Gordiusz Alfa Kft.

Condition: like new (used), Year of construction: 2020, operating hours: 3,270 h, functionality: fully functional, overall weight: 20,000 kg, Equipment: chip conveyor, documentation/manual, REIDEN RX 10 CNC control system: SIEMENS SINUMERIK 840D solution line, Sinumerik Operate 5-axis simultaneous machining 5-axis machining center with a 5-position pallet changer Travel ranges Iodpfx Asz Dn Hbjfhoig X-axis = 1,000 mm Y-axis = 1,100 mm Z-axis = 810 mm A and B axes Automatic horizontal/vertical swivel milling head as a fully functional, stepless NC axis from -1° to +90° NC rotary table NC rotary table Ø 1,000 x 800 mm - 360° continuously rotatable - Swivel circle Ø 1,350 mm - Table height above the workshop floor 1,050 mm - Max. table load 1,600 kg Main spindle drive DDT Speed 16,000 min-1 - Main drive 38 kW (100% duty cycle) - Torque 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder HSK 63-A Tool changer and tool magazine designed for 260 tools with HSK-A 63 Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter Laser tool setting, wear measurement and breakage monitoring, LC 50 version, Radio measuring probe, manufacturer Renishaw RMP 60 with HSK63-A Change station with H-gripper - Complete rotary table unit incl. zero-point clamping system - Additional pallet carrier with 4 pallet positions - Loading station that can be loaded with a crane - 5 pallets ø 1,000 x 800 mm, incl. MDynamics package for 5-axis machining - Advanced Surface application memory on CF card - Spline interpolation - Transmit and surface transformation - Automatic measuring cycles - 3D simulation - Sketching - ShopMill / ShopTurn - Work step programming - Residual material detection - Machining package for 5 axes - 3D tool radius compensation - DNC data transfer via LAN - Kinematics measurement (if measuring probe is available) - Programmed according to REIDEN standard Cooling unit / cooling system Water cooling system for milling head, rotary table motor, all feed motors and various bearing points 3 cooling circuits, cooling capacity 7 kW, tank capacity 40 l.

Condition: good (used), Year of construction: 2004, Universal machining center: Fahrständer / travelling-column Machine type: Matec 30 HV Control: Siemens 840 D Sinumerik Year: 2004 Iisdpoz Dkr Tjfx Afhog SPECIFICATIONS Travel X-Axis: 2.000 (2 x 750) mm Y-Axis: 600 mm Z-Axis: 800 mm B-Axes: +/- 105° C-Axis Spindle speeds: 15.000 rpm Spindle power: 15 kW Torque: 100 Nm Tool: HSK 63 Tool capacity: 48 NC rotary table: RW/NC-160/250 Equipment Internal cooling: 20 bar cooling system Chip conveyor Caliper separating plate Direct linear scales

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Iodpez Dgzdefx Afhjig Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Iiodpfxsz A Icys Afhsg Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning Ijdpsz A Ictjfx Afheig working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Iiodoz A Ap Ispfx Afhog Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2011, Universal machining center Travel ranges x/y/z = 3000 / 800 / 1000 mm Spindle speed up to 15,000 rpm Spindle drive power 30 kW - 190 Nm Tool magazine with 48 tool positions, HSK 63 max. tool diameter 70 / 130 mm max. tool length 340 / 450 mm max. table load 1500 kg Machine weight approx. 17,500 kg Iiedpfxsz Apfre Afheg - Oscillating operation - Coolant system - Chip conveyor - CNC control Heidenhain iTNC 530 - Integrated rotary table - Swiveling milling head, horizontal/vertical

