Toolshed Slovakia spol. s r.o

Condition: good (used), Year of construction: 2012, operating hours: 7,360 h, Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. Gbedpfxezt R U No Aqier With Coolant System, Tool Setter, Parts Catcher, Seoam CAH-08 3 Jaw Power Chuck, Tailstock, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,325 x W1,600 x H1,600mm. Weight 2,900kg.

Condition: used, Year of construction: 2000, functionality: fully functional, CNC turning center SPACE TURN Serial number 0932 6 axes Turret with 12-position tool changer Travel distances: X-axis: 280 mm Gbsdpfx Asztp E Hoqier Z-axis: 1000 mm CNC control: OKUMA OSP-U10 Including chip conveyor ENOMOTO Model PA-00040 Year of manufacture: 2015

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW Gbodpjzr Hyfefx Aqior weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: used, Harrison Alpha 1350XS CNC Toolroom Lathe (2010) Swing Over Bed 350 mm Swing Over Cross Slide 196 mm Swing in Gap 535 mm Gsdpfx Aezq Ddxeqiebr Distance Between Centres 650 mm Maximum Turning Diameter 350 mm Spindle Speed Range 1 – 3,500 rpm Fanuc Oi-TD CNC control Harrison Alpha conversational programming Fanuc Manual Guide i Full ISO G-code programming capability 2-axis CNC control (X and Z) Electronic handwheel operation Machine Weight Approx. 1,800 kg Machine Dimensions (L × W × H) 2,400 × 1,700 × 1,500 mm

Condition: used, BIGLIA B 470/YSM is a CNC turning lathe engineered for precision machining, delivering high accuracy and reliable performance. Capacities: turning diameter 210 mm, bar diameter 65 mm, turning length 300 mm, Y axis 110 mm; two turret slides (2) with 12 positions each and 12 driven tools per turret. Key specifications: max speed 4000 t/min; power of back spindle 11 kW; spindle motor 26 kW; voltage 50 Hz 3x 400 Volt; machine weight about 6150 kg; time under power 74536 Heures, operating time 24651 Heures, working time 8588 Heures. Accessories: bar feeder LNS HYDROBAR SPRINT. Capable of achieving tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool industries Gsdpfxjzqbh Ie Aqiobr

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Gbjdpfx Aozpxgxjqisr Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Counter spindle Bar feeder

Condition: used, CNC lathe Mazak Super Quick Turn 15M Maximum turning diameter: 300 mm Swinging diameter: 531 mm Maximum turning length: 510 to 528 mm Spindle bore: 52 mm Godpfx Aeznvz Doqiobr Tool turret: 12 stations Machine weight: 4200 to 5100 kg The machine can be removed from the company premises, but the buyer must arrange for loading (using a forklift). The machine was in operation until recently but must be sold due to space constraints. An invoice can be issued upon request. For further information, please send a message.

Condition: used, Year of construction: 1991, turning length: 530 mm, turning diameter: 340 mm, spindle bore: 78 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 3,500 rpm, overall weight: 6,000 kg, CNC MF T4, 3-axis machine with C-axis 12-position motorized tool turret 250mm chuck 78mm spindle bore Maximum spindle speed: 3500 rpm, power: 15 kW Distance between centers: 625mm Maximum turning diameter: 625mm Chip conveyor Weight: 6000 kg Gedpoznvizefx Aqiobr

Condition: not inspected (used), Year of construction: 2001, turning length: 400 mm, turning diameter: 325 mm, rotational speed (max.): 4,500 rpm, overall weight: 4,500 kg, Siemens 810D control system, 3 axes Spindle bore: 52mm, spindle power: 15kW Spindle speed: 4500 RPM 12-tool turret, VDI40, numerous rotary tools Chuck diameter: 204mm Chip conveyor Gbsdsznk Sqepfx Aqior

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Turning diameter max.: approx. 300 mm Turning length max.: approx. 300 mm Spindle bore diameter: approx. 52 mm Main spindle speed max.: 4,500 rpm Tool turret: 12 stations Repeatability: 0.003 mm MACHINE DETAILS Control: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Compact design with low space requirements User-friendly CNC control High reliability Low maintenance requirements Gbedpfx Aeznb Ntjqisr Complete technical documentation

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 497 mm, turning diameter: 300 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, Mazatrol PC Fusion CNC 640T CNC control 3-jaw chuck 12-fold revolver C-axis driven tools Y-axis tool presetting device (tool eye) tail stock chip conveyor coolant device bar loading device for 3m bars 14 fixed tool holders 8 driven tool holders Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 300 mm max. Schwingdurchmesser / max rotary diameter 525 mm max. Drehlänge / max. turning length 497 mm Drehzahl / spindle speed 35-4000 UpM/ rpm Anzahl der Revolverplätze / numbers of tool places 12 X-Verfahrweg / x-travel 180 mm Z-Verfahrweg / z-travel 575 mm Y-Verfahrweg / y-travel +-50 mm Futterdurchlass / spindle hole diameter 62 mm Eilganggeschwindigkeit X, Z / rapid feed X, Z 30, 30 m/min. Gewicht der Maschine ca. / weight ca. 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Gedjzmd Tlepfx Aqisbr Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1999, Swing diameter: 630 mm over the bed and 290 mm over the cross slide Spindle speed range: 8 - 3,000 rpm Drive power: 28 kW Godpezl Tlnefx Aqiobr Machine weight: 5,000 kg

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. Godpfxezl D Ruo Aqiebr The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: as good as new (ex-display), Year of construction: 2026, General Control: Siemens 828 D Turning diameter: 350 mm Turning length: 452 mm Gedpfszl Ahfsx Aqiebr Swinging diameter: 700 mm Bar diameter: 65 mm Spindle Bar diameter: 65 mm Chuck size: 200 mm Spindle speed: 4,500 rpm Spindle power: 16.5 kW Spindle torque: 196.6 Nm Tool turret Technology: Turret with 24 stations Tool holder: BMT 55 Tool drive speed: 5,000 rpm Tool drive power: 5.6 kW Tool drive torque: 35.6 Nm X-axis travel: 220 mm Y-axis travel: +/- 55 mm Z-axis travel: 580 mm Equipment Chip removal: Chip conveyor Coolant supply: Extended, 190 liters Coolant pump: 15 bar high pressure Tool measurement: Measuring arm in the working area Part removal: Part catcher Bar magazine: Prepared

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10125101, turning diameter over cross slide: 340 mm, turning length: 1,000 mm, turning diameter: 595 mm, spindle bore: 64 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, Equipment: bar feeder, chip conveyor, documentation/manual, Machined had crash 1 year ago. It was repaired by Okuma service. Changed new bed, ball srew, all original bearings, revolver repair. But main spindle runout is ~0,3mm and this was not fixed. Machine after repair was all time operational state. It could manufacture simple parts. Drill, thread, turn nice from bigger dimensions. But manufacture precise parts need additional repair of spindle to fix runout. Together with tool holders 20-30+ and chuck jaws 30+ . There are 3 active tools milling/drilling 90deg Also mist separator Godpfx Aozlarhsqiobr And bar feeder or 4000mm lenth Chip conveyor

Condition: used, turning diameter over cross slide: 185 mm, turning length: 250 mm, turning diameter: 280 mm, spindle bore: 50 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 285 mm, total height: 1,730 mm, total length: 2,180 mm, total width: 1,610 mm, overall weight: 3,000 kg, General Application: The Gildemeister CT 20 is primarily used in precision machining, especially for the production of complex components in industries such as the automotive industry, aerospace, and general mechanical engineering. Due to its capabilities, it is suitable for tasks that require high accuracy and efficiency in turning operations. Gedpfx Aozi Uqgsqijbr Advantages: - The compact design allows for efficient use of space in manufacturing environments. - The high spindle speed of 6000 rpm enables fast machining and reduces cycle times. - The versatile turret with 12 tools and 8 rotating tools increases productivity, as multiple machining operations can be performed without tool changes. - The robust spindle motor power of 7.5 kW ensures consistent performance even under heavy workloads. - The precise machine travels in the X and Z axes facilitate complex machining operations and contribute to high-quality production. Buffer battery is low, machine data needs to be checked!

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Gbedpfx Aqszi Ihfeior Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Godpfx Aoziqp Soqisbr Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Spindle bore: D62 mm Turret: 12-station Max. tool size: 25x25 mm Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 310 mm, spindle bore: 78 mm, rotational speed (min.): 4,500 rpm, total height: 2,120 mm, total length: 5,000 mm, total width: 2,065 mm, overall weight: 8,100 kg, DBC Turning Length 1000 mm Swing over bed Ø 310 mm Spindle bore 78 mm Gsdpfx Aqszimnqjiobr Power 25 kW Length 5000 mm Width 2065 mm Height 2120 mm Weight 8100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Commissioned: 2002 Control system: U100L A video of the machine can be viewed on our website. Machine features: ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe Gbsdpfxjzh Iwke Aqijr ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 38 rpm, total height: 1,745 mm, total length: 2,200 mm, total width: 1,720 mm, overall weight: 4,300 kg, Okuma SpaceTurn LB300-M CNC Okuma OSP U100L Controller Max. turning diameter 340 mm Max. turning length 480 mm Distance between centers 500 mm X-axis travel 280 mm Z-axis travel 500 mm C-axis 360° (0.001 increment) Rapid traverse X-axis 20,000 mm/min Rapid traverse Z-axis 25,000 mm/min Incremental feed rates for X and Z axes from 0.001 to 1.000 mm Spindle mounting A2-8 Gbodpfxszh Hu Us Aqijr Speed 38-3800 rpm Power 22 Kw Powered tools Speed 45-4500 rpm Power 3.3 Kw Turret Type VDI 40, 12 Stations Square tool section 25 mm Bore section 40 mm Tailstock Bore diameter 90 mm Bore travel 120 mm Tailstock mounting MT5 Chip conveyor Kitagawa B210 chuck

Condition: used, Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, Manufacturer Gildemeister Gjdpfxjzh Ewhj Aqiobr CTX 320 V5 Year of manufacture 2004 Condition: Used Control system: Siemens 840 D ShopTurn Operating hours: 60,000 h Spindle hours: 29,000 h Technical data: Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Spindle speed range - main spindle: 5000 rpm Spindle speed range - sub spindle: 5000 rpm Bar diameter: 65 mm C-axis: 0.001° Turret positions: 12 Tool holder: VDI 30 Driven tool stations: 12 Spindle speed of driven tools max.: 5000 rpm Rapid traverse X / Z: 60 / 45 m/min Total power requirement: 32 kVA Machine weight approx.: 4.3 t Space requirement approx.: 3895 x 2284 x 1885 mm Accessories/Equipment Chip conveyor Parts catcher Conveyor belt C-axis Driven tools Documentation --Used machine, no guarantee-- --Errors and prior sale excepted--

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag Gedozhwnrepfx Aqijbr

Condition: good (used), Year of construction: 2000, Well-maintained, used CNC lathe from Okuma. Type: LT10-M Capacity: ø 210 x 130 mm Gbedpfx Aqozhal Heijr Spindle bore: ø 53 mm Okuma OSP-U100L control system Further specifications can be found in the data sheet.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Gbsdpfozhaawex Aqior