500hl vertical stainless steel tank

50000l

Year of construction: 2004, condition: good (used), Used PolyClip FCA 3463 is an automatic food clipper used for closing plastic and collagen casings from calibers 40 to 120 mm. Caliber flexibility is achieved by quickly changing clip sizes from 15 to 18 mm and from 30 to 36 mm. Equipped with automatic loop feeder. Producer: Poly-clip Bodpsk T A D Rjfx Aczodk Model: FCA 3463 Type: Automatic double clipping machine Power: 2.8 kW Dimensions: L 1300 mm x W 1575 mm x H 2170 mm Weight: 625 kg

Year of construction: 2020, condition: new, For crown capper ø26mm incl. sorting unit, for easy application of the crown capper onto the bottles. Stainless steel construction with mit synthetical sorting unit. capacity approx. 300- 500 B/h Bodoclq Ufopfx Aczodk also available for ø29mm crowncaps

Condition: excellent (used), Year of construction: 1994, 2 fired steam boilers ----- - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 sqm capacity : 800 kg/h permissible operating pressure : 10,0 bar increased test pressure : 18,0 bar Water content at NW approx. : 748 l Water content full approx. : 1,108 l Year of construction : 1994 Bedpjvdbkmofx Aczodk equipped with Weishaupt gas burner G5 1-D, ZMD, 175-940 kW, gas control system, feed water pump, switch cabinet and the existing coarse and fine fittings.

Year of construction: 2024, condition: new, The manual bottle filler is specially easy to use. The filling mechanism works on the basis of gravity. The handle is pulled down and the strong stream of liquid flows out of the head. Capacity – 600 pcs. of 0,5 L bottles per hour. The bottle filler is completely made of stainless steel. Gravitational mechanism provides a strong stream as well as easy and effective work. Comes with a buffer tank for fluid. Buffer tank has an integrated flowmeter which helps to follow the liquid level on the buffer tank. Suitable for various liquids that are similar to water consistency such as juice, wine, vodka, etc. Bdedpfx Acoizbb Hjzok Mounted on the pivoting wheels.

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide Bdedpfx Aoiwfp Tsczsk - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Bjdpfx Acjfi Tmcjzsdk

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP Bjdpfxsppyhto Aczodk dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Bodpfxjd Sr S Is Aczedk

Year of construction: 2013, condition: ready for operation (used), A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible. Bodov Ext Iepfx Aczedk

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Bodpfx Acjn Dw Nkszodk