Condition: excellent (used), Year of construction: 2008, Control system: Heidenhain MillPlus IT Ijdpfx Afez Albvohoig Travel ranges X/Y/Z: 1250 x 710 x 710 mm Spindle speed: 12,000 min-1 Tool magazine for 60 tools, SK 40 NC rotary table integrated into a fixed table, diameter 800 mm / 1500 mm x 800 mm Controlled NC swivel milling head (B-axis) including hydraulic clamping Swivel range -120/+30° Measuring probe, infrared, manufacturer: Heidenhain TS 649 3D quickSET expansion package Production package 40 bar/23 l/min (theoretical pump output), tank 600 l, paper band filter, rotating viewing window Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale Iiodpfxoz Ahgns Afhjg

Condition: refurbished (used), Year of construction: 2010, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export - very good condition Control: Heidenhain iTNC430 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 18,000 rpm Spindle mount: SK40 tool magazine: 60 seats chip conveyor: . probe: Hexagon electric handwheel: Heidenhain Iodpfx Aozz Aizjfhoig operating mode: 4 Tool measurement: Blum Laser Internal coolant supply (IKZ) and chip removal package: 40 bar High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50

Condition: refurbished (used), Year of construction: 1999, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export - new spindle: approx. 3.000 h Control: Heidenhain iTNC430 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12,000 rpm Spindle mount: SK40 Iiedpfozz Ag Tsx Afhsg tool magazine: 60 seats chip conveyor: . probe: Hexagon electric handwheel: Heidenhain operating mode: 4 Internal coolant supply (IKZ) and chip removal package: 20 bar / 900 l Tool measurement: Blum Laser High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control - HEIDENHAIN ACC "Active Chatter Control" Isdpfx Aezzp Taofhsig active chatter suppression

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC machining center Hedelius Forte 65 Single 1320 Control system: Heidenhain TNC 640 Year of manufacture: 2019 Availability: in transit Internal machine number: 74 Travel distances: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area: 1,500 x 650 mm Table load: approx. 1,200 kg Tool holder: HSK 63 Tool magazine: 65 positions Spindle speed: 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system, 900 l Iisdpfozzmirjx Afheg - Internal cooling lubricant system, 25 bar - Chip conveyor - 1x flushing gun - Electronic handwheel

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 Iiedpfxjzyy Rme Afhog - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm Iisdpfx Ajzyplgsfhjg * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: used, Year of construction: 1999, operating hours: 27,168 h, functionality: fully functional, controller manufacturer: SIEMENS, controller model: 840D, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 6,300 rpm, spindle speed (max.): 6,300 rpm, coolant supply: 20 bar, spindle motor power: 11 W, spindle nose: SK40, number of slots in tool magazine: 32, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, - Siemens 840D CNC control, simultaneous, TRAORI - Swiveling milling head (horizontal / vertical) - NC rotary table (C-axis) - 32-position tool changer Colombo - Chip conveyor Fames - Electric handwheel - Coolant system (IKZ 20 bar) Knoll / modified - Blum tool measurement - Renishaw workpiece measurement - Work area extraction system Martin Walter - Oil temperature control Cosmotec - Hydraulic system Rexroth Iodpfezyludex Afhsig - Linear scales and rotary encoders Heidenhain Travel in X-axis (longitudinal) 1200 mm Travel in Y-axis (cross) 600 mm Travel in Z-axis (vertical) 700 mm C-axis rotary table 360° B-axis milling head +/- 90° Rotary table size 800 mm Spindle taper SK40 Spindle speed (2-steps) 20-6300 rpm Number of tool positions in ATC 32 Spindle drive power 100% ED 11 kW Machine weight approx. 9000 kg Supplier

Condition: used, Year of construction: 2005, Mikron UCP1350 Available immediately! Travel: X-axis: 1,350 mm, Y-axis: 1,150 mm, Z-axis: 895 mm A-axis: degrees NC rotary table: 1.100 x 1.000 mm max. table load: 1.600 kg Spindle mount: HSK-A63 tool magazine: 60 seats Spindle speed: 15.000 U/min Control: Heidenhain iTNC530 Iodpfx Aezycl Hsfhsig Internal coolant supply (IKZ): 40 bar

