Used crushing units for sale (130)

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm Gsbweztndusxtbcsuf -Weight: 8400 kg / 340 kg

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side Guebwxoltmi Sstbcef - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Price and further information upon request.

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Gjbwxtbeb Ny Eyscsuf Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Gjboznmpxewxtbcjuf Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: ready for operation (used), Year of construction: 2004, One shredder is available, blade width: 3x 46mm, power: 30kW. Gusbwjh A Rqujxtbcof

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), The Vecoplan All-Shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power of 55 kW, is equipped with 60 cutting knives, each measuring 60x60 mm. A turbo clutch facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine is offered complete with the control panel. The hopper and extraction hood are included. If required, the infeed conveyor – pit conveyor with a width of 1000 mm – can also be purchased for an additional EUR 9,500. Gobwxszmzduetbceuf If required, the discharge conveyor, 650 mm wide, with a bend and magnetic head pulley – discharge height of 3800 mm – can also be purchased for an additional EUR 11,000. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility in Europe. The details for optimal transport need to be arranged. The machine price is without packaging on a pallet.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Gujbwjztp D Aoxtbcef Erdwich HA800 hammer mill Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: like new (used), Previous Next MFL CJ 108/80 Jaw Crusher “MFL CJ 108/80” for Sale Manufacturer: Maschinenfabrik Liezen G.M.B.H. Gsbwxtbeglvx Tsceuf Type: CJ 108 / 80 Mach. No.: 95 395 103 Inlet size: 1.080 x 800mm Electrical Motor: Included

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material - Warranty available upon request! - Fully operational and ready for immediate use Guebwxtbjw N Rv Tecjf - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. Guebwxtbozl Shzecof • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: Gusbwxszl E Stotbcef 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Gsbwozl E N Esxtbcjuf Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers Gebwxjxmvplstbceuf - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm Gjboiqu R Djwxtbcjuf -Weight: 74 kg net complete

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 2,500 kg, opening width: 1,400 mm, extraction nozzle diameter: 200 mm, power: 37 kW (50.31 HP), We are offering this used Gross GZ40 shredding plant, manufactured in 2021. Four-shaft shredder GZ 40 Feed opening: 1,400 x 1,300 mm Guobwjzr Rvdoxtbcef Throughput capacity: material and screen dependent Disc diameter: 280 mm Cutting head: 700 x 760 mm Number of cutting shafts: 2 Number of cutting discs: 38 Number of clearing shafts: 2 Number of clearing discs: 38 Motor power: 2 x 18.5 kW Screen size: without screen Suction nozzle: 200 mm Weight: approx. 2,500 kg Machine with hopper, control cabinet Year of manufacture: 2021 If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2016, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. Gobwxtjzlh Taobcsuf This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. If you have any questions, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 2,100 h, functionality: fully functional, overall weight: 50,500 kg, Sandvik QJ341 jaw crusher 2016 year 2100 hours on crusher Gsbsyn Inkswxtbceuf 4700 hours on engine CAT C9.3 engine Inlet 1200x750 mm CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 50,5 tons Fitted with side conveyor Fitted with overband magnet Machine in great working condition, ready for work like NEW

Condition: good (used), Pearl mill, agitator mill, shredder, crusher, grinding mill, counter blade, crushing blade, counter cutter -Counter blade: Length 640 mm Gjbwxtbszcu Duocjuf -Hole spacing: 173 mm / bore Ø 22 mm -Number: 3 knives available -Price: per piece -Dimensions: 640/150/29 mm -Weight: 21.3 kg/pc.

Condition: excellent (used), functionality: fully functional, Used Sandvik CV217 VSI Crusher Gujbwey Swimjxtbcsf Year 2012 All New Wear Parts Shotblasted and Painted 185kW Electric Motor Complete With Electric Control Panel Complete With Support Legs Approx Weight 9,5000 Kgs Excellent Condition

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. Guobwxten I Rgpjbcof We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2026, Disc cutter for the efficient shredding of rejected rolls. Features: -Automatic safety locking system -Blade guard -Emergency stop pull cord -Siemens PLC Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7.5kW Cutting force: 30 tons Machine in stock, immediately available. Price and further information upon request. We will gladly provide you with a non-binding offer. Guobwxjn Hyxlotbcef

Condition: new, Roller splitter RGS20 Motor power 7.5kW Cutting force 20 tons Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm Machine weight approx. 2500kg Tank capacity approx. 100 liters -Body color RAL according to customer requirements Protective grille/blade bar RAL 1028 melon yellow Ordered goods Gebwxtoq A Turjbcsuf Price and further information on request

Condition: new, Roll splitter for shredding waste rolls of paper and film - motor power 9kW - PLC-based control, two-hand safety circuit D2h9jg7 - Cutting force 35to - Splitting table straight version - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons -Color RAL 5012 - light blue - Hand protection grille in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Guobotvgzbswxtbcof Stock item - immediately available

Condition: new, - Motor power: 15 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 50 tons - No-load speed: approx. 22.3 mm/sec - Splitting table: straight design - Cutting channel: - Max. length: approx. 3000 mm - Max. opening: approx. 1250 mm - Machine weight: approx. 4.8 tons Made to order. Guebwxtefbx Nbjbcsf Price and further information available upon request.

Condition: new, Year of construction: 2026, - Motor power: 7.5 kW - Cutting force: 25 tons Cutting channel designed for: - max. roll length: 1,500 mm - max. roll diameter: 800 mm - Machine weight: approx. 3,000 kg - Tank capacity: approx. 110 liters - Hand protection grille at the operator control panel and opposite side - Splitting table, straight design Gjbwxtbstvmw Doceuf - Documentation: 2 copies in German (1x text format, 1x CD) - Color: RAL 5012 – light blue Protection grille/knife beam: RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request