Package separation for milled woods

VKM

Condition: new, Year of construction: 2026, functionality: fully functional, VKM – Debarking Machine PS2000 Wood diameter: 40 – 200 mm Debarking disc diameter: 458 mm Number of debarking knives: 8 Feed rate: 5 – 15 m/min Air consumption: approx. 60 NL/min Debarking disc speed: 1500 rpm Drive power, debarking disc: 15 kW Drive power, lower feed roller: 0.37 kW Drive power, upper feed roller: 0.37 kW Gkodpfx Aev Uxm Tjkhsd Electrically adjustable log diameter setting via foot switch, also during operation. This debarking machine is used for white peeling of wood, preserving the sapwood as much as possible. This results in good impregnation results without further surface treatment.

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave Gkjdpfxjrg Exrj Akhod

Condition: new, Year of construction: 2026, The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm. Gkedpfxofw Ay Ne Akhed RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 – 300, RM 160 – 350, RM 160 – 400 The rounding machines haf a lot of new features. All feed wheel pairs are opening and closed by valve cluster no mechanical dimension adjustment is needed. The rounding machine control is done by movable switch cabinet and control box for pressure regulation of segments of fedd rollers. The motors will be start by softstarter. For smoother surface condition or faster feed speed the machining heads are turning with higher speed. A control system is available for automatic speed control, depending on differenc between final log size and incomming log dimension. For save operation all doors are secured with electrical holder. To open the door the machine has to be stopped. This is needed to fulfill the high expectation of the the machine safety for secure operation.

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM Gksdpfxohm S Rus Akhsd The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Gkjdpfx Akox Ebzdehed Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Year of construction: 2026, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW PTO drive Gkodpfxjfw A D No Akhsd Tractor pump

Condition: new, Year of construction: 2026, feed rate X-axis: 30 m/min, • Wood diameter: machine-dependent, possible diameter range of 40 to 160 mm or 40 to 200 mm • Feed rate: up to 30 m/min • 3 infeed rollers for centering the log • 2 outfeed rollers • 1 saw blade • Cut-off saw motor: 7.5 kW • Feed motor: 1.5 kW Godpfjwzwifox Akhskd Can also be used for hardwoods, but a higher motor output is required in that case.

Condition: used, Round workpiece grinder Manufacturer: BRUSA & GARBOLI Country of manufacture: Italy Model: LT 130 - BRUSA DI GARBOLI Year: 2023 Technical parameters: min. diameter (with special feed rollers): 10 mm max. diameter 127 mm Gkodpfx Aoxdivaskhsd min. - max. length 680 - 6000 mm sanding belt size 2000 x 120 mm disk motor power 2.2 kw sanding belt motor power 5.5 kw feed motor power 0.25 kw feed speed 1 - 20 m/min weight 760 kg dimensions 160 x 13 5x 170 cm electrical connection 400V / 50Hz feed system self-centering feed speed regulation frequency sanding belts 1 set Adjustment tools 1 set Instruction manual 1 set CE certificate of conformity Optional equipment: PLC control unit “Keyence” photocell, control of opening/closing of the grinding belts Outgoing workpiece feed rollers with drive

Condition: new, Year of construction: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing specifications for a wide range of woodworking machinery. Some parts are available directly from stock. Below are some particularly frequently requested parts: Centering rollers bore 40mm €112.00/each Centering rollers bore 50mm €156.00/each Feed roller bore 40mm €118.00/each Feed roller bore 50mm €138.00/each Exit roller bore 40mm €102.00/each Feed roller bore 50mm €126.00/each Gkjdpfowagxmsx Akhjd Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to prepare a quotation including commercial terms; further spare parts available on request.

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. Gkodpfx Aeg Rn Avskhjd For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Send us your inquiry today!

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Gedpom Rhfdjfx Akhskd