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hermle U1130 5-Axis Very good condition! Available immediately! Operating hours: 35,500 h Iodpfx Afszych Ujhoig spindle hours total: only 11,000 h Maintenance measures in 2018: machine rebuild, drive, spindle: for €30,000 Travel: X-1130 mm, Y-720 mm, Z-630 mm table size: 1300 x 720 mm max. table load: 700 kg NC rotary table: 800 mm diameter, 20 rpm B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain B-axis: Control: Heidenhain iTNC530 Spindle speed: 20-18,000 rpm Spindle mount: SK40 tool magazine: 28 seats Internal coolant supply (IKZ): 40 bar Spindle cooling device: Yes probe: 3-D Heidenhain

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale Ijdpjzxzrijfx Afhjig

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw Ijdjzxzq Sjpfx Afhjig - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: good (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 11140003483, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,500 mm, total length: 4,000 mm, total width: 4,000 mm, table width: 795 mm, table length: 1,500 mm, rotary table diameter: 800 mm, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,103 h, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, DECKEL MAHO DMU 100 T Universal Machining Center - Positioning speed X/Y/Z: 20 - 2000 mm/min Iodpfozxzk Esx Afhsig - Measuring system resolution X/Y/Z: 0.001 mm - Positioning accuracy X/Y/Z: 0.010 mm - Tool holder: SK 40 - Max. tool diameter when all positions in magazine 1 are occupied: 130 mm / magazine 2: 80 mm - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 8 kg - Max. total tool weight in magazine: 160 kg - NC rotary table integrated into the fixed table - Number of T-slots: 14 / H 12 mm - Dovetail guide / one: 14 / H 7 mm - Distance between T-slots: 63 mm - Permissible load on the worktables: fixed table: 800 kg, rotary table: 500 kg - Includes the tool holders located in the tool changer Note: The machine can be transported on a truck up to 3000 mm wide! FCA D-72589 Westerheim - loaded onto a truck.

Condition: good (used), functionality: unexamined, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 12,000 mm, total width: 7,000 mm, table width: 1,000 mm, table length: 4,800 mm, rotary table diameter: 630 mm, overall weight: 25,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, MATEC 30 HV Universal Machining Center - Year of manufacture: presumably 2006 - Tool holder: SK 40 - Table with 9 T-slots - Incl. swiveling head: 360° - Incl. chip conveyor, coolant system, and safety fence Please note: the hydraulic clamping systems shown in the photos are not included in the scope of delivery! Iodpfozxzf Ajx Afhjig Please note: the machine can be transported on a standard truck! FCA D-72589 Westerheim - loaded onto a truck

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC530 Year of manufacture: 2013 Internal machine number: 44 Location: Netherlands Travel distances: Iijdpfx Afezxp Dtsheg X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm (horizontal) A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Clearance diameter: 1,600 mm, 50 rpm with torque drive Tool magazine: 60 positions Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90 kW Accessories - Chip conveyor - 5-axis simultaneous operation package - Last major maintenance in 2023 - Extraction system - Internal cooling system 70 bar - 3D measuring probe with wireless connection - Tool breakage monitoring - Handwheel with wireless control HR 550 FS

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine number: 70 Travel distances: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm (horizontal) Z-axis: 990 mm (vertical) Iijdpezxp A Njfx Afhog NC swivel head, continuously adjustable: +/- 105 degrees Tool magazine: 40 positions Tool holder: SK50 Motor spindle: 8,000 rpm / 68 kW Accessories: - Chip conveyor - Prepared for partition wall - Electronic handwheel - Internal coolant supply 20 bar (paper band filter 450 l) - Complete enclosure for the working area with roof - Flushing gun - Oil central lubrication system - Oil mist extraction system - 3D measuring probe with wireless transmission (Renishaw RMP60)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h Ijdpjzxf Inefx Afhoig EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter