipped with an operator’s seat. We also have an R 100 cleaning head available in stock, which can be swapped at any time. Condition of the machine: Very good Year of manufacture: 2015 Operating hours: 775 hours The machine is in excellent condition, both visually and technically. It has undergone a comprehensive, detailed overhaul, making it fully operational and ready for immediate use. Each device we offer is shown in authentic photos — you are buying exactly the machine you see in the images. All equipment purchased from us comes with a 12-month WARRANTY. Technical specifications: Drive type: Battery powered Brush working width (mm): 1000 Working width / suction (mm): 1200 Water tank: clean / dirty (l): 250 / 250 Theoretical surface performance (m²/h): 8000 Practical surface performance (m²/h): 6000 Battery power supply (V/Ah): 36 / 630 Battery run time (h): max. 6 Brush rotation speed (rpm): 140 Brush pressure (g/cm²): 35 Water consumption (l/min): 8 Laodpfjw A Axhex Anxog Sound pressure level (dB(A)): 67 Rated power (W): up to 4600 Dimensions (L x W x H) (mm): 1900 x 1060 x 1550

Condition: excellent (used), Year of construction: 2000, Conveyor belts-Schuma Type: PRO-WA2 500-450/320 Year 2000 L. 4.0 meters W. 0.40 H. Up to 1.1 meters Ledpfx Ajvy Awyonxsag

Condition: used, Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder Ljdpfxjv N Uwws Anxsag -Hydraulic cylinder: tie rod cylinder stroke 126 mm -Type: unfortunately without type designation -Piston rod: Ø 38 mm -Holes: Ø 25/30 mm / Distance: retracted 735 mm -Dimensions: 785/75/H107 mm -Weight: 13.3 kg