Delta Robot ve Makine San.Tic.Ltd.Şti.

Condition: used, Year of construction: 1990, pressure ca. 20 t Gjdpfxjx E Dt Ss Ab Ujkf

Condition: good (used), Year of construction: 2011, Pressure 160 t Total power requirement 18.5 kW Machine weight approx. 13.5 t Gkedpfx Aox Ehgaob Uof

Condition: excellent (used), Year of construction: 2005, pressure 40 t dayligth max ohne Richtbrücke 885/ mm daylight mit Richtbrücke 595 mm throat 250 mm straightening stroke 170 mm feed down 7-50 mm/sec feed up 0-139 mm/sec table height o. Richtbrücke 700 mm table height m. Richtbrücke 990 mm work piece - max. 1000 mm table length 1500 mm table length m. Verlängerung 2.500 mm table width 305 mm total power requirement 7,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. BTH 2,5 x 1,58 x 2,75 m Includes alignment trolley with connectors Includes work light Includes accessories Gsdpfx Asxylqlsb Uskf Includes oil return filter Includes documentation

Condition: used, Industrial straightening machine, stabilizer straightener, bending machine, used equipment Manufacturer: Schneider Type: Richtmaschine Stabilisator Year: 2016 Electrical Data: 400V, 16A Gedpsxnq Dtofx Ab Ujkf Overall Dimensions: Width: 1900 mm Depth: 1250 mm Height: 1660 mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total width: 700 mm, pressing force: 16 t, working height: 1,050 mm, center height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Gkodoxldiqspfx Ab Ujf Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible.

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations Gsdexfb Ikopfx Ab Uokf of the machine.

Condition: new, bending radius min. 190 mm square edge steel 20 x 20 mm flat steel 100 x 7 mm round bar steel 22,0 mm L-beam 100 x 10 mm range L-W-H 900 x 430 x 310 mm weight of the machine ca. 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Gksdpfx Aoxcuyhsb Usf scope of delivery - Bending plate - Stepless angle stop - Terminal block with eccentric clamp - Material stop

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm bending radius min. 190 mm round bar steel 18,0 mm weight of the machine ca. 33,0 kg. Characteristics : - For precise cold and hot bending of flat, round and square steel - Stable design for screwing on the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient work Gedpfx Asxcux Rsb Uskf - Readable bending angle up to 120° - High repetition accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - offset block - Bending plate for round bar - offset plate - Radius bending plate R 10 / R 15 - angle stop - Clamping block with eccentric clamp - Material stop

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Gksdsxaz Igepfx Ab Ujf Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: used, Year of construction: 2008, Technical details: Gksdpfx Abjw Ng D To Ujf pressure: 6 t stroke: 1020 mm total power requirement: 3,5 kW Can only adjust between tips *

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 201805015, working length: 4,100 mm, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 185 t, overall weight: 18,000 kg, space requirement height: 3,440 mm, table length: 4,100 mm, installation height: 500 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system - G-CS active crowning system Gksdpfx Aewync Hsb Uof - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 23-9044, total width: 1,560 mm, total length: 3,540 mm, total height: 2,800 mm, pressing force: 50 t, overall weight: 6,700 kg, table length: 2,550 mm, travel distance X-axis: 600 mm, power: 5.5 kW (7.48 HP), distance between stands: 2,120 mm, installation height: 2,800 mm, operating speed: 150 mm/s, stroke length: 250 mm, table height: 910 mm, throat depth: 405 mm, type of input current: three-phase, Schiavi Macchine HFBs 50.25 press brake, 4 axes (X-R-Y1-Y2), year 2006, completely overhauled with new CNC Task SK12 and new front safety device by Nuova Elettronica. Equipped with 4 manual rear stops. HFBs press brakes represent the most technologically advanced model in bending automation. Paired with dedicated hydraulics and next-generation software, HFBs series models provide sheet metal processing companies with an effective solution to enhance their competitiveness. HFBs press brakes are especially suited for integration into a robotic bending cell. Gkjdpfxewybhpo Ab Usf

