Onery International GmbH

Condition: used, Year of construction: 1988, Immediately available from the racing department: Hydraulic four-column press, Hymag Type HS 4 – 160 k Year of manufacture 1988 Pgedpfjzwucfjx Ac Hjr Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Stroke 500 mm Drive power 11 kW Weight 7 tons

Condition: used, Maximum pressing force: 3,150 kN Stroke rate: 15-80 strokes/min Ram adjustment: 10 mm Stroke: 200 mm Pedpfx Aozwf Tnjc Hsgr Voltage: 400 V Motor power: 30 kW Connected load (total power): 65 kW Weight: approx. 17,000 kg Two-hand safety distance: 198 ms

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Podpfxszv T Iwe Ac Hogr

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Pgjdpfx Acezvy Hae Hsr

Year of construction: 1980, condition: ready for operation (used), overall weight: 25,000 kg, pressing force: 408 t, stroke length: 1,490 mm, table length: 4,500 mm, table load: 60,000 kg, table width: 2,500 mm, Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details. Pressing Force • Ram Force: 4000 kN • Table Ejector Force: 200 kN • Ram Cushion Force: 2000 kN Stroke • Ram Stroke: 1490 mm • Table Ejector Stroke: 550 mm • Ram Cushion Stroke: 200 mm • Max. Stroke: 900 mm (UT) Working Area • Ram Cushion Surface: 4000 × 1500 mm • Max. Tool Installation Height: 2390 mm • Max. Travelling Table Load: 60 t Clamping Surfaces • Ram & Additional Clamping Plate: 4500 × 2500 mm • Travelling Table: 4500 × 2500 mm Additional Information Pgedpfezvyzwsx Ac Hsr • Oil Capacity: 3000 l HLP46 • Oil Cleanliness Class: 15/13/10 according to ISO 4406 • Travelling Table: Max. Load 60 t

Condition: good (used), Table press Pedpfx Acszvw R Ae Hegr Storage number: Year of manufacture: 1986 Machine number: 599 Manufacturer: Robotron Dresden Press type: PETSe 0.5 Type: 2-column table press Table area: 280 x 280 mm Overhang: 55 mm Pressing force: 0.5 t Distance table – ram: 60 to 220 mm Stroke: approx. 10 to 20 mm Column passage: 90 mm Dimensions: 340 x 500 x 600 mm Features: Single and continuous stroke, 2-hand operation Condition: good, ready for use Weight: 69 kg

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) CE marked: Yes PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Pgodpfxjzvnr Ro Ac Hsr Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Pedpozvnqtjfx Ac Hsgr Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: ready for operation (used), Year of construction: 1984, Machine Identity & Compliance Manufacturer: Schmid (Feintool Schmid) Model / Type: T6-200 2 Year of Manufacture: 1984 Machine Serial Number: 20-1200 Internal Plant Asset ID: MK18166 / DB04134 Safety Certifications: CE Compliant Inspection Authority: TÜV Rheinland Operational Metrics & Current Counters Total Operating Hours: 110,777.4 Hours Total Stroke Count: 19,333,830 Total Strokes (Totalhübe) Mechanical & Force Profile Total Nominal Press Force: 2,000 kN (Approx. 204 Metric Tons) Downward Ejection Force: 400 kN Lower Ejector Stroke: 60 mm Maximum Slide Stroke: 200 mm Slide Range (Max Forming): 195 mm Slide Stop Adjustment Range: 75 mm Velocity & Frequency Ratings Rapid Approach Speed: 240 mm/s Return Stroke Speed: 240 mm/s Maximum Forming Speed: Approx. 26 mm/s Max Wobble Frequency: 340 cycles per minute (1/min) Fluid, Pressure & Lubrication Specifications Hydraulic Oil Capacity: 950 Liters Maximum Hydraulic Pressure: 320 bar Pjdpfx Aozvnicsc Hegr Lubricating Oil Capacity: 100 Liters Maximum Lubrication Pressure: 550 bar Tooling Area & Configuration Setup Kinematic Type: Orbital / Wobble cold compression forming mechanism (Taumelantrieb) featuring a central heavy-duty guide pin. Die Space Requirements: Stamped for lower die installations using new mounting hardware (Einbau Untergesenk - Bitte mit neuen Schrauben). Integrated Safety Features: Electronic die protection circuitry (Gesenkschutz). Ejection Control: Upper and lower programmable ejection logic (Ausstossen). Air Cleanout Circuit: Pneumatic parts/debris blowout valve (Blasen). Logistics, Power & Automation Infrastructure Electrical Supply: 3-Phase / 400 V / 50 Hz Net Machine Weight: Approx. 10,200 kg (10.2 Metric Tons)

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Pgsdpozun T Sofx Ac Hjr

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Pgodpfx Acjzun T Es Her

Condition: used, functionality: fully functional, The press is operating. Pedpfx Aezr Hddjc Hegr

Year of construction: 1978, condition: ready for operation (used), Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible. Pgedpjzrzpzsfx Ac Hjr

