Four shaft shredder

4-Wellen-Zerkleinerer GZ 30 GZ 30

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. Nkjdsrvh Tmopfx Aaceu We can also offer full electrical installation and assembly of line on site.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them. Nkjdehclffepfx Aacou

Condition: refurbished (used), functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Nksdpfx Aoxl Rqbeacou Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Nkedpfx Aot Tcz Uoaceu

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 Nkjdjx Rn Udspfx Aacsu 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Complete hydraulics/control cabinets

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green Nkodpjq Iivasfx Aacsu - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer Nodsxv Dkcspfx Aacsku - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Nedorah Evspfx Aacoku Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: new, Technical Data: - Hopper opening: 1850 x 1250 mm - Hopper volume: approx. 3.0 m3 - Rotor diameter: 500 mm - Rotor length: 650 mm - Rotor speed: 80 rpm - PLC control - Motor–gearbox: 18.5 kW - Control cabinet (completely wired) incl. 5 m cable - Automatic star-delta start - Weight: 3600 kg - Performance depends on material Main applications and processable materials: - Recycling and volume reduction of non-ferrous metals Nsdpjwb Sdqjfx Aacjku - Recycling and volume reduction of wood waste - Recycling and volume reduction of plastics and foam / Styrofoam - Recycling and volume reduction of electric cables and coils - Recycling and volume reduction of plastic containers and composite materials

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Nodpfx Asv N Eiqoaceku