Used other machinery for sale (722)

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. Fpsdpsy Rflyefx Apwjg The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, machine/vehicle number: Model TS170, power: 50 kW (67.98 HP), input voltage: 240 V, heating capacity: 50 kW (67.98 HP), L.B. WHITE PREMIER 170 INDUSTRIAL HEATER – INDIRECT FIRED – 49kW L.B. White Premier 170 industrial heater (Model TS170). High-output indirect-fired unit producing clean, dry heated air – ideal for construction sites, workshops, drying, or temporary heating. Specs: Approx. 50kW output (170,000 BTU) Propane gas 240V single phase High airflow unit (industrial capacity) Condition: Good used condition Sold as seen Fodpfxoy Rfd Ns Apwepg Uses: Site heating Drying plaster / concrete Warehouse heating Marquees / temporary structures Message for more details or video of it running.

Condition: used, functionality: unexamined, Complete Sand Wash Plant (Trio / Siltbuster) Complete sand wash plant to include: Lamela Siltbusters Fsdpfxsy Drtke Apwepg Trio log washer Trio sand washer Trio shaker 700kva generator All assoicated pumps, conveyors, tanks, power packs, framework. Note - partially decommissioned for potential relocation.

Condition: used, Colour: Grey Dimensions (LxBxH): 125 x 50 x 100 cm Price: On request - Documentation available: No - CE certificate present: No - Voltage [V]: 24 - Current consumption [A]: 5.5 - Transport dimensions: 1250mm x 500mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fpjdpfx Aoyymnujpwog Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Workshop Liquidation / Metalworking Machinery Package Specification: Industrial workshop equipment due to site closure Location: 44319 Dortmund Method of Sale: Ex-works Fedpfoy Rrk Ajx Apwepg For sale is a comprehensive machinery package from an industrial metalworking workshop. Included are various machine tools for metalworking, milling, sawing, drilling, grinding, and general workshop operations. This machinery package is ideally suited for metal fabrication, locksmithing, toolmaking, maintenance, training, and workshop operations. Included Machines / Equipment: - FORTE Metal Bandsaw Type Forte 400 - GILLARDON Column Drilling Machine Type GB 30 V - Universal milling machine / Tool milling machine - ELesta VISULESTA II Digital Readout - Workbenches / Worktables - Workshop cabinets / Steel cabinets - Vises and clamping devices - Additional workshop accessories as shown in the images Technical data according to nameplates / photos: FORTE Metal Bandsaw Manufacturer: Maschinenfabrik FORTE GmbH, Winterbach Type: Forte 400 Serial No.: 1848 Three-phase power: 50 Hz Operating voltage: 380 V Control voltage: 220 VAC with transformer Solenoid voltage: 24 VDC Rated current: 10 A Max. fuse: 20 A Cutting speeds (per plate): 40 / 80 m/min 60 / 120 m/min GILLARDON Column Drilling Machine Manufacturer: GILLARDON Type: GB 30 V Made in Germany Speed range: 60 – 1600 rpm Universal Milling Machine / Tool Milling Machine Heavy industrial design Digital position readout ELesta VISULESTA II Machine vice mounted Coolant system included Further technical data – see photos Actual technical data, dimensions, and weights may vary. Equipment: - Industrial workshop machines - Heavy cast-iron design - Machine tools for metalworking - Partially fitted with digital readout - Partially fitted with coolant system - Workshop cabinets / steel cabinets - Workbenches / worktables - Vises and accessories Condition: Used machines with age- and usage-related signs of wear. Visual condition as shown in photos. Machines are from industrial workshop operation. The machines were last in use during workshop operations. Scope of Delivery: Machinery package / workshop equipment as shown Machine tools, workbenches, cabinets, and accessories Delivery includes only the items visible in the photographs No warranty given. Commercial sale – sale without warranty. Subject to change, prior sale, and errors.

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Fodpfx Aey Rp R Tjpwepg Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Condition: Used system with age and usage-related wear. Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Commercial sale – sale without warranty. Subject to changes and errors.

Condition: used, Colour: Grey Dimensions (LxBxH): 170 x 65 x 160 cm Price: On request - Details: - └ Description: Roller width 1050mm Fpjdpfoyymxysx Apwsg - Documentation available: No - CE certificate present: No - Voltage [V]: 220 - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2009, condition: used, Colour: Grey Empty weight: 150 kg Dimensions (LxBxH): 50 x 50 x 120 cm Price: On request - Year: 2009 - Documentation available: No Fpedpfx Apsyymzhowog - CE certificate present: No - Serial number: 1248S - Transport dimensions: 500mm x 500mm x 1200mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW Fpjdpfx Ajyw I Hmepwsg • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone. Fpsdpey Naf Ejfx Apweg

Condition: used, F J Edwards Ltd Sheet Metal Bender, Max Material Width 1850mm, Cast Iron Construction Fsdpey H Ifnofx Apwjpg Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Electrician workbench ESD workstation - Dimensions: 2100/900/780 mm - Conductive worktop with Anka-Plast coating - Suitable for workplaces where electrostatically sensitive components and modules are handled - Discharge resistance: according to DIN 51953 Fodpfx Apey N Sgzowepg Self-collection in Eindhoven / 23 units available from June

Condition: ready for operation (used), Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Comprehensive and professional unit, from dismantled machine line. Location: Hamont-Achel, Belgium Seller is not liable for typographical or data transmission errors. The machine is consistent with age in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Rexroth Siemens Hydraulik / Hydraulik aggregate 128 L/min Siemens motor 15 kW 1460 U/min Rexroth-Pumpe 1PV2V4-31 / 80RA37MWO - 16 Umfangreiche und professionelle Einheit, entstanden aus einer zerlegten Maschinenlinie. Standort: Hamont-Achel, Belgium Fedpfxsvilnao Apwepg Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 Rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Extensive and professional unit, originating from a dismantled machine line. Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Serial number: L177B31996J Fpsdpfx Aey Iv H Nspwjg VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS.

