Used Milling machines - univ.conv. 0-399mm X-axis travel for sale (68)

Year of construction: 1969, Condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling Fpjlhcel Dx I Sedw Djg

Condition: excellent (used), Universal milling machine Maho Type: MH 300 Drive: brake motor for milling spindles KW: 1.1 Main gear: sliding gear, geometrically stepped. - 1.25 Number of gears: 18 Folhcdwjvyuaas Djpg Table clamping area: 520 x 260 mm x-travel: 300 mm y-travel: 350mm z-travel: 200 mm Spindle mount: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Digital display Feed rates X,Y,Z Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 800 kg Location: from stock 54634 Bitburg - available immediately -

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Fpjlhcjchfyfodw Deg - used as seen -

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, machine/vehicle number: 56366, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56366 * Spindelspeeds: 100 – 2000 rpm * Angle table * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Fpjlewgx D Uehcdw Dog Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: excellent (used), quill stroke: 80 mm, Milling machine Make Korradi Type UW 003 Spindle Spindle SK 40 Table size 800 x 350 mm Folhsqfc R Escdw Djpg X path 600 mm Y path 400 mm Z path 400 mm 12 spindle speeds from 30 - 1800 na/min. Digital readout lengthwise and crosswise 18 feed steps from 6 - 270 mm/min. Vertical swivel head Quill stroke 80 mm Transport dimension : Width 1400 mm Length 1500 mm Height 1900 mm Weight 1960 kg

Condition: good (used), Year of construction: 1974, Functionality: fully functional, Deckel Freesmachine fps1/VDE Fpelhcdwjv Abxzs Deg 3 x 220 V Kan geladen worden. Prijs zonder tools 3500 Prijs met extra tools 4500 2 machines beschikbaar. Tools op foto worden verdeeld over 2 machines.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg Folhcdoiy Ekvew Depg good condition

Condition: excellent (used), feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, overall weight: 450 kg, For sale is a universal milling machine from the renowned brand EMCO (Austria). The machine is in very good working order and is equipped with an Elesta digital readout (Heidenhain scales). The machine can be viewed and tested at our premises by prior arrangement. See pictures for technical specifications and dimensions. Fpjlhjv T Ad Hjcdw Deg Scope of delivery: Emco F3 universal milling machine 3-axis digital readout with Heidenhain scales Various SK30 tool holders Operating manual Chip tray The digital display has a small mark. On the 4th seven-segment display of the X-axis, viewed from the right, the middle line is not illuminated, so some numbers look a bit strange, such as 4, 5, and 3, in fact, everywhere the middle line is needed. This shouldn't be a major problem, however, as the display still counts perfectly. Shipping conditions: EXW We can assist with loading. A suitable forklift is available. We would also be happy to recommend a shipping company. Please contact us. As is customary with used machines, any warranty (liability for material defects) is excluded. All information is provided to the best of our knowledge and belief. We reserve the right to make errors.

Year of construction: 1976, Condition: reconditioned (used), Universal tool milling machine Make: DECKEL Model: FP 1 Year of construction: 1976 - workshop tested Fpolhcdweflc N As Djg Machine no.: 53426/08 geometric acceptance with test report Accessories: - 3-axis digital display Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Condition: excellent (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 56283, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56283 * Spindelspeeds: 100 – 2000 rpm * turn tilt tilt table * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. Fpslhcdewgxxxew Djg * 3 pc cutter holders * 1 drill chuck * machine clamp * Pulrod for horizontal milling * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: good (used), Year of construction: 1964, Machine is in good condition! Folhsilg H Eecdw Depg Tool holder: SK 40 travels X/Y/Z: 500 / 200 / 400 mm speed range: (18 steps) 40 - 2000 rpm spindle stroke vertical: 60 mm spindle stroke horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 300 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm head swivels: 90° / 90 Equipment: - 3-axis digital display - Coolant device We would be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Fpjletwlwzjhcdw Djg >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1979, Manufacturer: MAHO milling machine - top condition as a training machine - Little used - Special price: 7500 euros net plus VAT = 8925 euros gross including VAT Model: MH 300 Travel paths: x: 300 mm Y: 350 mm z: 200 mm Swivelling head with SK40 mount Quill feed Adjustable axis feed Fpslhcdwjvv N Uwo Dog Clamping table: 500 x 260 mm Location: from stock 54634 Bitburg - available at short notice -