Condition: excellent (used), pressure 6,3 t throat 200 mm Gjdpewuu A Aofx Ab Uekf stroke 200 mm dayligth max 500 mm table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Condition: new, functionality: fully functional, machine/vehicle number: FDM-150E/3000, operating speed: 7 mm/s, reverse speed: 9 mm/s, overall weight: 10,000 kg, total length: 2,750 mm, total width: 800 mm, total height: 3,100 mm, pressing force: 150 t, Equipment: documentation/manual, safety light barrier, HYDRAULIC PRESS FOR FOLDING. The double-column hydraulic press FDM-150E/3.000 belongs to the F series and is specially designed for folding operations. It utilizes an optimized hydraulic system with a pressure of 295 Bar, ensuring prolonged durability and reliability. It meets and satisfies all essential safety and health requirements according to CE regulations. Gkjdpfxewpg D Uo Ab Uef STRUCTURE AND TABLES • Features a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Includes upper and lower machined tables made from C45E steel with DIN-650 grooves. The upper table ensures perfect alignment with four cylindrical side guides of 80 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings. • Lower grooved table measuring 3.100 mm x 600 mm. CYLINDER AND HYDRAULIC GROUP • Two double-acting main cylinders with chromed pistons and maintenance-free anti-wear guides. • Single-speed motorized hydraulic group. Includes cylinder decompression valve. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 7” HMI touchscreen mod. KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and holding time. It has storage capacity for 300 recipes, where all the previous values can be programmed. • Operation is performed via a low-voltage electric pedal. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector. TECHNICAL SPECIFICATIONS Power tn 150 Engine Power cv 11 Piston Stroke mm 250 Working Speed mm/s 7 Return Speed mm/s 9 Maximum Pressure Bar 295 Front Light mm 3.200 Side Light mm 500 Useful Vertical Light (Free Distance Between Tables) mm 550 Working Height mm 950 Total Front mm 2.750 Total Side mm 800 Total Height mm 3.100 Weight kg 10.000

Condition: like new (used), functionality: fully functional, total height: 2,900 mm, table length: 10,000 mm, total width: 3,660 mm, total length: 10,200 mm, table height: 900 mm, table width: 2,545 mm, pressing force: 100 t, overall weight: 26,000 kg, operating speed: 9 mm/s, reverse speed: 14 mm/s, pressure: 320 bar, power: 4 kW (5.44 HP), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor power kW 4 Motor ventilation switch power kW 0.37 Bridge travel motor power kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed mm/s 14.4 Max. pressure Bar 320 Working area mm 10,000 x 2,545 Ram stroke max. mm 450 Maximum open height mm 600 Lateral travel mm 2,120 Gantry travel mm 9,140 Working height mm 900 Gkjdpfx Aowkvmnsb Usf Total length mm 10,200 Total width mm 3,660 Height mm 2,900 Weight kg 26,000 The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLE • Electrically welded structure made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Longitudinal bridge travel achieved by frequency inverter and toothed belt. • Motorized lateral head movement. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. • Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool. • Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment. • Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed. • Cylinder decompression valve. • Pressure regulator. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual or semi-automatic operation. • Selector switch for choosing between rapid approach speed and slow working speed. • Operation via pendant control with emergency stop and low-voltage control. • Includes button to confirm a cycle.

Condition: new, neu ca. 4 Monate ab Auftragse Italien Godpfx Abswirpis Uokf 66700 € 1260.63 € 150 to 500 mm 1.550 x 2.000 mm 800 mm 20 mm/s 3 mm/s 2350 mm 2000 mm 2500 mm 4100 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: used, BRACKER RN 280 RADIAL RIVERTING MACHINE MAKE BRACKER, MADE IN SWITZERLAND MODEL RN 280 CAPACITY RIVET SHANK DIAMETER OF TENSILE STRENGTH 370N/MM2 1.0 mm – 12.0 mm AIR PRESSURE 14 - 88 PSI MAX. RIVERTING PRESSURE 340 KGS RIVERTING TIME 0.1 – 5.9 SECONDS WORKING STROKE 5.0 mm – 40.0 mm DIVE MOTOR 0.74 HP POWER REQUIRED 220V 3PH MACHINE WEIGHT 340 KGS MACHINE DIMS L x W x H 1220 x 915 x 1930 mm PLUS BRACKER FOOT TREADLE ACTIVATOR Gsdpfx Aswh N H Nob Uekf MANUAL HEIGHT ADJUSTMENT OF RADIAL RIVETING HEAD ON DUAL RECTANGULAR WAYS PRESSURE ADJUSTMENT WITH GAUGE

Condition: new, pressure 300 t working feed 3-8 mm/sec stroke 500 mm return speed 15 mm/sec Godpjvxw Hmofx Ab Ujkf table-size 3000 x 1500 mm tank capacity 45 l travel x / y 2600 x 1000 mm daylight 500 mm total power requirement 18,5 kW weight of the machine ca. 18 t

Condition: excellent (used), Year of construction: 1970, pressure 6 t throat 250 mm stroke 550 mm table surface area 650 x 500 mm Gedovpaadspfx Ab Uokf total power requirement kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,2 x 1,0 x 2,8 m

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg Gksdpfx Asvgu Hasb Uof

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW Gkedpfx Abju Nfv Uo Ujf weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control Godpou Nfrpofx Ab Uekf accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image) Gedpfx Ajufhzvob Uekf

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Godeuddfbspfx Ab Uokf Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t Gjdst Hw Amepfx Ab Uekf dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)