Used measuring systems for sale (283)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Bdjdpfx Alezv Rhus Usg Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Bdedpfx Aljzx N Rgj Ueg Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Calibration documentation Technical documentation Manual Note: The laptop and PolyWorks software are not included in the offer.

Condition: excellent (used), FARO Gage Plus F4 3D Coordinate Measuring Arm Manufacturer: FARO Model: Gage Plus F4 Machine Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 For sale is a used FARO Gage Plus F4 3D coordinate measuring arm with CAM2 SmartInspect Pro software and a comprehensive range of measuring, tooling, and accessories. This mobile measuring arm is suitable for industrial measuring and testing tasks, quality assurance, as well as the acquisition and control of component geometries. Technical Data: Model: Gage Plus F4 Device Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 Accuracy Specification: 5 + 8L/1000 µm Certification Date: 12.06.2019 Country of Manufacture: Switzerland Software: FARO CAM2 SmartInspect Pro Software key as shown in the images USB stick as shown in the images Equipment: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the images Measuring and probing accessories as shown in the images Tool and accessory case FARO protective cover Documentation / documents as shown in the images Additional accessories as shown in the images Dimensions: Dimensions of the measuring arm: not clearly specified Bdjdpfxjzxy Sbo Al Uog Transport Data: Transport dimensions: not clearly specified Weight: not clearly specified Shipping or freight forwarding possible Condition: Used Optical condition as shown in the images. Nameplate present. Scope of delivery: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the images Tool and accessory case Measuring and probing accessories as shown in the images FARO protective cover Documentation / documents as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: Bdedpjzxqxfsfx Al Ujg 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, functionality: fully functional, Geosig Accelerometer with recorder Bedpfxeq S Uz Ue Al Uodg GeoSIG GMS plus Recorder model no GMSplus-IP67 Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is used. We have a stock of approximately 100 used sensors and 100 used recorders available.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results Bdodpfxezwd Hyo Al Ujg High sensitivity and wide dynamic range Designed for industrial and laboratory use Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos

Condition: used, Year of construction: 2015, Year of construction 2006 CNC controlled video measuring device Measurement software MeasureMind 3D Touch Probe TP200 PC system and 2 x TFT monitor Reflected light, transmitted light, Xoaxiallicht LED ring light Further equipment, software modules, probe changers and accessories optional. Installation and commissioning, individual training possible with us in Remscheid or at your location. Bdedpozvl Suofx Al Ujg

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Bdodozx Rtvopfx Al Usg Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: excellent (used), IM-6600 measuring system IM-6120 measuring head CMOS sensor: 6.6 MP monochrome 10.4" display LCD color monitor Field of view: φ100 x 200 mm Smallest display unit: 0.1 μm Telecentric transmitted light illumination (4-segment ring) Measuring accuracy: Wide-field measuring mode: ±5 μm Bedpfxozcd A Te Al Uedg High-precision measuring mode: ±2 μm Measuring mode with large field of view: ±7 +0.02L μm Measuring mode with fixed position: ±4 +0.02L μm Table: X-axis: 100 mm Z-axis: 30 mm Load capacity: 1 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Bjdpfxezvrmxo Al Uodg Complete with case as pictured

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: Bdsdpswzlcajfx Al Uog The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour X 280mm (XL) 360mm Measuring range Roughness Z 350mm (XL) 550mm Suitable range Ra Ra from 0.08µm* Suitable range Rz Rz from 0.8µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: new, warranty duration: 24 months, measuring range X-axis: 300 mm, measuring range Z-axis: 370 mm, overall weight: 95 kg, Modular extensible Contour measuring system Anytime optionally via software updatable functions: - up-down-directions Z-Scanning - option Roughness measurement - motorized Y-Supporting table - axis of rotation for contour and roughness Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - PC W11/64Bit; 24"TFT flat screen; - CunturoMatic Software; user manual - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - Protective cover 8988, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of lead deviation Bjdjgr Uzcepfx Al Uodg - Thread testing etc. Technical data contour measurement: X-Measuring range 300mm Z-Measuring range 375mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0.9µm+L/100)µm* [L=mm] Measuring speed 0.1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Technical data roughness measurement: Diamond tip Cone 60° R=2µm Z-Measuring range +/-500 µm Scope Ra > 0.08µm | Rz> 0.8µm Probing force 7.5mN Measuring speed 0.1mm/s * According to our specified terms- Subject to change without notice without fixing system

Condition: like new (used), Year of construction: 2024, bolt circle diameter: 2,500 mm, FARO Quantum X.S Max 2.5m – 2024 + PolyWorks|Inspector Probing A very recent FARO Quantum X.S Max 2.5m from 2024 – complete with ISO 10360 calibration, PolyWorks|Inspector, and training. Are you looking for a high-quality, accurate, and flexible mobile 3D measurement solution? This FARO Quantum X.S Max 2.5m offers a complete solution that allows you to get started right away. The Quantum X.S Max was manufactured in 2024 and is the high-end Max version within the FARO Quantum series. The arm is offered in a probing configuration and is delivered complete with PolyWorks|Inspector™ for tactile 3D measurements and training. Specifications Manufacturer: FARO Model: Quantum X.S Max Year of manufacture: 2024 Measurement range: 2,500 mm Version: 7-axis measuring arm Configuration: Tactile Probing 3 mm iProbe 6 mm iProbe Original transport case FARO Fold tripod Mounting plate Calibration set Power supply/battery and accessories Calibrated according to ISO 10360 The FARO Quantum X.S Max is calibrated according to ISO 10360 before delivery. With this, you will not just receive a used measuring arm, but a professional measurement solution whose performance is checked and documented before delivery. Including PolyWorks|Inspector version 2026 The measuring arm is delivered with PolyWorks|Inspector for probing, which provides you with a powerful and user-friendly software environment for, among other things: Dimensional and geometric inspections GD&T checks Alignments CAD-to-part inspections Graphical measurement reports Digital inspection reports Repeat measurements and series inspections Training included Training is included with the purchase of this complete solution. During the training, the user will receive practical guidance on working with the FARO measuring arm and PolyWorks|Inspector. This allows you to quickly and effectively use the combination within your own measurement environment. Complete measurement solution You will receive: Bjdpozvyxpofx Al Ujdg FARO Quantum X.S Max 2.5m + 3 mm & 6 mm iProbe + FARO Fold tripod + ISO 10360 calibration + PolyWorks|Inspector Probing + Training One complete package, so you can start professional mobile 3D measurements right away. Why choose this combination? Very recent measuring arm from 2024 High-quality Quantum X.S Max version Practical measurement range of 2.5 meters Calibrated according to ISO 10360 Including PolyWorks|Inspector Including training Complete hardware and software solution An interesting alternative to investing in a completely new system A complete, professional mobile measurement solution for a significantly more attractive investment than a new one. Contact us for price, availability or more information.

Condition: new, ID 376 846-E8 SN 17 404 874 Type: Rotary encoder ROD 426 2500 03S12-03 Bdsdpfx Aeylc Dhel Usg Condition: New Stock number: 2065-T503 HEIDENHAIN rotary encoders are used in industrial applications to measure the and position of axes in machines, robots, machine tools and other automated systems. and other automated systems.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 230 V, bolt circle diameter: 1,000 mm, arm reach: 2,000 mm, Equipment: documentation/manual, A FARO measuring arm is used for precise, portable 3D measurements and quality control across various industries as it enhances the accuracy of traditional measuring methods, reduces errors, provides reliable data for decision-making, and increases efficiency through direct integration with computer-driven processes and software. Why use a FARO measuring arm? Accuracy and Precision: A FARO measuring arm delivers highly accurate 3D measurements, resulting in more consistent and reliable outcomes compared to manual methods. Portability: The arm is portable and can be easily transported and set up at different locations, allowing for flexibility within the measurement process. Quality Control: Bdsdpfx Asw U Atbjl Ujg Manufacturers use the measuring arm for 3D inspections, CAD comparisons, and dimensional analyses to verify and ensure product quality. Efficiency: By providing immediate, precise data, the measuring arm helps prevent errors, reduces rework, and streamlines production processes, leading to faster product delivery and higher customer satisfaction. Data for Decision-Making: The collected measurements provide dependable information that can be used for trend analysis and smarter decision-making by the team. Versatility: The measuring arm can be employed for diverse applications such as reverse engineering, tool certification, and inspection of complex geometries, making it a valuable tool in different production sectors.

Condition: good (used), MASS FLOW TRANSMITTER-PD340 Item: D_1596-Flowmeter-PD340, Digital flow meters Mass Flow Transmitter with or without display Bdodpshcpwtofx Al Ueg (New or used) PD340. Ø 1" - 4". For more informations please contact us!

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Bedpfezk I T Rox Al Ujdg Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Bjdpfx Aozbvqyel Ujdg Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Year of construction: 2011, condition: excellent (used), machine/vehicle number: F04-02-11-26923, Technical specifications Manufacturer: FARO Type: GAGE PLUS Year of manufacture: 2011 Certificate date: 02/04/2021 Revision: 28.1 Serial number: F04-02-11-26923 Accuracy: 5+8L/1000 (µm) Bdodpfxeich H Ro Al Uog The machine can be upgraded with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Year of construction: 2011, condition: excellent (used), machine/vehicle number: F04-02-11-26919, Technical Data Manufacturer: FARO Type: GAGE PLUS Year of Manufacture: 2011 Bsdpsich H Aofx Al Ujdg Certificate Date: 03/02/2020 Revision: 28.1 Serial Number: F04-02-11-26919 Accuracy: 5+8L/1000 (µm) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale!)

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: ZEISS VAST XXT TL3. Bdodpfx Aszuur Ijl Uog ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Condition details: New, never installed/used Complete accessory set as pictured

Condition: like new (used), functionality: fully functional, For sale is 1x Kistler maXYmos BL evaluation unit with the article number 5867B1011. XY monitor for good/bad assessment of curve profiles Table/wall mounting Sensor channel Y: for strain gauge sensors, +/-10V Sensor channel X: for potentiometers, +/-10V Fieldbus: Selectable - Ethernet/IP, EtherCat, or PROFINET for process values and control Digital I/O (24V) for control and results Measurement functions: Box, Line, Envelope Evaluation elements: Box, Line, Envelope 4 evaluation elements per curve 16 measurement programs for 16 different parts Bdjdpfezxz Epox Al Usg Up to 8,000 XY value pairs per curve Short evaluation time, up to 10 parts/second 2 switching signals in real-time for X and Y thresholds USB for notebook (PC program maXYmos PC) Info pages for NIO cause diagnosis Internal serial number generator with selectable format Warning and alarm messages can be freely assigned Access protection for different user groups 3.5" color touchscreen Power supply 24 VDC The item comes from stock/spare parts inventory. The optical condition can be seen in the attached pictures. We will gladly provide further technical documents or detailed pictures upon request. Inspection and collection are possible by arrangement. Shipping is possible for an additional charge. Subject to prior sale, errors and changes.

Condition: used, Surface measuring instrument Mahr Perthometer S2 Used, as shown in the pictures From stock (may have storage marks) Bsdszkl Dyopfx Al Ujdg Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Information about bank details, payment terms, etc. will be sent to you by email. W120

Condition: good (used), Offered here is a measuring microscope from the manufacturer Mahr. Manufacturer: Mahr Type: WMZ Serial No.: M-073-08 Bdodpezu I Enjfx Al Uog

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 For sale is a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. The system is in very good technical and optical condition and has been regularly maintained. The laser scanner has a current calibration. Ideally suited for 3D measurement technology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Equipment Nikon MCAx30+ 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Bdjdpfxozxz Ike Al Ueg Current calibration of the H120 scanner Transport case for the measuring arm Separate transport case for the scanner Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, immediately ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. The system has been carefully handled and, due to the current calibrations, can be used directly for professional measurement tasks. The MCAx30+ offers high flexibility in mobile 3D measurement technology due to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both classical tactile measurement and the rapid, non-contact acquisition of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measurement package. Inspection and functional testing are possible after prior arrangement. The sale is preferably as a complete system. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.