Condition: used, Year of construction: 2023, gebraucht Folewirdgehcdw Dspg 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 39.600,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: new, Universal milling machine Make: OPTimill Model: MT 60 Item no.: 3336090 Condition: New machine Fpolheg Anfnocdw Djg Travels: - X-axis 750 mm - Y-axis 230 mm - Z-axis 360 mm equipped as standard with - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - B 18 drill chuck holder - Gear rim drill chuck 3-16 mm / B 18 - Reducing sleeve MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - T-nuts - Coolant device - LED lamp - Operating tool - Operating instructions

Condition: excellent (used), Year of construction: 2013, Functionality: unexamined, machine/vehicle number: 1803007, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, tool mount: 40 mm, total height: 2,000 mm, total width: 1,300 mm, total length: 2,100 mm, table width: 400 mm, table length: 800 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 1,500 kg, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, Connected load: 3 kW Fpjlhcdowdn Anow Dog EQUIPMENT: Three-axis digital display (SINO)

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Fslhcjum Rpyjdw Depg Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Year of construction: 1969, Condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model : FW 800 Machine No. : 304 Year of manufacture: 1969 Weight: approx. 1000 KG General / technical data: well preserved used horizontal milling machine with hydraulic program control (cam control bar) for automatic production process. admission: SK 30 travel: X 400mm Y 370mm Z 165mm Speed: 18 pieces mechanically switched in 2 motor steps 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm feeds: in X and y axis stepless hydraulic in z ( horizontal milling spindle) manual table dimensions (rigid table): 800mm x 220mm power supply / spindle motor power: 380Volt 50 HZ / 1,5 KW approx. space requirement of the machine: 1900mm x 1100mm x 1700mm (bxtxh) Accessories / special equipment: - Rigid fraestable - Item various tool holders - spittoon - cooling device - Machine documentation with program instructions Remarks Fpjlodgrwdshcdw Deg The machine is in a very good condition according to its age. The machine is preferably designed for the production of small and medium series. The machine has a simple hydraulic program control controlled by a cam switch.

Condition: good (used), Functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Fpelewbqnhehcdw Dsg Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, Year of construction: 2004, gebraucht 2004 4540 prompt, Zwischenverkauf v Österreich 23700 € 1 19900 € 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes Folowirmnehcdw Dspg ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: Fpolsbnfxujhcdw Dog - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: excellent (used), Year of construction: 2017, Functionality: unexamined, machine/vehicle number: 173902, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 1,500 mm, total width: 1,100 mm, total length: 1,400 mm, table width: 200 mm, table length: 600 mm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 80 rpm, overall weight: 800 kg, input current: 16 A, - Operating voltage: 3 x 400 V - Frequency: 50 – 60 Hz - Number of table slots: 4 - Tool holder: SK 30 Fpeljwdnz Djhcdw Djg EQUIPMENT: - Three-axis digital readout (Heidenhain) - Collet set included

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm turning speeds 2.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Fpolsv Irk Sshcdw Deg Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 360 mm, For sale is a Deckel FP1 with 3-axis active control system The machine is fully functional and will be checked, cleaned and put into stock in our incoming goods department. Technical data: Digital display 3-axis active digital readout HEIDENHAIN X-axis travel 300 mm Y-axis travel 160 mm Z-axis travel 340 mm Tool holder: SK 40 Milling head type. Vertical milling head Speed range: 40 - 2000 mm/rev Number of steps: 16 Feed X-axis 290 mm Y-axis feed 150 mm Feed Z-axis 330 mm Machine weight 650 kg Machine dimensions 1200 x 1100 x 1800 mm Accessories - Active function in X-, Y- and Z-axis - Coolant device Felhor H E Uijcdw Depg The offer refers only to the machine without tools, this can be negotiated additionally On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Working travels 300x135x300mm Fjlhcdwjd Hmnce Depg Table size 590x210mm Spindle taper for collets W20 Spindle speeds 100-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH