Concrete mixer

12m3 stationaire betonmixer 4Rent

Condition: new, Year of construction: 2025, machine/vehicle number: 127802131, Additional options and accessories Notes concrete plant Frumcar EBA 1700 Year: NEW - 4 aggregate hopper of 25 m³ - Capacity: 70 m³/h - mixer size: 1,67 m³ / 2250 liter - K2 portable computer system - screw conveyor for cement - cement silo 55 to. - international assembly included - 2 years guarantee This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website Ltodpfjhd I Trex Ah Uoa More information Application: Construction, Material used: Concrete,

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW Lodeu I E Emepfx Ah Usta weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: good (used), Year of construction: 1998, Concrete mixing plant Imer Betomatik 508 -year of construction 1998 -Power approx. 10 cbm/h Ledpom Uyvkefx Ah Ujta -Cement silo 40 t -mixing portal with mixer and control -scraper arm with chain for 2 kinds of gravel Reference picture

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Ltedpfxoxm Sude Ah Uoa Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg

Condition: used, MIMAKI 400-160 SUV Ljdpfx Ahexf Hpaj Ueta Cartridges also available separately from the machine!

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm Lsdpfx Ahoxddvnj Ueta At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Lsdpfxoh Rwc Ee Ah Usta Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Ledpfov Dwirjx Ah Usta

Condition: new, Year of construction: 2025, EuromixMTP - Roll-off tipper - Superstructures - Truck mixer EUROMIX MTP - Truck mixer superstructure EM 5 L lightweight construction Model: EM 5 L * Nominal volume 5m³ ready-mixed concrete * Mixing drum in lightweight construction * Mixing drum in lightweight design made of HARDOX S450 * Mixing spirals in lightweight design made of HARDOX S50 * Gearbox made by ZF P4300 * Hydraulic pump Bosch Rexroth * Hydraulic motor Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electric start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, one-sided with C-coupling * Mixing drum with a service flap * Step ladder with stand platform * Rubber attachment on the filling funnel * Swiveling, single-arm discharge chute made of steel * Wear plates in the filling funnel, discharge bowl and swivel cord * Drum lock to secure the drum during maintenance work * Polyurethane primer * with emergency stop function in accordance with EU safety technology * steel wings over the rear axles * 2x extension gutters made of steel or plastic * Water system * 500l water tank (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection "C" coupling, * Operation & electrics * Mixer operation - mechanical rear * Start-stop system (with EDC Lodpfx Ahevv D E Ro Usta If you have any further questions, our team is available in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ????? ????? * Govorimo Srpskohrvatski

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Ledowpfv Aopfx Ah Uota Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!