Pressure tank

Werk Steinecker

Condition: used, Year of construction: 1998, total length: 4,000 mm, total width: 2,000 mm, total height: 2,600 mm, water tank capacity: 9,000 l, Item: AV-H0245.-Sileborg Horizontal Tank External dimensions: W 2000 mm, L 4000 mm, H 2600 mm. Horizontal stainless steel tanks – 2 units. Insulated with jacket. Top-mounted piping. Nwjdpfxownnzle Afwjk Manhole at the top.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 24,400 l, total height: 5,115 mm, inner diameter: 2,900 mm, outer diameter: 3,100 mm, overall weight: 4,500 kg, wall material: stainless steel, wall thickness: 4 mm, wall structure: double-walled, number of chambers: 1, operating temperature: 40 °C, operating pressure: 3 bar, Equipment: CE marking, Stainless Steel Pressure Vessel (Beer Tank), Insulated, Temperature-Controlled Technical Data / Dimensions Available units: 1 Volume: approx. 24,400 liters Type of vessel: Pressure vessel Condition: factory new Food-grade: yes Construction: vertical, standing Notes: Beer tank / Beer pressure tank Internal diameter: approx. 2,900 mm External diameter: approx. 3,100 mm Cylindrical height: approx. 2,900 mm Total height: approx. 5,115 mm Shell thickness: approx. 4 mm Weight: approx. 4,500 kg Specific gravity of medium: 1 t/m³ Operating pressure: overpressure Maximum operating overpressure: 3.00 bar Test pressure: 4.30 bar Bottom wall thickness: approx. 8.0 mm Top wall thickness: approx. 8.0 mm Shell/cylinder wall thickness: approx. 4 mm Floor clearance: approx. 430 mm Material / Properties Inner shell material: stainless steel Material grade: V2A-1.4301 (AISI 304) Double jacket material: stainless steel Legs material: stainless steel Outer surface: mill finish, IIB Inner surface: 2B mill finish Internal weld seams ground Notes: Tank ends (heads) internally ground, Ra < 0.8 µm Heating / Cooling System Heating / cooling system included Number of cooling zones: 4 Cylinder: Pillow Plates / Thermoplate (outside) Bottom head: Pillow Plates / Thermoplate (outside) Cooling medium: glycol Operating pressure: 4 bar Operating temperature: -10 / +40°C Double jacket volume: approx. 61 liters Heat / cooling surface area: Bottom head: approx. 3 m², Cylinder: 3.2 + 12.1 + 5.6 m² Heating / cooling system material: V2A-1.4301 (AISI 304) Insulation Insulation included Insulation thickness: approx. 100 mm Insulation material: perlite Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Equipment Supporting form: legs Number: 4 Fixing: fixed Height-adjustable legs Top end: torispherical (Klöpper) head Bottom end: torispherical (Klöpper) head Top head: 2 x crane lugs 1 x threaded nozzle DN 100 (for vacuum valve) 1 x threaded nozzle DN 80 (for cleaning, venting, and valve combination (RLV)) 1 x welded socket DN 65 (pressure measurement) 1 x thermowell TM251 (temperature measurement) 1 x ladder bracket Shell: 1 x sanitary manway (350 x 450 mm) with swing arm 1 x cable conduit DN 10 to manway 1 x CIP line DN 50 Nwjdpfx Asy Sb Hvjfwsk 1 x threaded nozzle DN 10 (sampling) Bottom head: 1 x outlet DN 50, extended to the front in threaded nozzle DN 50, terminating 1 x welded socket DN 65 (pressure measurement) Notes: Tank is unused and in original packaging. Documentation Drawing Test certificate CE declaration of conformity Parts list Material certificates

Year of construction: 1989, condition: good (used), Operating hours: 17 Nwodpfx Asbfa Hwefwjk Machine number: 160973 Power: 4,500 W Voltage: 220 V No-load voltage: 320 V Current: 16 A Insulation class: F Cooling type: F

Condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function: double-acting -Piston diameter: approx. 60 mm -Piston rod: Ø 50 mm -Cylinder tube outside: Ø 80 mm -Stroke: 1200 mm -Total length retracted center hole: 1460 mm -Piston rod mount: Ø 30 mm -Cylinder mount: Ø 30 mm -universally applicable: -Number: 2x cylinders available (1x without eye) -Price: per piece -Dimensions: 1530/100/H80 mm -Weight: 36 kg/piece Nwjdpfedcfmujx Afwjk

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Caterpillar 938M 5.5m3 heavy duty bucket Nwsdowa R Tbjpfx Afwsk In excellent condition

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. Njdpszlhp Usfx Afwjwk In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: good (used), 2 brackets for fixed bed milling machines Sizes: -Square 1: 370x620x2000mm Nwedeudvh Ispfx Afwsk -Square 2: 370x615x2000mm

Condition: good (used), Used stainless steel container / transport container / IBC Last use: Chemicals Item number: 10725 Volume: 1000 liters Type: Vertical in galvanized stacking frame Height of feet: 100mm Nedpfjrdwrijx Afwswk Material (wetted parts): 14301 / AISI 304 Manhole: Ø 400mm Design: Single-walled Operating pressure according to type plate: ATM Tank dimensions: Total height: 1600mm Total length: 1200mm Total width: 1020mm Materials: Interior: 14301 / AISI 304 Outer parts: galvanized steel Equipment: Nameplate: Yes Outlet diameter: 45mm Distance drain to floor: 250mm Outlet valve: Ball valve

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Nwedpfxsu R S A Do Afwjk Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: used, power: 338 kW (459.55 HP), gearing type: other, fuel type: diesel, first registration: 10/2013, total height: 3,790 mm, total length: 9,990 mm, total width: 2,600 mm, mileage: 147,871 km, driver cabin: other, emission class: euro5, Equipment: had accident, Vehicle location: in transit, green environmental sticker Construction: ARCHIVE IMAGE disassembled from Iveco StralisAT260S46Y/FS, wheelbase 4,800mm -78220- Nedpfx Afswgbvgswjwk Vehicle with approx. 150,000km mileage VIN: WJME2NTH40C272639 Location: A&K. ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! - .