Year of construction: 1974, condition: ready for operation (used), Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement. Pgodpezrzp Isfx Ac Her

Year of construction: 1976, condition: ready for operation (used), A single-column eccentric press is offered. Press force: 25t, throat depth: 200mm, adjustable stroke range: 8mm-80mm, maximum stroke rate: 180strokes/min, table area X/Y: 560mm/400mm, ram area X/Y: 355mm/220mm, ram adjustment: 50mm, maximum shut height: 320mm. Machine weight: approx. 2150kg. Inspection by appointment is possible. Pedpjzrzp Uofx Ac Hsgr

Year of construction: 1978, condition: ready for operation (used), A Schuler C-frame eccentric press is offered. Press force: 80t, throat depth: 280mm, adjustable stroke range: 20mm-160mm, max. stroke rate: 125strokes/min, table area X/Y: 700mm/560mm, slide area X/Y: 560mm/350mm, slide adjustment: 72mm, max. distance between table and slide: 510mm. Machine weight: approx. 4800kg. Inspection possible by appointment. Pgjdpfjzrzpuex Ac Hor

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Psdpfx Acszrn H Hj Hjgr

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Pgodpfxezrhhqo Ac Hor

Year of construction: 2006, condition: used, machine/vehicle number: 10510, Drive power: 138 kW, clamping force: 4,500 kN, machine weight: approx. 74,000 kg, max. tool weight: 7,500 kg, tool dimensions: approx. 2,150 x 1,300 mm, stroke: approx. 61 mm, SIEMENS SIMATIC C MULTI PANEL control, two-hand operation, upstream light curtain, separate RITTAL control panel system, cooling system, including accessories: 1 workbench, 1 sheet metal cabinet, contents: various hand tools. Pedpfx Acezqzd As Hsgr

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Pgodpszqzd Nefx Ac Hjr

Year of construction: 1998, condition: ready for operation (used), 200 Ton press 230mm stroke Speed 25-35 SPM Die height 500mm slide adjustment 110mm Main motor 20HP Air pressure 5kg/cm2 Podpfx Acjzp Dnzs Hogr Y.O.M 1998

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Podpfxjzpyx Ao Ac Hsgr

Condition: new, functionality: fully functional, PRESSA IDRAULICA ELETTROMECCANICA 100 TON, FERVI P001/100EP400V Pgedpfxeznvbdj Ac Hjr

Year of construction: 1976, condition: used, Year of manufacture: 1976, overhauled: 2003 Pedezmh Rhopfx Ac Hegr Maximum pressing force: 500 KN, Maximum extraction force: 400 KN, Maximum holding force in the pressing position: 400 KN, Maximum die return force: 20 KN, Upper punch stroke: 120 mm, Upper punch section: 220 mm, Number of strokes: 7-32 1/min, Maximum filling height: 180 mm, Maximum pressing stroke: 90 mm, Maximum extraction stroke: 90 mm, Maximum pressing stroke: 12 mm, Pneumatic upper punch tension: Maximum: 100 mm, Compressed air supply, Air consumption, Intake air: 200 1/min, Total connected load: 18.00 kW, approximate width: 2000 mm, approximate depth: 1700 mm, approximate height: 3250 mm, press weight (approximate): 5,500 kg, press housing: 190 l (running oil), operating noise: 78 dB (A)

Year of construction: 1969, condition: ready for operation (used), A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of manufacture: 2004, max. press force: 6300kN, slide stroke: 240mm, strokes: 40/min, max. slide adjustment: 100mm, max. shut height: 525mm, table dimensions X/Y: 1200mm/1500mm, slide dimensions X/Y: 1050mm/1100mm, main motor power: 110kW, weight: approx. 110t. 3) Decoiler Roland Dreher 2398 G-SP, year of manufacture: 2004, max. load capacity: 25500kg, max. strip width: 1050mm, coil inner diameter range: 475mm-615mm, max. coil outer diameter: 2000mm. 4) Straightening feeder Roland Dreher 1689 G-SP, year of manufacture: 2004, strip width range: 100mm-1050mm, max. strip thickness: 12.4mm, max. strip cross-section: 6000mm², straightening rolls: 6, straightening roll diameter: 100mm, infeed and outfeed rolls: 4, diameter: 140mm, max. feed speed: 50m/min, feed accuracy: 0.1mm, transverse travel: +/-400mm. 5) Transfer feeder Roland Dreher 700/160/50, year of manufacture: 1994, feed length: 700mm, closing stroke: 160mm, lifting stroke range: 0mm-50mm, max. rail spacing: 1190mm, strokes: 24/min. 6) Central component oiling and processing system Leblein, control system: Siemens S7-300. 7) Line control system and electrical cabinet Siemens S7-317 with two decentralized Siemens ET200M units, modernization year: 2011. Including additional peripheral equipment such as feeding, marking, hydraulics, conveying, etc. Documentation available. An on-site inspection is possible. Pjdpfxezl U H Tj Ac Hogr