Condition: used, For Sale: Commercial Property Are you in the market for a robust and versatile commercial property for reuse or for erecting at your own site? This is your opportunity! Dimensions: Hall 1 - Width: approx. 22 meters - Length: approx. 70 meters - Height: approx. 6 meters Hall 2 Fpsdpfx Ajymlzfepwog - Width: approx. 23 meters - Length: approx. 20 meters - Height: approx. 6 meters The building is fully modular and will be carefully dismantled—making it ideal for reconstruction or as a source of quality materials for your own project. Sale Price: On request Interested or need more information? Contact us for further details, photos, or to arrange a viewing before dismantling.

Condition: used, power: 2 kW (2.72 HP), color: black, overall weight: 120 kg, Year of construction: 2018, Air output: 32200 m3/h Speed: Variable Waterreservoir: 180 L Noise: 50db~70db Dimensions (cm): 186(H)×155(W)×81(D)cm Weight: 120 kg Power consumption: 1.35 kw ( 1250Watt ) Fjdpfxjy Egkyo Apwjpg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Fpjdpfxey N Tbmo Apwsg Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: used, STC conveyor belt In-feed belt Fedpfxot Sbgyo Apwepg Dimensions are in the photo album

Condition: used, STC in-feed conveyor belt Fedot Sbg Hopfx Apwspg Measurements are in the photo album

Year of construction: 2014, condition: used, Good condition feed conveyor belt. Dimensions are in the photo's Fpjdot Ul Elopfx Apwjg

Year of construction: 2017, condition: used, 90 degree curved conveyor belt Fedjt Sbgtopfx Apwspg Measurements in the photo album

Year of construction: 2003, condition: good (used), machine/vehicle number: FA/07/RE/1612/3, For sale: Complete industrial extraction system consisting of 6 Colt Coltair roof fans, including the corresponding control cabinet/central control unit. Fedpfx Apjy Hw Avowjpg This system was used for ventilation and extraction in a warehouse measuring approximately 90 x 25 x 12 meters and has been decommissioned in working condition. The entire set has been professionally dismantled and is preferably sold as a whole. The fans are suitable for, among other things: - Welding fume extraction - Fume extraction - Ventilation of workshops and warehouses - General industrial air exchange Technical data per fan Brand: Colt International Ltd Product: Coltair Fan Unit Type: FA/07/RE/1612/3 Power supply: 400V Motor: 3-phase Output: 0.60 / 0.40 kW Speed: 900 / 650 rpm Capacity: 3.62 / 2.85 m³/s Converted per fan: approx. 13,032 / 10,260 m³/h Total capacity for the complete set Approx. 78,192 m³/h on high setting Approx. 61,560 m³/h on low setting What is included: - 6 roof fans - Complete control cabinet / control unit - Used, well-maintained industrial set - Professionally dismantled in working order Inspection possible by appointment. Loading on site by arrangement. Relevant keywords roof fan, extraction fan, industrial ventilation, welding fume extraction, warehouse ventilation, extraction system, 400V fan, Colt Coltair, roof extraction, industrial extraction set

Year of construction: 2008, operating hours: 25,000 h, condition: excellent (used), functionality: fully functional, construction height: 1,865 mm, nominal power: 45 kW (61.18 HP), pressure (max.): 8 bar, rotational speed (max.): 2,965 rpm, machine/vehicle number: 3887, FAD: 8.26 m3/min at 7.5 bar New oil cooler Equipped with heat recovery system KAESER Energy-Saving SIGMA PROFILE Direct drive Fpodpfx Apsy H R N Noweg Serviced with original parts by KAESER dealer

Year of construction: 2026, condition: new, functionality: fully functional, Maxpac currently has a container tilter in stock. The first photos show the actual machine; the last two are examples. Fsdoy Ick Uepfx Apwspg Faster loading and unloading with minimal product loss Deliver your bulk products to the packaging line in a sustainable way The container tilt machine, or container tipper, is a simple yet robust system that enables faster loading and unloading of containers with minimal spillage. As a result, it forms a valuable addition to the packaging process. The optimized workflow from start to finish not only leads to increased productivity, but also ensures higher quality of all packaged products. The machine is PLC-controlled, allowing for even distribution of bulk materials with a continuous and consistent feed to the packaging line. This improved productivity also results in uniform product packaging and significantly reduces wastage. It reduces waiting times for emptying containers, ensuring packaging operations can continue seamlessly. Consequently, demurrage and detention costs decrease drastically. The risk of worker injuries is also minimized, resulting in positive impacts on several HR-related costs. The container tilting machine is adaptable to various container sizes and types, making it suitable for a broad range of packaging requirements. This allows for efficient processing and packaging of different types of bulk materials. A top recommendation for businesses seeking to achieve significant profitability gains.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 591144, 2* galvanized compressed air receivers Including certificates Per air receiver: Design: vertical Air receiver volume: 5,000 l Max. overpressure: 11 bar Diameter: 1,400 mm Receiver height: 3,570 mm Fpedey Hx Dzopfx Apwsg Weight: 1,050 kg Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2 Pressure gauge set connection: G ½ Condensate drain connection: G 2½ Pressure vessel certification: RL 2014/68/EU Maintenance openings according to AD2000: 1x manhole Min. operating temperature: -10 °C Max. operating temperature: +50 °C Surface coating: galvanized